The DOI matches its Crossref record; 64 of the 65 references it cites were found in a registry or an index; 2 of the 17 sources its claims cite were checked for support.
Enhanced Water Splitting Electrocatalysis with Heterointerfacial Cobalt Phosphide In Situ Supported on a Cellulose-Derived Carbon Aerogel
Abstract
The active site density, intrinsic activity, and supporting substrate of cobalt phosphide catalysts are vital to their performance in alkaline water electrolysis. In this work, a CoP/Co 2 P loaded on cellulose nanofiber-derived carbon aerogels (CP/CCAs) bifunctional electrocatalyst with a three-dimensional network and heterostructure is illustrated through sequential facile hydrothermal, freeze-drying, and phosphorylation processes. The three-dimensional network of carbon aerogels derived from cellulose nanofibers reveals a specific surface area of 183.41 m 2 /g, greatly enriching the active sites and facilitating the electron and mass transportation. Besides, interactions between CoP/Co 2 P with a heterogeneous structure and carbon aerogels modulate the electronic structure to enhance the intrinsic activity of the catalysts. Benefiting from these advantages, CP/CCAs-2 demonstrates a superior oxygen evolution reaction activity (η10 mA cm –2 = 277 mV) over the benchmark RuO 2 and a moderate hydrogen evolution reaction performance (η10 mA cm –2 = 63 mV). Density functional theory calculations further reveal that the coupling of CoP/Co 2 P and cellulose-derived carbon aerogels promotes the water adsorption and activates the H–O bond. As a result, the alkaline electrolyzer assembled with CP/CCAs-2 both as a cathode and an anode shows a low cell voltage of 1.59 V at a current density of 10 mA cm –2 and good stability. This work provides a strategy for phosphide electrocatalysts composited with green carbon carriers for overall water splitting.
Overview
CoChat Summary
TL;DR
The authors synthesize a bifunctional CoP/Co₂P heterostructure anchored in situ on cellulose-nanofiber-derived carbon aerogels (CP/CCAs) via hydrothermal, freeze-drying, and phosphorylation steps, and show it catalyzes both OER and HER in alkaline media. The optimized CP/CCAs-2 outperforms commercial RuO₂ for OER and drives overall water splitting at 1.59 V at 10 mA cm⁻².
Key findings
- CP/CCAs-2 requires overpotentials of 277 mV (η₁₀) and 415 mV (η₁₀₀) for OER, beating commercial RuO₂ (297 and 477 mV), neat CP (338 and 462 mV), and CCAs (η₁₀ = 689 mV); its OER Tafel slope is 49 mV dec⁻¹ versus 108 for RuO₂.
- For HER, CP/CCAs-2 needs 63 mV (η₁₀) and 174 mV (η₁₀₀), better than neat CP (89 and 290 mV), CP/CCAs-1 (185 and 392 mV), and CP/CCAs-3 (159 and 335 mV), though Pt/C is superior (36 and 97 mV); HER Tafel slope is 77 mV dec⁻¹ (Volmer–Heyrovsky).
- The cellulose-derived carbon aerogel has a specific surface area of 183.41 m²/g for CP/CCAs-2 (305.23 and 145.02 m²/g for CP/CCAs-1 and -3), and CP/CCAs-2 shows the largest double-layer capacitance (34.87 mF cm⁻²) and smallest OER charge-transfer resistance (1.4 Ω).
- A two-electrode alkaline electrolyzer using CP/CCAs-2 as both anode and cathode reaches 10 mA cm⁻² at 1.59 V (vs 1.63 V for RuO₂||Pt/C) and remains stable over 30 h, while the RuO₂||Pt/C cell degrades in under 10 h.
- DFT shows H₂O adsorption energy of −0.720 eV on CoP–Co₂P-graphite carbon versus −0.601 eV on CoP–Co₂P and −0.136 eV on graphite, with O–H bond lengthening to 0.986/0.977 Å (from 0.96 Å in free water), indicating enhanced water adsorption and H–O activation.
Methods
- Synthesis: Co(NO₃)₂·6H₂O, urea, and NH₄F were added to a 1.2 wt % cellulose nanofiber suspension, hydrothermally treated at 120 °C for 6 h, freeze-dried at −54 °C for 48 h, carbonized at 600 °C under N₂, then vapor-phase phosphidized with NaH₂PO₂ at 300 °C for 2 h. Three Co loadings (0.24, 0.48, 0.72 g cobalt nitrate) gave CP/CCAs-1, -2, and -3; CCAs and neat CP controls were also prepared.
