The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries
Abstract
Abstract Two major strategies are currently pursued to improve the energy density of lithium-ion batteries using LiNixCoyMnzO2 (NCM) cathode materials. One is to increase the fraction of redox active Ni (≥80%), which allows larger amounts of Li to be extracted at a given cutoff voltage (Umax). The other is to increase Umax, in particular for medium-Ni content NCM materials. However, the accompanying lattice changes ultimately lead to capacity fading in both cases. Here the structural changes occurring in Li1.02NixCoyMnzO2 (with x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) during cycling operation in the voltage range between 3.0 and 4.6 V vs Li are quantified by means of operando X-ray diffraction combined with detailed Rietveld analysis. All samples show a large decrease in unit cell volume upon charging, ranging from 2.4% for NCM111 (33% Ni) to 8.0% for NCM851005 (85% Ni). To make a fair comparison of the structural stability of the different NCM materials, energy densities as a function of Umax are estimated and correlated with X-ray diffraction results. It is shown that NCMs with a lower Ni content allow for specific energies similar to that of, e.g., Ni-rich NCM811 (80% Ni) when operated at sufficiently high Umax, but still undergo less pronounced changes in structure. Nevertheless, as indicated by charge/discharge tests, the capacity retention of low- and medium-Ni content NCMs cycled to high Umax is also strongly affected by factors other than stability of the layered crystal lattice (electrolyte decomposition etc.). Overall, it is demonstrated that the complexity of the degradation processes needs to be better understood to identify optimal cycling conditions for specific cathode compositions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data
Momma, K., & Izumi, F. (2011) · Journal of Applied Crystallography · doi:10.1107/s0021889811038970 · Cited by 26,054
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Rietveld refinement of Debye–Scherrer synchrotron X-ray data from Al2O3
Thompson, P., Cox, D. E., & Hastings, J. B. (1987) · Journal of Applied Crystallography · doi:10.1107/s0021889887087090 · Cited by 2,820
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1407994 · Cited by 941
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Cited by
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
High entropy oxides for reversible energy storage
Sarkar, A., Velasco, L., Wang, D., Wang, Q., Talasila, G., de Biasi, L., Kübel, C., Brezesinski, T., Bhattacharya, S. S., Hahn, H., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05774-5 · Cited by 1,351
Self-citationKoerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Self-citationCompositionally complex doping for zero-strain zero-cobalt layered cathodes
Zhang, R., Wang, C., Zou, P., Lin, R., Ma, L., Yin, L., Li, T., Xu, W., Jia, H., Li, Q., et al. (2022) · Nature · doi:10.1038/s41586-022-05115-z · Cited by 785
Liu, D., Shadike, Z., Lin, R., Qian, K., Li, H., Li, K., Wang, S., Yu, Q., Liu, M., Ganapathy, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201806620 · Cited by 673
Metadata
- Authors
- de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-15
- Volume
- 121
- Issue
- 47
- Pages
- 26163-26171
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2765492030
- Cited by
- 374
- References
- 31
- FWCI
- 9.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries. https://app.cochat.ai/papers/10.1021/acs.jpcc.7b06363
- The paper
- de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017). Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries. The Journal of Physical Chemistry C. https://doi.org/10.1021/acs.jpcc.7b06363
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.