The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Closed-Loop Recyclable Fully Bio-Based Epoxy Vitrimers from Ferulic Acid-Derived Hyperbranched Epoxy Resin
Abstract
Epoxy vitrimers with dynamic covalent networks enable reprocessing and recycling of epoxy thermosets. However, achieving high mechanical performance remains a challenge. In this work, ferulic acid-based hyperbranched epoxy resin (FEHBP) was synthesized to produce closed-loop recyclable and catalyst-free epoxy vitrimers without compromising its thermal and mechanical properties. The incorporation of FEHBP with a hyperbranched topological structure improved the tensile strength, modulus, and toughness of epoxy vitrimers through an in situ reinforcing and toughening mechanism. The hydroxyls of FEHBP catalyzed the dynamic transesterification and accelerated the reprocessing of epoxy vitrimers. Thus, the obtained epoxy vitrimers demonstrated excellent weldability, malleability, and programmability. Epoxy vitrimers with 10 phr FEHBP exhibited high tensile strength (126.4 MPa), usable T g (94 °C), fast stress relaxation (a relaxation time of 45 s at 140 °C) and a retention of tensile strength (above 88.3%) upon recycling. The degradation products were reused to produce new epoxy vitrimers under mild conditions with similar mechanical properties and thermal stability as the original epoxy vitrimers, leading to closed-loop recyclable, fully bio-based epoxy vitrimers with potential for industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Catalytic Control of the Vitrimer Glass Transition
Capelot, M., Unterlass, M. M., Tournilhac, F., & Leibler, L. (2012) · ACS Macro Letters · doi:10.1021/mz300239f · Cited by 1,206
Ruiz de Luzuriaga, A., Martin, R., Markaide, N., Rekondo, A., Cabañero, G., Rodríguez, J., & Odriozola, I. (2016) · Materials Horizons · doi:10.1039/c6mh00029k · Cited by 886
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Self-citationVitrimers: directing chemical reactivity to control material properties
Guerre, M., Taplan, C., Winne, J. M., & Du Prez, F. E. (2020) · Chemical Science · doi:10.1039/d0sc01069c · Cited by 621
Cleavable comonomers enable degradable, recyclable thermoset plastics
Shieh, P., Zhang, W., Husted, K. E. L., Kristufek, S. L., Xiong, B., Lundberg, D. J., Lem, J., Veysset, D., Sun, Y., Nelson, K. A., et al. (2020) · Nature · doi:10.1038/s41586-020-2495-2 · Cited by 498
Functional epoxy vitrimers and composites
Yang, Y., Xu, Y., Ji, Y., & Wei, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100710 · Cited by 463
Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability
Liu, T., Hao, C., Wang, L., Li, Y., Liu, W., Xin, J., & Zhang, J. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01889 · Cited by 441
Self-citationRecyclable and Malleable Epoxy Thermoset Bearing Aromatic Imine Bonds
Zhao, S., & Abu-Omar, M. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01976 · Cited by 435
Liu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Yang, X., Guo, L., Xu, X., Shang, S., & Liu, H. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108248 · Cited by 393
Chen, M., Zhou, L., Wu, Y., Zhao, X., & Zhang, Y. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00015 · Cited by 389
Vanillin-Based Epoxy Vitrimer with High Performance and Closed-Loop Recyclability
Memon, H., Liu, H., Rashid, M. A., Chen, L., Jiang, Q., Zhang, L., Wei, Y., Liu, W., & Qiu, Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02006 · Cited by 378
Liu, T., Zhao, B., & Zhang, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122392 · Cited by 364
Self-citationBio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers
Ma, S., Liu, X., Jiang, Y., Tang, Z., Zhang, C., & Zhu, J. (2013) · Green Chem. · doi:10.1039/c2gc36715g · Cited by 346