- Characterization: XRD, Raman, SEM/TEM/HRTEM, elemental mapping, XPS, and N₂ adsorption–desorption (BET/BJH).
- Electrochemistry: three-electrode tests in 1 M KOH (Pt foil counter, Hg/HgO reference, potentials converted to RHE), with LSV, Tafel analysis, EIS (100 kHz–0.01 Hz), Cdl from CV at 20–100 mV s⁻¹, chronoamperometry stability, and in situ Raman during OER; DFT calculations used VASP with PBE and PAW (600 eV cutoff).
Limitations
- The paper states no explicit limitations; the text notes only that the neat CP required a higher phosphidation temperature (500 °C) than CP/CCAs because powder-form cobalt phosphorylates incompletely, and that particle size increased slightly after the chronoamperometry test.
- Evident from the text: HER performance (η₁₀ = 63 mV) remains well behind commercial Pt/C (36 mV), so the catalyst is not a full replacement for the noble-metal HER benchmark; the abstract's HER value (63 mV) differs from the introduction's stated 89 mV, which is the neat CP value, an internal inconsistency.
- Stability testing was limited to 30 h at 10 mA cm⁻², and no industrial-level current densities or long-term (>30 h) durability data are reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 2 Not valid · 5 Not checked · 24 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“increasing the active site density has been proven to be an effective strategy to increase the activity of the catalyzer, which can be achieved by constructing the microstructure of the carbon substrate.37−41”
What the sources say
- Not checked — no full text of the sourcecites [37] source
- Not checked — no full text of the sourcecites [38] source
- Supportedcites [39] source
The Results and Discussion states that single-atom mass loading is positively correlated with oxygen-reduction performance and that porous carbon structures make more active sites accessible for efficient electrocatalysis. These passages support the cited claim that increasing available active sites is an effective way to improve catalyst activity; our copy provides no page numbers. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [40] source
- Partly supportedcites [41] sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) says chloride adsorption creates more OER-active Ni sites and improves the NiFe LDH catalyst’s activity, supporting the link between more active sites and higher activity in this system. It does not establish increased active-site density as a general strategy or discuss achieving it by constructing a carbon substrate’s microstructure. (LLM, conf=0.82)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At a fixed current density of −10 mA cm−2, the overpotential was stable after 30 h of continuous testing (Figure S19), which indicates that CP/CCAs-2 has good stability to HER.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Compared to the CCAs, the ID/IG of CP/CCAs-2 is 0.996, indicating that disordered or defective carbon was formed in the CNF carbon skeleton, possibly caused by the in situ growth of cobalt phosphide species and complexation with a carbon substrate.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The well-resolved interface between CoP and Co2P demonstrates the formation of a CoP−Co2P heterostructure.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The elemental mapping images (Figure 2g) manifest that the C, Co, and P elements uniformly distribute throughout the cellulose nanofiber, corroborating the existence of abundant Co and P elements in the carbon substrate.”
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
13 more claims
Create a free account to see all 32 claims and every source verdict.
- It may state two separate claims as one. 12
- The quote only partly states this claim. 1
- Probably not a substantial claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“showing a low voltage of 1.57 V to drive 10 mA cm−2.”
