The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Systematic Analysis of the Nitrogen Adsorption–Desorption Isotherms Recorded for a Series of Materials Based on Microporous–Mesoporous Amorphous Aluminosilicates Using Classical Methods
Abstract
Amorphous aluminosilicates are applied in adsorption and catalysis because they can be designed to possess micro-, meso-, and macropores. In this work, we analyze the nitrogen physisorption isotherms recorded for a series of materials based on amorphous aluminosilicates synthesized by sol–gel via hydrolysis in acidic medium (ACSG), sol–gel with a poly(ethylene glycol) template (P), and sol–gel with gel skeletal reinforcement (GRS). We found that the porosity of the ACGS and GRS types of materials was dominated by mesopores, while that of the P-type materials was dominated by micropores but with a non-negligible fraction of mesopores. We catalogued the isotherms produced by the latter type of materials as type IV(c) as a supplement to the current IUPAC classification. In addition, we found that the hysteresis loops shown by the amorphous aluminosilicates of the ACGS-type materials present inflection points not found in the current IUPAC classes; therefore, we propose classifying them as H3(b) types. We also assessed the surface area and porosity of the materials by classical methods, namely, the Brunauer–Emmett–Teller (BET) surface area, t -plot microporosity, Barrett–Joyner–Halenda (BJH) mesopore size distribution, and fractal dimension. First, we found a semiexponential correlation between the C BET constant of the materials and their relative fraction of the microporous surface area. Second, we found that under the conditions used herein, the impregnation of a NiMo phase over the synthesized amorphous aluminosilicates increased the C BET constant and reduced the fractal dimension of the materials. These changes were thus correlated to the changes observed in the relative microporosity and mesoporous size distributions of the materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Groen, J. C., Peffer, L. A. A., & Pérez-Ramı́rez, J. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00339-1 · Cited by 2,131
Surface area and pore texture of catalysts
Leofanti, G., Padovan, M., Tozzola, G., & Venturelli, B. (1998) · Catalysis Today · doi:10.1016/s0920-5861(98)00050-9 · Cited by 1,883
Physical Adsorption on Non-Uniform Surfaces
Halsey, G. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746689 · Cited by 1,472
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Physical Adsorption Characterization of Nanoporous Materials
Thommes, M. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.201000064 · Cited by 1,394
Physisorption Hysteresis Loops and the Characterization of Nanoporous Materials
Sing, K. S. W., & Williams, R. T. (2004) · Adsorption Science & Technology · doi:10.1260/0263617053499032 · Cited by 1,266
Density functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
(2002) · Wiley eBooks · doi:10.1002/9783527618286 · Cited by 1,207
Bardestani, R., Patience, G. S., & Kaliaguine, S. (2019) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23632 · Cited by 1,160
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
Mesoporous metal–organic framework materials
Xuan, W., Zhu, C., Liu, Y., & Cui, Y. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15196g · Cited by 933
The use of nitrogen adsorption for the characterisation of porous materials
Sing, K. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00612-4 · Cited by 923
Physical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Determination of pore size and pore size distribution
Kaneko, K. (1994) · Journal of Membrane Science · doi:10.1016/0376-7388(94)00126-x · Cited by 715
Classification of Gibbs adsorption isotherms
Donohue, M. D., & Aranovich, G. L. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00044-x · Cited by 700
Characterization of micro- and mesoporous solids by physisorption methods and pore-size analysis
Storck, S., Bretinger, H., & Maier, W. F. (1998) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00164-1 · Cited by 602
Zeolite Catalysts with Tunable Hierarchy Factor by Pore‐Growth Moderators