A Catalyst-Free Epoxy Vitrimer System Based on Multifunctional Hyperbranched Polymer
Han, J., Liu, T., Hao, C., Zhang, S., Guo, B., & Zhang, J. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01424 · Cited by 335
Self-citationCarbon nanotube–vitrimer composite for facile and efficient photo-welding of epoxy
Yang, Y., Pei, Z., Zhang, X., Tao, L., Wei, Y., & Ji, Y. (2014) · Chem. Sci. · doi:10.1039/c4sc00543k · Cited by 320
Si, H., Zhou, L., Wu, Y., Song, L., Kang, M., Zhao, X., & Chen, M. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108278 · Cited by 279
Memon, H., Wei, Y., Zhang, L., Jiang, Q., & Liu, W. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108314 · Cited by 262
Bio‐based epoxy vitrimers: Reprocessibility, controllable shape memory, and degradability
Ma, Z., Wang, Y., Zhu, J., Yu, J., & Hu, Z. (2017) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28544 · Cited by 249
Wu, J., Yu, X., Zhang, H., Guo, J., Hu, J., & Li, M.-H. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c01047 · Cited by 244
Wu, X., Yang, X., Yu, R., Zhao, X.-J., Zhang, Y., & Huang, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02102c · Cited by 230
Zhou, F., Guo, Z., Wang, W., Lei, X., Zhang, B., Zhang, H., & Zhang, Q. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.07.041 · Cited by 225
Altuna, F. I., Hoppe, C. E., & Williams, R. J. J. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.045 · Cited by 218
Hao, C., Liu, T., Zhang, S., Liu, W., Shan, Y., & Zhang, J. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02243 · Cited by 215
Self-citationSolvent Assisted Pressure-Free Surface Welding and Reprocessing of Malleable Epoxy Polymers
Shi, Q., Yu, K., Dunn, M. L., Wang, T., & Qi, H. J. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00858 · Cited by 211
Liu, H., Zhang, H., Wang, H., Huang, X., Huang, G., & Wu, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.177 · Cited by 209
Wang, S., Ma, S., Li, Q., Xu, X., Wang, B., Huang, K., liu, Y., & Zhu, J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00036 · Cited by 208
Synthesis and properties of a bio-based epoxy resin from 2,5-furandicarboxylic acid (FDCA)
Deng, J., Liu, X., Li, C., Jiang, Y., & Zhu, J. (2015) · RSC Advances · doi:10.1039/c5ra00242g · Cited by 196
Recyclable thermoset hyperbranched polymers containing reversible hexahydro-s-triazine
Xu, Z., Liang, Y., Ma, X., Chen, S., Yu, C., Wang, Y., Zhang, D., & Miao, M. (2019) · Nature Sustainability · doi:10.1038/s41893-019-0444-6 · Cited by 170
Self-citationBiobased, reprocessable and weldable epoxy vitrimers from epoxidized soybean oil
Liu, Y.-Y., He, J., Li, Y.-D., Zhao, X.-L., & Zeng, J.-B. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112576 · Cited by 168
Hayashi, M., & Yano, R. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01896 · Cited by 167
Glycerol Induced Catalyst‐Free Curing of Epoxy and Vitrimer Preparation
Liu, T., Zhang, S., Hao, C., Verdi, C., Liu, W., Liu, H., & Zhang, J. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800889 · Cited by 164
Self-citationDynamic Curing Agents for Amine-Hardened Epoxy Vitrimers with Short (Re)processing Times
Spiesschaert, Y., Guerre, M., De Baere, I., Van Paepegem, W., Winne, J. M., & Du Prez, F. E. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02526 · Cited by 161
Qiu, J., Ma, S., Wang, S., Tang, Z., Li, Q., Tian, A., Xu, X., Wang, B., Lü, N., & Zhu, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02359 · Cited by 158
Altuna, F. I., Hoppe, C. E., & Williams, R. J. J. (2016) · RSC Advances · doi:10.1039/c6ra18010h · Cited by 156
Liu, Y., Wang, B., Ma, S., Yu, T., Xu, X., Li, Q., Wang, S., Han, Y., Yu, Z., & Zhu, J. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108654 · Cited by 148
