An Ionophore for High Lithium Loading and Selective Capture from Brine
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
The continuous demand and uneven dispersal of natural mineral resources of lithium with a low recycling rate of lithium commodities have forced researchers to look for alternative resources like geothermal brine, brackish brines, and sea brines. But selective lithium-ion extraction and even lithium-ion binding from these aqueous systems is a recognized challenge due to very high hydration energy and the coexistence of other like metal ions but appealing due to economic benefits. Therefore, the designed synthesis of synthetic ionophores with high lithium selectivity is crucial as they can work on dilute conditions without removal of interfering metal ions. However, most of the lithium selective ionophores known in the literature are mononucleated, and no emphasis is given on designing multinucleating ionophore systems to improve the lithium loading capacity which will open up unexplored paths toward the development of a more sustainable and economical extraction process. Herein, we describe a rare fluorogenic macrocyclic ionophore with two binding pockets for selective lithium recognition and extraction among various major alkali and alkaline earth metal ions of oceanic presence through both solid-state and solution studies. Under solid-liquid extraction conditions, this receptor shows a high lithium loading capacity of 135% with LiClO 4 and 69.16% with LiCl salt with exclusive selectivity. Under liquid-liquid extraction conditions, this ionophore shows a loading capacity of 27% with 1 M LiCl and 48.57% with 1 M LiClO 4 source phase concentration. This new ionophore, therefore, inspiring further to modify and develop a better multinucleating extractant with high lithium loading capacity which is rare in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The environmental impact, in terms of CO2 emissions, can be significant if the energy required for the regeneration process is derived from non-renewable sources [61].”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [61]
Citations
Cites
Brynn Hibbert, D., & Thordarson, P. (2016) · Chemical Communications · doi:10.1039/c6cc03888c · Cited by 1,025
Grosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847
Kang, D. H. P., Chen, M., & Ogunseitan, O. A. (2013) · Environmental Science & Technology · doi:10.1021/es400614y · Cited by 599
Xiao, J., Li, J., & Xu, Z. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02561 · Cited by 418
Lithium Resources and Production: Critical Assessment and Global Projections
Mohr, S. H., Mudd, G. M., & Giurco, D. (2012) · Minerals · doi:10.3390/min2010065 · Cited by 350
Electrostatic Control of Aromatic Stacking Interactions
Cockroft, S. L., Hunter, C. A., Lawson, K. R., Perkins, J., & Urch, C. J. (2005) · Journal of the American Chemical Society · doi:10.1021/ja050880n · Cited by 331
Paranthaman, M. P., Li, L., Luo, J., Hoke, T., Ucar, H., Moyer, B. A., & Harrison, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03464 · Cited by 293
Choubey, P. K., Chung, K.-S., Kim, M.-S., Lee, J.-C., & Srivastava, R. R. (2017) · Minerals Engineering · doi:10.1016/j.mineng.2017.04.008 · Cited by 290
Lo, H. C., Buriez, O., Kerr, J. B., & Fish, R. H. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19990517)38:10<1429::aid-anie1429>3.0.co;2-q · Cited by 230
Host-guest complexation. 35. Spherands, the first completely preorganized ligand systems
Cram, D. J., Kaneda, T., Helgeson, R. C., Brown, S. B., Knobler, C. B., Maverick, E., & Trueblood, K. N. (1985) · Journal of the American Chemical Society · doi:10.1021/ja00298a040 · Cited by 182
A Self-Assembled Metallomacrocyclic Ionophore with High Affinity and Selectivity for Li+ and Na+
Piotrowski, H., Polborn, K., Hilt, G., & Severin, K. (2001) · Journal of the American Chemical Society · doi:10.1021/ja005804t · Cited by 173
Global Lithium Flow 1994–2015: Implications for Improving Resource Efficiency and Security
Sun, X., Hao, H., Zhao, F., & Liu, Z. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b06092 · Cited by 152
Design of lithium selective crown ethers: Synthesis, extraction and theoretical binding studies
