An Integrated Two-Stage P/VSA Process for Postcombustion CO2 Capture Using Combinations of Adsorbents Zeolite 13X and Mg-MOF-74
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
An integrated two-stage pressure/vacuum swing adsorption (P/VSA) process for postcombustion CO 2 capture from dry flue gas has been simulated and optimized. In the first stage CO 2 is concentrated to 40–60% at almost atmospheric pressure, and in the second stage it is further concentrated to 95%. A two-bed six-step cycle configuration was employed in the first stage, while a two-bed five-step cycle configuration was used in the second stage. All possible combinations of two different types of adsorbents (zeolite 13X and Mg-MOF-74) have been employed to study the effect of adsorbent type on key process performance indicators of the process under consideration. The results from systematic comparative simulations demonstrate that the combination of adsorbents zeolite 13X–Mg-MOF-74 has the best process performance, in terms of CO 2 purity and CO 2 recovery, followed by the use of zeolite 13X at both stages of the process. Furthermore, process optimization studies employing the above combinations of adsorbents have been performed to minimize energy consumption for specified minimum requirements in CO 2 purity and in CO 2 recovery. The optimization results indicate that the minimum target of 95% in CO 2 purity and 90% in CO 2 recovery is met for the integrated two-stage P/VSA process, for both combinations of adsorbents at different operating conditions, resulting in different energy requirements and CO 2 productivities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Cycle Development and Design for CO 2 Capture from Flue Gas by Vacuum Swing Adsorption
Zhang, J., & Webley, P. A. (2008) · Environmental Science & Technology · doi:10.1021/es0706854 · Cited by 132
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Present and future of MOF research in the field of adsorption and molecular separation
Petit, C. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2018.04.004 · Cited by 292
Maruyama, R. T., Pai, K. N., Subraveti, S. G., & Rajendran, A. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2019.102902 · Cited by 68
Metadata
- Authors
- Nikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-01-17
- Volume
- 56
- Issue
- 4
- Pages
- 974-988
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2571062424
- Cited by
- 80
- References
- 3
- FWCI
- 6.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Integrated Two-Stage P/VSA Process for Postcombustion CO2 Capture Using Combinations of Adsorbents Zeolite 13X and Mg-MOF-74. https://app.cochat.ai/papers/10.1021/acs.iecr.6b04270
- The paper
- Nikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C. (2017). An Integrated Two-Stage P/VSA Process for Postcombustion CO2 Capture Using Combinations of Adsorbents Zeolite 13X and Mg-MOF-74. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6b04270
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.