Pérez‐Ramírez, J., Verboekend, D., Bonilla, A., & Abelló, S. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901394 · Cited by 530
Curvature and parametric sensitivity in models for adsorption in micropores
Saito, A., & Foley, H. C. (1991) · AIChE Journal · doi:10.1002/aic.690370312 · Cited by 512
Construction of hierarchically porous metal–organic frameworks through linker labilization
Yuan, S., Zou, L., Qin, J.-S., Li, J., Huang, L., Feng, L., Wang, X., Bosch, M., Alsalme, A., Cagin, T., et al. (2017) · Nature Communications · doi:10.1038/ncomms15356 · Cited by 467
Adsorption isotherms of microporous-mesoporous solids revisited
Schneider, P. (1995) · Applied Catalysis A: General · doi:10.1016/0926-860x(95)00110-7 · Cited by 466
Adsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Monson, P. A. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.04.043 · Cited by 401
(2009) · Wiley eBooks · doi:10.1002/9783527626854 · Cited by 388
Hydrocracking of Vacuum Gasoil on the Novel Mesoporous MCM-41 Aluminosilicate Catalyst
Corma, A., Martinez, A., Martinezsoria, V., & Monton, J. B. (1995) · Journal of Catalysis · doi:10.1006/jcat.1995.1104 · Cited by 382
Adsorption methods for the characterization of porous materials
Sing, K. S. W. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00038-4 · Cited by 367
Fundamentals in the preparation of heterogeneous catalysts
Campanati, M., Fornasari, G., & Vaccari, A. (2003) · Catalysis Today · doi:10.1016/s0920-5861(02)00375-9 · Cited by 344
Grosman, A., & Ortega, C. (2008) · Langmuir · doi:10.1021/la703978v · Cited by 212
Harkins, W. D., & Jura, G. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723871 · Cited by 200
Coke location in microporous and hierarchical ZSM-5 and the impact on the MTH reaction
Schmidt, F., Hoffmann, C., Giordanino, F., Bordiga, S., Simon, P., Carrillo-Cabrera, W., & Kaskel, S. (2013) · Journal of Catalysis · doi:10.1016/j.jcat.2013.07.020 · Cited by 182
Ali, M. A., Tatsumi, T., & Masuda, T. (2002) · Applied Catalysis A: General · doi:10.1016/s0926-860x(02)00121-7 · Cited by 181
Hierarchically‐Ordered Zeolites: A Critical Assessment
Hartmann, M., Thommes, M., & Schwieger, W. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202001841 · Cited by 143
Silica-alumina catalytic materials: A critical review
Busca, G. (2019) · Catalysis Today · doi:10.1016/j.cattod.2019.05.011 · Cited by 104
Parola, V. L., Deganello, G., Sciré, S., et al. (2003) · Journal of Solid State Chemistry · doi:10.1016/s0022-4596(03)00321-9 · Cited by 74
Studies on pore systems in catalysts III. Pore-size distribution curves in aluminum oxide systems
Lippens, B. C. (1964) · Journal of Catalysis · doi:10.1016/0021-9517(64)90091-0 · Cited by 52
Poly(ethylene glycol) as structure directing agent in sol–gel synthesis of amorphous silica
Gorbunova, O. V., Baklanova, O. N., Gulyaeva, T. I., Тренихин, М. В., & Дроздов, В. А. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.013 · Cited by 32
A new plotting of the BET method
Keii, T., Takagi, T., & Kanetaka, S. (1961) · Analytical Chemistry · doi:10.1021/ac50154a063 · Cited by 27
Sandoval-Díaz, L.-E., Aragon-Quiroz, J.-A., Ruíz-Cardona, Y.-S., Domínguez-Monterroza, A., & Trujillo, C. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.08.030 · Cited by 27
Hydroprocessing of Phenanthrene Over Sulfided Fe–W Supported on Modified SBA-15
Restrepo-García, J. R., Ramírez‐Caballero, G. E., & Baldovino‐Medrano, V. G. (2017) · Catalysis Letters · doi:10.1007/s10562-017-2269-0 · Cited by 17
Self-citationBaldovino‐Medrano, V. G., Farin, B., & Gaigneaux, É. M. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.03.067 · Cited by 14
Self-citationSurfactant‐Templated Mesostructuring of Zeolites: From Discovery to Commercialization
Li, K., Beaver, M. G., Speronello, B. K., & García‐Martínez, J. (2015) · Wiley eBooks · doi:10.1002/9783527673957.ch10 · Cited by 13
Metadata
- Authors
- Baldovino-Medrano, V. G., Niño-Celis, V., & Isaacs Giraldo, R.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-09-01
- Volume
- 68
- Issue
- 9
- Pages
- 2512-2528
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W4386369391
- Cited by
- 306
- References
- 47
- FWCI
- 21.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.