The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Adsorption and Desorption of Amoxicillin Antibiotic from Water Matrices Using an Effective and Recyclable MIL-53(Al) Metal–Organic Framework Adsorbent
Abstract
Antibiotic contaminants in water and wastewater can cause serious damage to the environment and human health. Hence, their effective removal from water matrices is crucial. Effective removal of antibiotics using the adsorption process is a promising technique thanks to its easy regeneration, low cost, and high efficiency. In this work, the adsorption of amoxicillin (AMX) was investigated on a synthesized flexible metal–organic framework MIL-53(Al). The MIL-53(Al) adsorbent with a high surface area was synthesized using the hydrothermal method. It was then characterized by N 2 adsorption–desorption, FE-SEM, TEM, XRD, FT-IR, EDS, and TG analyses. The batch adsorption experiments were performed to examine the effects of solution pH, ionic strength, contact time, adsorbent dosage, and initial AMX concentration. Furthermore, the adsorption mechanism and adsorption kinetics as well as isotherms were studied experimentally. The adsorption kinetics indicated that the adsorption process was more compatible with the pseudo-second-order kinetic model. The equilibrium adsorption data were well fitted using the Langmuir model. The MIL-53(Al) exhibited an excellent saturated adsorption capacity of 758.5 mg g –1 at 303 K and pH = 7.5 ± 0.1, surpassing all previous reported MOF-based adsorbents. The adsorption process was spontaneous and exothermic, although the entropy value decreased during the adsorption process. Furthermore, the MIL-53(Al) adsorbent had a good regeneration and reusability such that the adsorption capacity diminished slightly after reuse for four cycles. These results revealed that MIL-53(Al) would be a promising adsorbent for the adsorption of AMX from water matrices for environmental protection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Petrie, B., Barden, R., & Kasprzyk-Hordern, B. (2015) · Water Research · doi:10.1016/j.watres.2014.08.053 · Cited by 2,614
Cited by
Baskar, A. V., Bolan, N., Hoang, S. A., Sooriyakumar, P., Kumar, M., Singh, L., Jasemizad, T., Padhye, L. P., Singh, G., Vinu, A., et al. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153555 · Cited by 615
Mangla, D., Annu, Sharma, A., & Ikram, S. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127946 · Cited by 437
Methods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Metadata
- Authors
- Imanipoor, J., Mohammadi, M., Dinari, M., & Ehsani, M. R.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-12
- Volume
- 66
- Issue
- 1
- Pages
- 389-403
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W3106009966
- Cited by
- 178
- References
- 2
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption and Desorption of Amoxicillin Antibiotic from Water Matrices Using an Effective and Recyclable MIL-53(Al) Metal–Organic Framework Adsorbent. https://app.cochat.ai/papers/10.1021/acs.jced.0c00736
- The paper
- Imanipoor, J., Mohammadi, M., Dinari, M., & Ehsani, M. R. (2021). Adsorption and Desorption of Amoxicillin Antibiotic from Water Matrices Using an Effective and Recyclable MIL-53(Al) Metal–Organic Framework Adsorbent. Journal of Chemical & Engineering Data. https://doi.org/10.1021/acs.jced.0c00736
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.