“the required cell voltage of CP/CCAs- 2||CP/CCAs-2 is merely 1.59 V to achieve a current density of 10 mA cm−2”
Citations
Cites
Yu, Z., Duan, Y., Feng, X., Yu, X., Gao, M., & Yu, S. (2021) · Advanced Materials · doi:10.1002/adma.202007100 · Cited by 1,947
Shi, Y., Ma, Z.-R., Xiao, Y.-Y., Yin, Y.-C., Huang, W.-M., Huang, Z.-C., Zheng, Y.-Z., Mu, F.-Y., Huang, R., Shi, G.-Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23306-6 · Cited by 894
Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction
Li, L., Wang, P., Shao, Q., & Huang, X. (2021) · Advanced Materials · doi:10.1002/adma.202004243 · Cited by 672
Pu, Z., Liu, T., Amiinu, I. S., Cheng, R., Wang, P., Zhang, C., Ji, P., Hu, W., Liu, J., & Mu, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004009 · Cited by 604
Diao, J., Qiu, Y., Liu, S., Wang, W., Chen, K., Li, H., Yuan, W., Qu, Y., & Guo, X. (2020) · Advanced Materials · doi:10.1002/adma.201905679 · Cited by 555
Zhang, R., Pan, L., Guo, B., Huang, Z.-F., Chen, Z., Wang, L., Zhang, X., Guo, Z., Xu, W., Loh, K. P., et al. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.2c10515 · Cited by 544
Self-citationMachine learning for a sustainable energy future
Yao, Z., Lum, Y., Johnston, A., Mejia-Mendoza, L. M., Zhou, X., Wen, Y., Aspuru-Guzik, A., Sargent, E. H., & Seh, Z. W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00490-5 · Cited by 517
Advanced Platinum-Based Oxygen Reduction Electrocatalysts for Fuel Cells
Huang, L., Zaman, S., Tian, X., Wang, Z., Fang, W., & Xia, B. Y. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00488 · Cited by 515
CoP Nanoframes as Bifunctional Electrocatalysts for Efficient Overall Water Splitting
Ji, L., Wang, J., Teng, X., Meyer, T. J., & Chen, Z. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b03623 · Cited by 496
Local Charge Distribution Engineered by Schottky Heterojunctions toward Urea Electrolysis
Li, C., Liu, Y., Zhuo, Z., Ju, H., Li, D., Guo, Y., Wu, X., Li, H., & Zhai, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801775 · Cited by 418
Chen, D., Zhu, J., Mu, X., Cheng, R., Li, W., Liu, S., Pu, Z., Lin, C., & Mu, S. (2020) · Applied Catalysis B: Environment and Energy · doi:10.1016/j.apcatb.2020.118729 · Cited by 387
Mishra, I. K., Zhou, H., Sun, J., Qin, F., Dahal, K., Bao, J., Chen, S., & Ren, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01270a · Cited by 349
Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly
Qin, H., Zhang, Y., Jiang, J., Wang, L., Song, M., Bi, R., Zhu, P., & Jiang, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106269 · Cited by 340
Advances in engineering RuO2 electrocatalysts towards oxygen evolution reaction
Wang, C., Jin, L., Shang, H., Xu, H., Shiraishi, Y., & Du, Y. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.11.051 · Cited by 328
Li, X., Wang, Y., Wang, J., Da, Y., Zhang, J., Li, L., Zhong, C., Deng, Y., Han, X., & Hu, W. (2020) · Advanced Materials · doi:10.1002/adma.202003414 · Cited by 312
Cao, Y., Wang, T., Li, X., Zhang, L., Luo, Y., Zhang, F., Asiri, A. M., Hu, J., Liu, Q., & Sun, X. (2021) · Inorganic Chemistry Frontiers · doi:10.1039/d1qi00124h · Cited by 308
Liu, H., Shen, W., Jin, H., Xu, J., Xi, P., Dong, J., Zheng, Y., & Qiao, S. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202311674 · Cited by 298
Li, M., Wang, X., Liu, K., Zhu, Z., Guo, H., Li, M., Du, H., Sun, D., Li, H., Huang, K., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301162 · Cited by 294
Huang, X., Xu, X., Luan, X., & Cheng, D. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104332 · Cited by 283
Hao, Y., Yu, D., Zhu, S., Kuo, C.-H., Chang, Y.-M., Wang, L., Chen, H.-Y., Shao, M., & Peng, S. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03936b · Cited by 237
Ramakrishnan, S., Velusamy, D. B., Sengodan, S., Nagaraju, G., Kim, D. H., Kim, A. R., & Yoo, D. J. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120752 · Cited by 205
Xie, Y., Chen, X., Sun, K., Zhang, J., Lai, W., Liu, H., & Wang, G. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202301833 · Cited by 197