Liu, Y., Tang, Z., Wang, D., Wu, S., & Guo, B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta10909a · Cited by 145
Xue, B., Tang, R. H., Xue, D., Guan, Y., Sun, Y., Zhao, W., Tan, J., & Li, X. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113583 · Cited by 128
Hayashi, M., Yano, R., & Takasu, A. (2019) · Polymer Chemistry · doi:10.1039/c9py00293f · Cited by 120
Xu, X., Ma, S., Wang, S., Wu, J., Li, Q., Lü, N., Liu, Y., Yang, J., Feng, J., & Zhu, J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01419b · Cited by 119
Tao, Y., Fang, L., Dai, M., Wang, C., Sun, J., & Fang, Q. (2020) · Polymer Chemistry · doi:10.1039/d0py00545b · Cited by 113
Xu, Y., Fu, P., Dai, S., Zhang, H., Bi, L., Jiang, J., & Chen, Y. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113978 · Cited by 113
Ma, X., Xu, H., Xu, Z., Jiang, Y. P., Chen, S., Cheng, J., Zhang, J., Miao, M., & Zhang, D. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00437 · Cited by 108
Self-citationLiu, Y., Wang, B., Ma, S., Xu, X., Qiu, J., Li, Q., Wang, S., Lü, N., Ye, J., & Zhu, J. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110236 · Cited by 104
Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Rieger, B., & Schlögl, S. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102946 · Cited by 89
Tangthana-umrung, K., Poutrel, Q.-A., & Grésil, M. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00861 · Cited by 87
Zeng, Y., Liu, S., Xu, X., Chen, Y., & Zhang, F. (2020) · Polymer · doi:10.1016/j.polymer.2020.123116 · Cited by 83
Liu, Y., Ma, S., Li, Q., Wang, S., Huang, K., Xu, X., Wang, B., & Zhu, J. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109881 · Cited by 71
Wu, J., Gao, L., Guo, Z., Zhang, H., Zhang, B., Hu, J., & Li, M. (2021) · Green Chemistry · doi:10.1039/d1gc01274f · Cited by 70
Recycling Epoxy by Vitrimerization: Influence of an Initial Thermoset Chemical Structure
Yue, L., Amirkhosravi, M., Gong, X., Gray, T. G., & Manas‐Zloczower, I. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c04815 · Cited by 68
Biobased Dynamic Polymer Networks with Rapid Stress Relaxation
Zhao, S., Wang, D., & Russell, T. P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c02826 · Cited by 67
Synthesis of Mechanically Robust and Self-Healing UV-Curable Materials from Renewable Feedstock
Wang, S., Dai, J., Teng, N., Hu, J., Zhao, W., & Liu, X. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05501 · Cited by 60
Aelst, K. V., Sinay, E. V., Vangeel, T., Zhang, Y., Renders, T., den Bosch, S. V., Aelst, J. V., & Sels, B. F. (2021) · Chemical Communications · doi:10.1039/d1cc02263f · Cited by 50
Huan, X., Wu, T., Yan, J., Jia, X., Zu, L., Sui, G., & Yang, X. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108656 · Cited by 46
Wang, H., Liu, H., Zhang, Y., Xu, H., Jin, B., Cao, Z., Wu, H., Huang, G., & Wu, J. (2021) · Chinese Journal of Polymer Science · doi:10.1007/s10118-021-2538-7 · Cited by 32
Dynamic Crosslinking: An Efficient Approach to Fabricate Epoxy Vitrimer
Ran, Y., Zheng, L.-J., & Zeng, J. (2021) · Materials · doi:10.3390/ma14040919 · Cited by 31
Folding fluorescent probes for self-reporting transesterification in dynamic polymer networks
Wang, S., Wang, H., Zhang, P., Xue, L., Chen, J., & Cui, J. (2021) · Materials Horizons · doi:10.1039/d0mh02024a · Cited by 16
Cited by
Toughness and its mechanisms in epoxy resins
Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100977 · Cited by 683
Self-citation
Metadata
- Authors
- Zhong, L., Hao, Y., Zhang, J., Wei, F., Li, T., Miao, M., & Zhang, D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-01-05
- Volume
- 55
- Issue
- 2
- Pages
- 595-607
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4221033820
- Cited by
- 266
- References
- 58
- FWCI
- 17.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.