Torrejos, R. E. C., Nisola, G. M., Song, H. S., Limjuco, L. A., Lawagon, C. P., Parohinog, K. J., Koo, S., Han, J. W., & Chung, W. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.005 · Cited by 150
Selective Solid−Liquid Extraction of Lithium Halide Salts Using a Ditopic Macrobicyclic Receptor
Mahoney, J. M., Beatty, A. M., & Smith, B. D. (2004) · Inorganic Chemistry · doi:10.1021/ic049066b · Cited by 143
He, Q. G., Williams, N. J., Oh, J. H., Lynch, V. M., Kim, S. K., Moyer, B. A., & Sessler, J. L. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201805127 · Cited by 141
pH-Triggered Assembly of Organometallic Receptors for Lithium Ions
Grote, Z., Scopelliti, R., & Severin, K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja044874n · Cited by 133
He, Q. G., Zhang, Z., Brewster, J. T., Lynch, V. M., Kim, S. K., & Sessler, J. L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05713 · Cited by 121
An Electrochemical Cell for Selective Lithium Capture from Seawater
Kim, J.-S., Lee, Y.-H., Choi, S., Shin, J., Dinh, H.-C., & Choi, J. W. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00032 · Cited by 109
Lithium ion selective electrodes based on crown ethers for serum lithium assay
Kimura, K., Oishi, H., Miura, T., & Shono, T. (1987) · Analytical Chemistry · doi:10.1021/ac00146a004 · Cited by 105
A self-assembled, redox-responsive receptor for the selective extraction of LiCl from water
Piotrowski, H., & Severin, K. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.062663899 · Cited by 96
The infrared spectra of coordinated perchlorates
Lewis, D. L., ESTES, E. D., & Hodgson, D. J. (1975) · Journal of Chemical Crystallography · doi:10.1007/bf01202553 · Cited by 95
Differential Sensing of Zn(II) and Cu(II) via Two Independent Mechanisms
Basa, P. N., & Sykes, A. G. (2012) · The Journal of Organic Chemistry · doi:10.1021/jo301193n · Cited by 93
pH-Independent Fluorescent Chemosensor for Highly Selective Lithium Ion Sensing
Citterio, D., Takeda, J., Kosugi, M., Hisamoto, H., Sasaki, S.-I., Komatsu, H., & Suzuki, K. A. O. (2006) · Analytical Chemistry · doi:10.1021/ac061674g · Cited by 90
Chatterjee, S., & Paital, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704726 · Cited by 89
Self-citationSelective Complexation of Li+ in Water at Neutral pH Using a Self-Assembled Ionophore
Grote, Z., Lehaire, M.-L., Scopelliti, R., & Severin, K. (2003) · Journal of the American Chemical Society · doi:10.1021/ja036621k · Cited by 82
Lü, F., Gao, X., Wu, A., Sun, N., Shi, L., & Zheng, L. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06242 · Cited by 81
Ali, M., Ahmed, I., Ramirez, P., Nasir, S., Mafe, S., Niemeyer, C. M., & Ensinger, W. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b00902 · Cited by 78
Hong, H.-J., Park, I., Ryu, J., Ryu, T., Kim, B., & Chung, K. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.023 · Cited by 77
Highly Efficient Separation of Lithium Chloride from Seawater
Tsuchiya, S., Nakatani, Y., Ibrahim, R., & Ogawa, S. (2002) · Journal of the American Chemical Society · doi:10.1021/ja003472m · Cited by 72
Luo, Y., Marets, N., & Kato, T. (2018) · Chemical Science · doi:10.1039/c7sc03652c · Cited by 44
Paquette, L. A., & Tae, J. (2001) · Journal of the American Chemical Society · doi:10.1021/ja010103x · Cited by 43
Recognition and Extraction of Sodium Chloride by a Squaramide-Based Ion Pair Receptor
Jagleniec, D., Siennicka, S., Dobrzycki, L. M., Karbarz, M., & Romański, J. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02163 · Cited by 41
Debroye, E., Eliseeva, S. V., Laurent, S., Elst, L. V., Pètoud, S., Müller, R. N., & Parac‐Vogt, T. N. (2013) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201300196 · Cited by 38
Macrocyclic Binucleating β-Diketiminate Ligands and Their Lithium, Aluminum, and Zinc Complexes
Vela, J., Zhu, L., Flaschenriem, C. J., Brennessel, W. W., Lachicotte, R. J., & Holland, P. L. (2007) · Organometallics · doi:10.1021/om0700258 · Cited by 34
An Aza‐12‐crown‐4 Ether‐Substituted Naphthalene Diimide Chemosensor for the Detection of Lithium Ion
Hangarge, R. V., La, D. D., Boguslavsky, M., Jones, L. A., Kim, Y. S., & Bhosale, S. V. (2017) · ChemistrySelect · doi:10.1002/slct.201702085 · Cited by 29
Gavette, J. V., Lara, J., Reling, L. L., Haley, M. M., & Johnson, D. W. (2013) · Chemical Science · doi:10.1039/c2sc21501b · Cited by 28