Self-citationYuan, G., Bai, J., Zhang, L., Chen, X., & Ren, L. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119693 · Cited by 195
Self-citationSu, H., Soldatov, M. A., Roldugin, V., & Liu, Q. (2022) · eScience · doi:10.1016/j.esci.2021.12.007 · Cited by 194
Hierarchical CoP–FeP Branched Heterostructures for Highly Efficient Electrocatalytic Water Splitting
Niu, Z., Qiu, C., Jiang, J., & Ai, L. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05089 · Cited by 183
Song, J., Chen, Y., Huang, H., Wang, J., Huang, S., Liao, Y., Fetohi, A. E., Hu, F., Chen, H., Li, L., et al. (2022) · Advanced Science · doi:10.1002/advs.202104522 · Cited by 176
Wang, L., Song, L., Yang, Z., Chang, Y., Hu, F., Li, L., Li, L., Chen, H., & Peng, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202210322 · Cited by 173
Zhang, G., Pei, J., Wang, Y., Wang, G., Wang, Y., Liu, W., Xu, J., An, P., Huang, H., Zheng, L., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202407509 · Cited by 154
Zhao, S. M., Hu, F., Yin, L., Li, L., Chang, Y.-M., Chen, H., & Peng, S. (2023) · 中国科学通报:英文版 · doi:10.1016/j.scib.2023.06.001 · Cited by 144
Li, X., Xing, W., Hu, T., Luo, K., Wang, J., & Tang, W. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214811 · Cited by 138
Yu, D., Hao, Y., Han, S., Zhao, S. M., Zhou, Q., Kuo, C., Hu, F., Li, L., Chen, H., Ren, J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c11939 · Cited by 137
Sun, H., Yao, B., Han, Y., Yang, L., Zhao, Y., Wang, S., Zhong, C., Chen, J., Li, C., & Du, M. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202303563 · Cited by 134
Self-citation(2023) · doi:10.1038/s41467-023-42292-5 · Cited by 132
Self-citationShah, K., Dai, R., Mateen, M., Hassan, Z., Zhuang, Z., Liu, C., Israr, M. Q., Cheong, W.-C. M., Hu, B., Tu, R., et al. (2021) · Angewandte Chemie · doi:10.1002/ange.202114951 · Cited by 131
Self-citationWang, J., Gao, R., Zheng, L., Chen, Z., Wu, Z., Sun, L., Hu, Z., & Liu, X. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b01023 · Cited by 122
Self-citationElectrocatalytic hydrogenation of quinolines with water over a fluorine-modified cobalt catalyst
Guo, S., Wu, Y., Wang, C., Gao, Y., Li, M., Zhang, B., & Liu, C. (2022) · Nature Communications · doi:10.1038/s41467-022-32933-6 · Cited by 120
Guo, S., Wang, J., Sun, Y., Peng, L., & Li, C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139317 · Cited by 118
Construction of Co2P/CoP@Co@NCNT rich-interface to synergistically promote overall water splitting
Lu, Z., Cao, Y., Xie, J., Hu, J., Wang, K., & Jia, D. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132877 · Cited by 108
Yang, Y., Meng, H., Kong, C., Yan, S., Ma, W., Zhu, H. Y., Ma, F., Wang, C., & Hu, Z. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.04.004 · Cited by 108
Self-citationYan, W., Qi, J., Zhao, D., Liu, J., Wei, P., Kang, X., & Li, X. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120196 · Cited by 103
Liu, X., Zhao, X., Cao, S., Xu, M., Wang, Y., Xue, W., & Li, J. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.122715 · Cited by 103
Zhang, Y., Zhang, X., Li, Y., Wang, J., Kawi, S., & Zhong, Q. (2023) · Nano Research · doi:10.1007/s12274-023-5409-4 · Cited by 86
Lei, H., Ma, L., Wan, Q., Huangfu, Z., Tan, S., Wang, Z., & Mai, W. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107941 · Cited by 84
Lv, S., Deng, Y., Liu, Q., Fu, Z., Liu, X., Wang, M., Xiao, Z., Li, B., & Wang, L. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.122403 · Cited by 80
Li, Q., Li, S., Zhao, Z., Liu, J., Ran, Y., Cui, J., Lin, W. J., Yu, X., Wang, L., Zhang, Y., et al. (2021) · Small Methods · doi:10.1002/smtd.202100125 · Cited by 77
Sun, Y., Liu, T., Li, Z., Meng, A., Li, G., Wang, L., & Li, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133684 · Cited by 70
Shen, M., Hu, W., Duan, C., Li, J., Ding, S., Zhang, L., Zhu, J., & Ni, Y. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.09.035 · Cited by 67
Advanced cellulose-based materials toward stabilizing zinc anodes
Li, Z., Chen, X., Zhang, R., Shen, T., Sun, J., Hu, Z., Li, L., Yang, L., & Yu, H. (2024) · Science China Chemistry · doi:10.1007/s11426-023-1918-0 · Cited by 52
