Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe–N–C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells
Open accessThe DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
We present an investigation of the microstructure and rheological behavior of catalyst inks consisting of Fe–N–C platinum group metal-free catalysts and a perfluorosulfonic acid ionomer in a dispersion medium (DM) of water and 1-propanol ( n PA). The effects of the ionomer-to-catalyst (I/C) ratio and weight percentage of water (H 2 O %) in the DM on the ink microstructure were studied. Steady-shear and dynamic-oscillatory-shear rheology, in combination with synchrotron X-ray scattering, was utilized to understand interparticle interactions and the level of agglomeration of the inks. In the absence of the ionomer, the inks were significantly agglomerated, approaching a gel-like microstructure for catalyst concentrations as low as 2 wt %. The effect of H 2 O % in the DM on particle agglomeration was found to vary with particle concentration. In concentrated inks (≥2 wt % catalyst), increasing H 2 O % was found to increase agglomeration because of the hydrophobic nature of the catalysts. In dilute inks (<1 wt % catalyst), the trend was reversed with increasing H 2 O %, suggesting that electrostatic interactions are dominating the behavior. In inks with 5 wt % catalyst, the addition of an ionomer was found to significantly stabilize the catalyst against agglomeration. Maximum stability was observed at 0.35 I/C for all DM H 2 O % studied. At high ionomer concentrations (I/C > 0.35), interesting differences were observed between n PA-rich inks (H 2 O % ≤ 50%) and H 2 O-rich (82% H 2 O) inks. The n PA-rich inks remained predominantly stable—ink viscosity only weakly increased with I/C and the Newtonian behavior was maintained for I/C up to 0.9. In contrast, the H 2 O-rich inks exhibited a significant increase in viscoelasticity with increasing I/C, suggesting flocculation of the catalyst by the ionomer. These differences suggest that the nature of the interactions between the ionomer and catalyst is highly dependent on the H 2 O % in the DM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, X. X., Swihart, M. T., & Wu, G. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0304-9 · Cited by 1,174
Rambo, R. P., & Tainer, J. A. (2011) · Biopolymers · doi:10.1002/bip.21638 · Cited by 533
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Banham, D., Kishimoto, T., Zhou, Y., Sato, T., Bai, K., Ozaki, J.-I., Imashiro, Y., & Ye, S. (2018) · Science Advances · doi:10.1126/sciadv.aar7180 · Cited by 267
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
Self-citationRheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Self-citationVan Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17614 · Cited by 148
Self-citationShukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Inherent Acidity of Perfluorosulfonic Acid Ionomer Dispersions and Implications for Ink Aggregation
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b06493 · Cited by 122
Cited by
Gong, Q., Li, C., Liu, Y., Ilavsky, J., Guo, F., Cheng, X., & Xie, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06711 · Cited by 72
Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Ren, H., Meng, X., Lin, Y., & Shao, Z. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230698 · Cited by 53
Influence of Ionomer Content in the Catalytic Layer of MEAs Based on Aquivion® Ionomer
Gatto, I., Saccà, A., Sebastián, D., Baglio, V., Aricò, A. S., Oldani, C., Merlo, L., & Carbone, A. (2021) · Polymers · doi:10.3390/polym13213832 · Cited by 19
Metadata
- Authors
- Khandavalli, S., Iyer, R., Park, J. H., Myers, D. J., Neyerlin, K. C., Ulsh, M., & Mauger, S. A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-24
- Volume
- 36
- Issue
- 41
- Pages
- 12247-12260
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W3089253820
- Cited by
- 56
- References
- 15
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe–N–C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells. https://app.cochat.ai/papers/10.1021/acs.langmuir.0c02015
- The paper
- Khandavalli, S., Iyer, R., Park, J. H., Myers, D. J., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2020). Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe–N–C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells. Langmuir. https://doi.org/10.1021/acs.langmuir.0c02015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.