Chatterjee, S., Gohil, H., & Paital, A. R. (2017) · ChemistrySelect · doi:10.1002/slct.201700813 · Cited by 27
Self-citationA Belted Monofacial Ionophore Featuring High Selectivity for Lithium Ion Complexation
Paquette, L. A., Tae, J., Hickey, E. R., & Rogers, R. D. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19990517)38:10<1409::aid-anie1409>3.0.co;2-u · Cited by 25
Structural classification of metal complexes with three-coordinate centres
Davis, T. L., Watts, J., Brown, K. J., Hewage, J. S., Treleven, A. R., Lindeman, S. V., & Gardinier, J. R. (2015) · Dalton Transactions · doi:10.1039/c5dt02773j · Cited by 24
Pöppler, A., Granitzka, M., Herbst‐Irmer, R., Chen, Y., Iversen, B. B., John, M., Mata, R. A., & Stalke, D. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406320 · Cited by 22
Aulsebrook, M. L., Starck, M., Grace, M., Graham, B., Thordarson, P., Pál, R., & Tuck, K. L. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02731 · Cited by 21
Kang, Y. R., Lee, K. M., Nam, H., Cha, G. S., Jung, S. O., & Kim, J. S. (1997) · The Analyst · doi:10.1039/a704190j · Cited by 18
Ericksen, G. E., Vine, J. D., & A., R. B. (1978) · Elsevier eBooks · doi:10.1016/b978-0-08-022733-7.50020-4 · Cited by 16
García‐Romero, Á., Plajer, A. J., Álvarez‐Miguel, L., Bond, A. D., Wright, D. S., & García‐Rodríguez, R. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201803342 · Cited by 15
Chatterjee, S., Gohil, H., Suresh, E., & Paital, A. R. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201501679 · Cited by 13
Self-citationKatsuta, S., Imoto, T., Kudo, Y., & Takeda, Y. (2008) · Analytical Sciences · doi:10.2116/analsci.24.1215 · Cited by 11
Takano, K., Furuhama, A., Ogawa, S., & Tsuchiya, S. (1999) · Journal of the Chemical Society Perkin Transactions 2 · doi:10.1039/a808388f · Cited by 11
Sarauli, D., Popova, V., Zahl, A., Puchta, R., & Ivanović‐Burmazović, I. (2007) · Inorganic Chemistry · doi:10.1021/ic7005056 · Cited by 10
Das, K., Konar, S., Pal, P., Jana, A., Chatterjee, S., & Mukhopadhyay, S. (2014) · Polyhedron · doi:10.1016/j.poly.2014.08.043 · Cited by 6
Self-citationStoikov, I. I., Рустамович, С. Р., & Mostovaya, O. A. (2014) · Russian Journal of Organic Chemistry · doi:10.1134/s107042801404023x · Cited by 5
Research works printed but not linked: 2
- 10.1021/acs.est.5b00032 · DOI · Paper page
- 10.1021/ja003472m · DOI · Paper page
Cited by
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
The recovery and separation of lithium by using solvent extraction methods
Kanagasundaram, T., Murphy, O., Haji, M. N., & Wilson, J. J. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215727 · Cited by 263
Electrochemical lithium extraction from aqueous sources
Xiong, Y., Zhou, J., Lu, P., Yin, J., Wang, Y., & Fan, Z. (2022) · Matter · doi:10.1016/j.matt.2022.04.034 · Cited by 169
Jiang, D., Xu, R., Bai, L., Wu, W., Luo, D., Li, Z., Asahi, T., Mai, Y., Liu, Z., Yamauchi, Y., et al. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215923 · Cited by 85
Bai, X., Dai, J., Ma, Y., Bian, W., & Pan, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122386 · Cited by 84
Metadata
- Authors
- Gohil, H., Chatterjee, S., Yadav, S., Suresh, E., & Paital, A. R.
- Affiliations
- Central Salt and Marine Chemicals Research Institute (IN)
- Corresponding author
- Paital, Alok Ranjan
- Venue
- Inorganic Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-15
- Volume
- 58
- Issue
- 11
- Pages
- 7209-7219
- ISSN
- 0020-1669 (ISSN-L)
- 1520-510X
- OpenAlex
- W2945292135
- Cited by
- 39
- References
- 49
- Citations by year
- 2026: 4 · 2025: 8 · 2024: 10 · 2023: 7 · 2022: 1 · 2021: 6 · 2020: 1 · 2019: 2
- FWCI
- 0.98
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Inorganic Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Council of Scientific and Industrial Research (158/2018)
- Department of Science and Technology, Ministry of Science and Technology (EMR/2016/002135, SB/S1/IC-12/2013)
- Topics
- Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemistry › Spectroscopy › Molecular Sensors and Ion Detection
- Keywords
- selective lithium extraction, geothermal brine, solid-liquid extraction, liquid-liquid extraction, lithium perchlorate, lithium chloride
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.