Self-citationZhang, B., Qin, H., Diao, L., Zhao, N., Shi, C., Liu, E., & He, C. (2019) · Journal of Catalysis · doi:10.1016/j.jcat.2019.08.007 · Cited by 45
Sun, H., Li, C., Yang, L., Han, Y., Yu, X., Li, C., Zhang, Z., Yan, Z., Cheng, F., & Du, M. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2308035120 · Cited by 40
Self-citationCross, R. W., & Dzade, N. Y. (2020) · Catalysts · doi:10.3390/catal10030307 · Cited by 31
Heterogeneous Fe-Doped NiCoP–MoO3 Efficient Electrocatalysts for Overall Water Splitting
Guo, F., Li, W., Liu, Y., Chen, Q., & Zhong, Q. (2023) · Langmuir · doi:10.1021/acs.langmuir.2c02678 · Cited by 30
Ren, T., Liu, Y., Lin, X., & Li, C. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta05623f · Cited by 28
Du, K., Zhang, D., Zhang, S., & Tam, K. C. (2024) · Small · doi:10.1002/smll.202304739 · Cited by 28
Nan, Y., Liu, T., Liu, W., Cao, D., & Cheng, D. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c01132 · Cited by 22
Fan, Y., Yu, Y., Sun, D., Qu, Y., Huang, L., Wei, X., Su, Q., Du, G., Xu, B., & Wang, K. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.173354 · Cited by 21
Batugedara, T. N., & Brock, S. L. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c00041 · Cited by 17
Zhou, X., Gong, L., Wu, C., Peng, Y., Cao, B., Yang, H., Wu, D., Jiang, X., & Xia, B. Y. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.05.047 · Cited by 16
Liu, S., Feng, K., Xu, W., & Tong, J. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c00794 · Cited by 12
Deng, N., Zeng, Q., Yang, F. Y., Gao, H., Wang, G., Yan, J., Zheng, T., Liu, Y., Kang, W., & Cheng, B. (2023) · Catalysis Science & Technology · doi:10.1039/d3cy00708a · Cited by 12
AlAqad, K. M., Tanimu, A., Abdulazeez, I., & Kandiel, T. A. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.175074 · Cited by 10
Drying of cellulose nanocrystal gel beads using supercritical carbon dioxide
Li, Y., Hua, J., Han, B., & Zhang, Y. (2019) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5936 · Cited by 8
Hu, Z., Shen, T., Chen, X., Yan, Z., Pan, T., & Yu, H. (2023) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2023.08.013 · Cited by 6
Self-citation
Cited by
Jebin, P., Khan, M. R., Shah, S. S., Kamal, S. M. M., Subarna, M. K., Debnath, N., Aziz, M. A., Kim, B., & Ahammad, A. J. S. (2026) · The Chemical Record · doi:10.1002/tcr.202600006 · Cited by 25
Ying, L., Ge, F., Xu, W., Jiang, J., & Zhou, M. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.188097 · Cited by 8
Ying, L., Ge, F., Yang, X., Jiang, J., & Zhou, M. (2026) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2026.140467 · Cited by 8
Cui, Z., Liu, M., Ma, Z., Wang, S., Zou, Y., Xiang, C., & Sun, L. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.182001 · Cited by 6
Dieng, A., Subrati, A., Kavousi, Z. H., Ndiaye, N. M., Holade, Y., Gutiérrez‐Pineda, E., Moya, S. E., & Ngom, B. D. (2026) · RSC Advances · doi:10.1039/d6ra05091c
Metadata
- Authors
- Shen, T., Chen, X., Hu, Z., Yan, Z., Yang, L., Sun, H., Zhang, R., & Yu, H.-Y.
- Affiliations
- Zhejiang Sci-Tech University (CN)
- Nankai University (CN)
- Tianjin Normal University (CN)
- Corresponding author
- Chen, Xiang
- Yan, Zhenhua
- Sun, Hongming
- Yu, Hou-Yong
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-12-25
- Volume
- 41
- Issue
- 1
- Pages
- 694-703
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W4405787876
- Semantic Scholar
- f61e9975230ab4c65f8fe0861fcc2132b920fcaf
- Cited by
- 9
- References
- 65
- Citations by year
- 2026: 7 · 2025: 2
- FWCI
- 0.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China (2022YFA1504000)
- National Natural Science Foundation of China (52273095)
- Natural Science Foundation of Zhejiang Province (LQ23B030011, LR22E030002)
- Zhejiang Province (2022C01049, 2023C01104)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- cobalt phosphide, cellulose nanofibers, alkaline water electrolysis, oxygen evolution reaction, hydrogen evolution reaction, bifunctional electrocatalysts, heterointerface, overall water splitting, active site density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.