The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
High Strength Chitosan Hydrogels with Biocompatibility via New Avenue Based on Constructing Nanofibrous Architecture
Abstract
Breaking the limitation of traditional acid dissolving methods for chitosan by creating an alkali/urea hydrogen-bonded chitosan complex, a new solvent (4.5 wt % LiOH/7 wt % KOH/8 wt % urea aqueous solution) was used to successfully dissolve chitosan via the freezing–thawing process, for the first time. Subsequently, high strength hydrogels with unique nanofibrous architecture were constructed from the chitosan alkaline solution. The results from 13 C NMR, laser light scattering, atomic force microscopy, transmission electron microscopy, and scanning electron microscopy confirmed that chitosan easily aggregated in the solution and could self-assemble in parallel to form perfect regenerated nanofibers induced by heating. At elevated temperature and concentration, the regenerated chitosan nanofibers could entangle and cross-link with each other through hydrogen bonds to form hydrogels. The novel chitosan hydrogels exhibited homogeneous architecture and high strength as a result of the strong networks woven with the compact nanofibers. The compression fracture stress of the chitosan hydrogels was nearly 100 times that of the chitosan hydrogels prepared by the traditional acid dissolving method, revealing that the nanofibrous network microstructures contributed greatly to the reinforcement of the hydrogels. Furthermore, the chitosan hydrogels exhibited excellent biocompatibility and safety as well as a smart controlled drug release behavior triggered by acid. Therefore, we opened up a completely new avenue to construct high strength chitosan hydrogels for applications in biomedicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
Chitosan-based hydrogels for controlled, localized drug delivery
Bhattarai, N., Gunn, J., & Zhang, M. (2010) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.019 · Cited by 2,451
Cellulose-based hydrogels: Present status and application prospects
Chang, C., & Zhang, L. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.023 · Cited by 1,081
Self-citationRapid Dissolution of Cellulose in LiOH/Urea and NaOH/Urea Aqueous Solutions
Cai, J., & Zhang, L. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400222 · Cited by 1,047
Self-citationA photolabile hydrogel for guided three-dimensional cell growth and migration
Luo, Y., & Shoichet, M. S. (2004) · Nature Materials · doi:10.1038/nmat1092 · Cited by 801
Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery
Chang, C., Duan, B., Cai, J., & Zhang, L. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.033 · Cited by 795
Self-citationZhang, Y., Tao, L., Li, S., & Wei, Y. (2011) · Biomacromolecules · doi:10.1021/bm200423f · Cited by 670
Graphene oxide–chitosan composite hydrogels as broad-spectrum adsorbents for water purification
Chen, Y., Chen, L., Bai, H., & Li, L. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00406b · Cited by 664
Novel Biocompatible Polysaccharide‐Based Self‐Healing Hydrogel
Wei, Z., Yang, J. H., Liu, Z. Q., Xu, F., Zhou, J. X., Zrínyi, M., Osada, Y., & Chen, Y. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401502 · Cited by 660
Influence of acetic acid concentration on the solubilization of chitosan
Rinaudo, M., Pavlov, G., & Desbrières, J. (1999) · Polymer · doi:10.1016/s0032-3861(99)00056-7 · Cited by 645
Ladet, S., David, L., & Domard, A. (2008) · Nature · doi:10.1038/nature06619 · Cited by 543
Determination of the degree of deacetylation of chitin and chitosan by X-ray powder diffraction
Zhang, Y., Xue, C., Xue, Y., Gao, R., & Zhang, X. (2005) · Carbohydrate Research · doi:10.1016/j.carres.2005.05.005 · Cited by 485
Polymer Scaffolds for Biomaterials Applications
Shoichet, M. S. (2010) · Macromolecules · doi:10.1021/ma901530r · Cited by 468
Adsorption of congo red by chitosan hydrogel beads impregnated with carbon nanotubes
Chatterjee, S., Lee, M. W., & Woo, S. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.10.051 · Cited by 444
Dynamic Self-Assembly Induced Rapid Dissolution of Cellulose at Low Temperatures
Cai, J., Zhang, L., Liu, S., Liu, Y., Xu, X., Chen, X., Chu, B., Guo, X., Xu, J., Cheng, H., et al. (2008) · Macromolecules · doi:10.1021/ma801110g · Cited by 433
Self-citationExperimental methods in polymer chemistry
C.P. (1981) · Journal of Molecular Structure · doi:10.1016/0022-2860(81)80025-7 · Cited by 406
Typical Physicochemical Behaviors of Chitosan in Aqueous Solution
