Production and Characterization of Pyrolysis Oil from Sawmill Residues in an Auger Reactor
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this study, the significant process variables of a pilot auger reactor (i.e., temperature, feed flow rate, and the vacuum fan speed) are investigated to optimize pyrolysis oil (py-oil) yield and properties. The auger reactor uses steel shot as a heat carrier and operates without inert carrier gas. For the pyrolysis of softwood shavings, the optimum conditions are 450–475 °C temperature, a 4 kg/h feed flow rate, and a 2415 rpm vacuum fan speed producing an oil yield of 53%. The water content of the oil was minimized under these conditions to 24–26% and produced a single phase liquid. Hardwood sawdust (HW), Softwood shavings (SW), and Softwood Bark (SB) were pyrolyzed at these conditions to compare py-oil yield and chemical and physical characteristics, such as chemical composition, water content, total acid number (TAN), pH, density, viscosity, solids content, and HHV. The chemical components in py-oil were identified by GC-MS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Cited by
Auger reactors for pyrolysis of biomass and wastes
Campuzano, F., Brown, R. C., & Martínez, J. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 339
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
A review on condensing system for biomass pyrolysis process
Papari, S., & Hawboldt, K. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.08.001 · Cited by 141
Self-citationNitrogen Functionalized Biochar as a Renewable Adsorbent for Efficient CO2 Removal
Bamdad, H., Hawboldt, K., & MacQuarrie, S. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03056 · Cited by 64
Self-citationApplication of biochar for acid gas removal: experimental and statistical analysis using CO2
Bamdad, H., Hawboldt, K., MacQuarrie, S., & Papari, S. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04509-3 · Cited by 42
Self-citation
Metadata
- Authors
- Papari, S., Hawboldt, K., & Helleur, R.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-16
- Volume
- 56
- Issue
- 8
- Pages
- 1920-1925
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2586732805
- Cited by
- 33
- References
- 2
- FWCI
- 1.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.