CoChat

Production and Characterization of Pyrolysis Oil from Sawmill Residues in an Auger Reactor

Papari, Sadegh, Hawboldt, Kelly, Helleur, Robert · 2017 · Industrial & Engineering Chemistry Research
Cited by 33

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

In this study, the significant process variables of a pilot auger reactor (i.e., temperature, feed flow rate, and the vacuum fan speed) are investigated to optimize pyrolysis oil (py-oil) yield and properties. The auger reactor uses steel shot as a heat carrier and operates without inert carrier gas. For the pyrolysis of softwood shavings, the optimum conditions are 450–475 °C temperature, a 4 kg/h feed flow rate, and a 2415 rpm vacuum fan speed producing an oil yield of 53%. The water content of the oil was minimized under these conditions to 24–26% and produced a single phase liquid. Hardwood sawdust (HW), Softwood shavings (SW), and Softwood Bark (SB) were pyrolyzed at these conditions to compare py-oil yield and chemical and physical characteristics, such as chemical composition, water content, total acid number (TAN), pH, density, viscosity, solids content, and HHV. The chemical components in py-oil were identified by GC-MS.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.iecr.6b04405

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 33

Metadata

Authors
Papari, S., Hawboldt, K., & Helleur, R.
Venue
Industrial & Engineering Chemistry Research
Published
2017-02-16
Volume
56
Issue
8
Pages
1920-1925
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2586732805
Cited by
33
References
2
FWCI
1.63
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.