Schatz, C., Viton, C., Delair, T., Pichot, C., & Domard, A. (2003) · Biomacromolecules · doi:10.1021/bm025724c · Cited by 396
Solid state structure of chitosan prepared under different N-deacetylating conditions
Harish Prashanth, K. (2002) · Carbohydrate Polymers · doi:10.1016/s0144-8617(01)00371-x · Cited by 310
Swelling Behaviors of pH- and Salt-Responsive Cellulose-Based Hydrogels
Chang, C., He, M., Zhou, J., & Zhang, L. (2011) · Macromolecules · doi:10.1021/ma102801f · Cited by 300
Self-citationSpagnol, C., Rodrigues, F. H. A., Pereira, A. G. B., Fajardo, A. R., Rubira, A. F., & Muniz, E. C. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.10.017 · Cited by 281
Preparation and Solubility in Acid and Water of Partially Deacetylated Chitins
Cho, Y.-W., Jang, J., Park, C. R., & Ko, S.-W. (2000) · Biomacromolecules · doi:10.1021/bm000036j · Cited by 260
Chang, C., Chen, S., & Zhang, L. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03075a · Cited by 223
Self-citationShi, Z., Gao, H., Feng, J., Ding, B., Cao, X., Kuga, S., Wang, Y., Zhang, L., & Cai, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402751 · Cited by 216
Self-citationIn Situ Forming Chitosan Hydrogels Prepared via Ionic/Covalent Co-Cross-Linking
Moura, M. J., Faneca, H., Lima, M. P., Gil, M. H., & Figueiredo, M. M. (2011) · Biomacromolecules · doi:10.1021/bm200731x · Cited by 208
Fang, Y., Duan, B., Lu, A., Liu, M., Liu, H., Xu, X., & Zhang, L. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00195 · Cited by 202
Self-citationLiu, K.-H., Liu, T.-Y., Chen, S.-Y., & Liu, D.-M. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.01.012 · Cited by 196
Facile preparation of robust and biocompatible chitin aerogels
Ding, B., Cai, J., Huang, J., Zhang, L., Chen, Y., Shi, X., Du, Y., & Kuga, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16032c · Cited by 191
Self-citationPeng, S., Meng, H., Ouyang, Y., & Chang, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402855t · Cited by 174
High strength films with gas-barrier fabricated from chitin solution dissolved at low temperature
Duan, B., Chang, C., Ding, B., Cai, J., Xu, M., Feng, S., Ren, J., Shi, X., Du, Y., & Zhang, L. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00068g · Cited by 171
Self-citationStrongly fluorescent hydrogels with quantum dots embedded in cellulose matrices
Chang, C., Peng, J., Zhang, L., & Pang, D. (2009) · Journal of Materials Chemistry · doi:10.1039/b908835k · Cited by 153
Self-citationCopello, G. J., Mebert, A. M., Raineri, M., Pesenti, M. P., & Diaz, L. E. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.097 · Cited by 149
Primo, A., & Quignard, F. (2010) · Chemical Communications · doi:10.1039/c0cc01137a · Cited by 139
Controlled release of ofloxacin from chitosan–montmorillonite hydrogel
Hua, S., Yang, H., Wang, W., & Wang, A. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.07.012 · Cited by 139
Hejazi, R., & Amiji, M. M. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00985-1 · Cited by 138
He, M., Wang, Z., Cao, Y. X., Zhao, Y., Duan, B., Chen, Y., Xu, M. H., & Zhang, L. (2014) · Biomacromolecules · doi:10.1021/bm500827q · Cited by 125
Self-citationZhang, H., Qadeer, A., & Chen, W. (2011) · Biomacromolecules · doi:10.1021/bm101192b · Cited by 111
Enhanced mechanical strength of chitosan hydrogel beads by impregnation with carbon nanotubes
Chatterjee, S., Lee, M. W., & Woo, S. H. (2009) · Carbon · doi:10.1016/j.carbon.2009.06.043 · Cited by 108
Cited by
A review on chitosan and its nanocomposites in drug delivery
Ali, A., & Ahmed, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.078 · Cited by 1,127
Recent advances in regenerated cellulose materials
Wang, S., Lu, A., & Zhang, L. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.07.003 · Cited by 1,033
Self-citationYang, Y., Wang, X., Yang, F., Shen, H., & Wu, D. (2016) · Advanced Materials · doi:10.1002/adma.201601742 · Cited by 637
Recent advances in chitin based materials constructed via physical methods
Duan, B., Huang, Y., Lu, A., & Zhang, L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.04.001 · Cited by 386
Self-citationBao, Z., Xian, C., Yuan, Q., Liu, G., & Wu, J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900670 · Cited by 383
Metadata
- Authors
- Duan, J., Liang, X., Cao, Y., Wang, S., & Zhang, L.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-06
- Volume
- 48
- Issue
- 8
- Pages
- 2706-2714
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2326712873
- Cited by
- 303
- References
- 37
- FWCI
- 9.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.