The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Abstract
We present a rheological investigation of fuel cell catalyst inks. The effects of ink parameters, which include carbon black-support structure, Pt presence on carbon support (Pt-carbon), and ionomer (Nafion) concentration, on the ink microstructure of catalyst inks were studied using rheometry in combination with ultrasmall-angle X-ray scattering (USAXS) and dynamic light scattering (DLS). Dispersions of a high-surface-area carbon (HSC), or Ketjen black type, demonstrated a higher viscosity than Vulcan XC-72 carbon due to both a higher internal porosity and a more agglomerated structure that increased the effective particle volume fraction of the inks. The presence of Pt catalyst on both the carbon supports reduced the viscosity through electrostatic stabilization. For carbon-only dispersions (without Pt), the addition of ionomer up to a critical concentration decreased the viscosity due to electrosteric stabilization of carbon agglomerates. However, with Pt-carbon dispersions, the addition of ionomer showed contrasting behavior between Vulcan and HSC supports. In the Pt-Vulcan dispersions, the effect of ionomer addition on the rheology was qualitatively similar to Vulcan dispersions without Pt. The Pt-HSC dispersions showed an increased viscosity with ionomer addition and a strong shear-thinning nature, indicating that Nafion likely flocculated the Pt-HSC aggregates. These results were verified using DLS and USAXS. Further, the observations of the effect of ionomer:carbon ratio and a comparison between carbons of different surface areas provided insights on the microstructure of the catalyst ink corresponding to the optimized I/ C ratio for fuel cell performance reported in the literature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“When simultaneously dispersing Pt/HSC and Nafion ionomer in the solvent, i.e., the catalyst ink, it presents a shear-thinning nature [53] (Figure 5).”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [53]
In the citing paper
“The viscosity of catalyst ink is generally determined by temperature, the viscosity of solvent, the volume fraction of solids in the ink, and shear rate [53].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [53]
In the citing paper
“When dispersing Pt/HSC (high surface carbon) in the solvent, the fluid exhibits a shear-thinning behavior.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [53]
In the citing paper
“When dispersing Nafion ionomer in the solvent with a weight ratio from 0.25 to 5.5 wt.%, the dispersion solution still approaches a Newtonian behavior for shear rates above 10 s -1 [52,53].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [53]
In the citing paper
“only a few cases exhibit a nearly Newtonian behavior for shear rate of about 1~1000 s -1 [53,75].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [53]
14 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
DLS and zeta potential – What they are and what they are not?
Bhattacharjee, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.017 · Cited by 4,702
The Structure and Rheology of Complex Fluids
Larson, R. G. (1998) · Cited by 3,188
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
Small-Angle Scattering from Polymeric Mass Fractals of Arbitrary Mass-Fractal Dimension
Beaucage, G. (1996) · Journal of Applied Crystallography · doi:10.1107/s0021889895011605 · Cited by 1,059
Shear thickening in colloidal dispersions
Wagner, N. J., & Brady, J. F. (2009) · Physics Today · doi:10.1063/1.3248476 · Cited by 994
Long, C. M., Nascarella, M. A., & Valberg, P. A. (2013) · Environmental Pollution · doi:10.1016/j.envpol.2013.06.009 · Cited by 558
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
(1997) · Springer eBooks · doi:10.1007/978-94-011-5342-3 · Cited by 442
High-concentration zeta potential measurements using light-scattering techniques
Kaszuba, M., Corbett, J., Watson, F. M., & Jones, A. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0175 · Cited by 430
Research works printed but not linked: 2
- 10.1016/s0001-8686(96)90047-0 · doi:10.1016/s0001-8686(96)90047-0 · Paper page
- Derjaguin B., 1941, Acta Physicochem. URSS, 14, 633
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“Moreover, a high-surface-area carbon support demonstrates a higher ink viscosity due to both a higher internal porosity and a more agglomerated structure that increases the effective particle volume fraction [176].”
Suter, T. A. M., Smith, K., Hack, J., Rasha, L., Rana, Z., Angel, G. M. A., Shearing, P. R., Miller, T. S., & Brett, D. J. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101025 · Cited by 245
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
Kabir, S., Myers, D. J., Kariuki, N. N., Park, J.-H., Wang, G., Baker, A. M., Macauley, N., Mukundan, R., More, K. L., & Neyerlin, K. C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11365 · Cited by 161
Self-citation
Metadata
- Authors
- Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A.
- Affiliations
- National Laboratory of the Rockies (US)
- Argonne National Laboratory (US)
- Corresponding author
- Mauger, Scott A.
- ORCID
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-10
- Volume
- 10
- Issue
- 50
- Pages
- 43610-43622
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2903943595
- Cited by
- 153
- References
- 65
- Citations by year
- 2026: 20 · 2025: 21 · 2024: 21 · 2023: 26 · 2022: 16 · 2021: 28 · 2020: 13 · 2019: 8
- FWCI
- 4.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Keywords
- rheology, carbon black support, Nafion ionomer, ionomer-to-carbon ratio, high surface area carbon, Ketjen Black, Vulcan XC-72, viscosity, shear thinning, electrostatic stabilization, electrosteric stabilization, particle agglomeration, flocculation, dynamic light scattering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks. https://app.cochat.ai/papers/10.1021/acsami.8b15039
- The paper
- Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018). Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.8b15039
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.