CoChat

Suppression of Phase Separation for Exclusive Stereocomplex Crystallization of a High-Molecular-Weight Racemic Poly( l -lactide)/Poly( d -lactide) Blend from the Glassy State

The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.

Abstract

Despite considerable efforts, however, the exclusive stereocomplex (SC) formation in neat high-molecular-weight (high-MW) poly( l -lactide)/poly( d -lactide) (PLLA/PDLA) blends remains challenging. This challenge in part arises from the incomplete understanding of the influence of processing conditions. Here, the cold crystallization behavior from the glassy state of high-MW racemic PLLA/PDLA blends prepared via spin-coating and solution-casting methods was investigated mainly by infrared spectroscopy, calorimetry, and atomic force microscopy (AFM). It was found that the rate of solvent evaporation greatly affected the crystallization and stereocomplexation behavior of glassy PLLA/PDLA blends. Particularly, upon cold crystallization at temperatures well below the melting temperature of homocrystals, it was demonstrated that the exclusive SC crystallization occurred from the glassy state that was established from dilute solution by sufficiently fast spin-coating, whereas the homocrystallization was prohibited even at a low-temperature range close to the glass transition temperature . AFM observations indicated that sufficiently rapid solvent evaporation resulted in the homogeneous mixing state, which is a crucial prerequisite for the exclusive stereocomplexation, whereas slow solvent evaporation led to the phase-separated structure that was probably dominated by spinodal decomposition and thus to the predominant homocrystallization. On the basis of the Flory–Huggins theory, the results were reasonably explained by the suppression of phase separation, which was achieved via rapid solvent evaporation. The present findings not only provide a new approach toward exclusive SC formation in neat high-MW PLLA/PDLA blends but also have important implications for further mechanistic understanding of the SC crystallization of polymers.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.macromol.0c00112

Cites

74 of 74 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 74 references

Research works printed but not linked: 1

  1. 10.1016/j.addr.2016.04.017 · DOI · Paper page

Cited by

Metadata

Authors
Liu, J., Qi, X., Feng, Q., & Lan, Q.
Affiliations
Southern Medical University (CN)
Corresponding author
  • Feng, Qianjin
  • Lan, Qiaofeng
Venue
Macromolecules
Published
2020-04-28
Volume
53
Issue
9
Pages
3493-3503
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W3022830248
Cited by
60
References
73
Citations by year
2026: 7 · 2025: 12 · 2024: 8 · 2023: 14 · 2022: 9 · 2021: 8 · 2020: 2
FWCI
3.13
Type
journal article
Language
en
Open access
closed
Locations
Macromolecules (publishedVersion)
Funders
National Natural Science Foundation of China (21404012)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
stereocomplex crystallization, poly(L-lactic acid), poly(D-lactide), PLLA/PDLA blends, phase separation suppression, cold crystallization, solvent evaporation rate, spin coating, solvent casting, spinodal decomposition, Flory-Huggins theory, polymer blends

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.