Toughening of Cocontinuous Polylactide/Polyethylene Blends via an Interfacially Percolated Intermediate Phase
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
It will be shown that an interfacially percolated rubbery phase in a cocontinuous polylactide (PLA)/linear low-density polyethylene (LLDPE) blend results in a significant increase in the impact strength. All blends possess a tricontinuous phase morphology in which poly(ε-caprolactone) (PCL), poly(ethylene–methyl acrylate) (EMA), and ethylene–methyl acrylate–glycidyl methacrylate (EMA-GMA) percolate at the interface of PLA/LLDPE but offer different toughening and compatibilization effects. Among these components, the addition of EMA-GMA to the binary PLA/LLDPE blend reduces the cocontinuous PLA/LLDPE phase thickness from about 25 to 5 μm and yields a very tough material with an impact strength of about 515 J/m, which is approximately 13 times greater than the original cocontinuous PLA/LLDPE blend and more than 32 times that of PLA. The ternary blends show significant improvements in the impact strength within the tricontinuous region; however, the principal differences in the toughening effects are attributed to interfacial interactions between the phases. The interconnected network of the rubbery phase is expected to percolate the stress field throughout the tricontinuous system and reduce the detrimental dilatational stress in the bulk blend.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Three-phase interactions in shear and electrical fields
Torza, S., & Mason, S. G. (1970) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(70)90073-1 · Cited by 555
Effect of interfacial forces on polymer blend morphologies
HOBBS, S., DEKKERS, M., & WATKINS, V (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 455
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Understanding interfacial influence on properties of polymer nanocomposites
Idumah, C. I., & Obele, C. M. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100879 · Cited by 272
Biobased Polymer Composites: A Review
Pokharel, A., Falua, K. J., Babaei-Ghazvini, A., & Acharya, B. (2022) · Journal of Composites Science · doi:10.3390/jcs6090255 · Cited by 163
“…acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153]. copolymers (PE-b-PLLA) [146,147], maleic anhydride grafted PE (MAPE) [148–150], ethylene-glycidyl methacrylate copolymer (EGMA) [151,152], and ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153].”
BackgroundDeng, S., Bai, H., Liu, Z., Zhang, Q., & Fu, Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02626 · Cited by 141
Liu, H., Chen, N., Shan, P., Song, P., Liu, X., & Chen, J. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01398 · Cited by 129
Xu, X., Dai, J., Ma, Z., Liu, L., Zhang, X., Liu, H., Tang, L., Huang, G., Wang, H., & Song, P. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107930 · Cited by 124
Chen, X., Zeng, Z., Ju, Y., Zhou, M., Bai, H., & Fu, Q. (2023) · Polymer · doi:10.1016/j.polymer.2022.125620 · Cited by 114
Zhao, X., Li, J., Liu, J., Zhou, W., & Peng, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.154 · Cited by 89
Chang, F., Hu, B., Huang, W., Chen, L., Yin, X., Cao, X., & He, G. (2022) · Polymer · doi:10.1016/j.polymer.2022.125336 · Cited by 76
Zhang, H., Kang, B.-H., Chen, L.-S., & Lu, X. H. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106521 · Cited by 74
Polylactic Acid/Lignin Composites: A Review
Shi, K., Liu, G., Sun, H., & Weng, Y. (2023) · Polymers · doi:10.3390/polym15132807 · Cited by 75
Ferri, J. M., García‐García, D., Rayón, E., Samper, M. D., & Balart, R. (2020) · Polymers · doi:10.3390/polym12061344 · Cited by 62
“Other compatibilizers reported in the literature are maleic anhydride grafted PE (PE-g-MA) [23,25,32], ethylene-glycidyl methacrylate copolymer (EGMA) [33,34], and ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [34,35].”
BackgroundNiu, D., Xu, P., Sun, Z., Yang, W., Dong, W., Ji, Y., Liu, T. X., Du, M., Lemstra, P. J., & Ma, P. (2021) · Polymer · doi:10.1016/j.polymer.2021.124269 · Cited by 62
Optimizing bioplastics translation
Hào, L. T., Ju, S., Hwang, D. K., Hwang, D. S., Ok, Y. S., Hwang, S. Y., Kim, H. J., Jeon, H., Park, J., Oh, D. X., et al. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-023-00142-5 · Cited by 55
“Polymer blending, chain modification and crosslinking, and filler addition could help to improve these physical properties 18,81–83 .”
Wang, H., Chen, J., & Li, Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01804 · Cited by 52
Andrzejewski, J., & Nowakowski, M. (2021) · Materials · doi:10.3390/ma14061523 · Cited by 49
Guan, J., Ding, N., Xu, P., Yang, W., Niu, D., Zhang, X., Liu, T. X., & Ma, P. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01950 · Cited by 42
Ahmadi, H., van Heugten, P. M. H., Veber, A. A., Puškar, L., Anderson, P. D., & Cardinaels, R. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c10829 · Cited by 41
Mazidi, M. M., Sharifi, H., Aghjeh, M. K. R., Zare, L., Khonakdar, H. A., & Reuter, U. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c21722 · Cited by 42
Liu, H., Zhang, T., Cai, Y. T., Deng, S., Bai, D., Bai, H., Zhang, Q., & Fu, Q. (2018) · Polymer · doi:10.1016/j.polymer.2018.11.013 · Cited by 40
Si, W., Zhang, H., Li, Y., Huang, C., Weng, Y., & Zeng, J. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108155 · Cited by 41
Yang, R., Cao, H., Zhang, P., Chen, L., Zou, G., Zhang, X., & Li, J. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01095 · Cited by 39
Zhang, H., Yuan, W.-Q., Weng, Y., Zeng, J., & Li, Y. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.114707 · Cited by 40
Guan, J., Luo, W., Lu, S., Yang, Y., Shen, X., Tang, B., & Li, Y. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109611 · Cited by 38
Daelemans, L., Paepegem, W. V., D’hooge, D., & Clerck, K. D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201807434 · Cited by 40
High-reactive silica nanosheets as compatibilizers for immiscible PLLA/PBAT polymer blends
Yang, X., Wei, F., Wang, Z., Li, G., Yang, S., & Feng, J. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.109979 · Cited by 37
Cai, K., Wang, Q., Liu, X., Tu, S., Wang, J., & Feng, J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c02812 · Cited by 35
Jiang, G., Li, H., & Wang, F. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102215 · Cited by 38
Andrzejewski, J., Grad, K., Wiśniewski, W., & Szulc, J. (2021) · Journal of Composites Science · doi:10.3390/jcs5100253 · Cited by 36
Choi, I. S., Kim, Y. K., Hong, S. H., Seo, H., Hwang, S.-H., Kim, J., & Lim, S. K. (2024) · Materials · doi:10.3390/ma17030662 · Cited by 33
“Bulk modification can be achieved by incorporating plasticizers, nucleating agents, inorganic fillers, or other toughening materials such as PCL, PBS [6], PBAT, or PE [7].”
BackgroundToughening Poly(lactic acid) with Thermoplastic Elastomers Modified by Thiol–ene Click Chemistry
Yan, J., & Spontak, R. J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01657 · Cited by 32
Lu, X. H., Kang, B.-H., & Shi, S. (2019) · Polymers · doi:10.3390/polym11101583 · Cited by 32
“Compared with synthesizing a new polymer, the blending of various thermoplastic polymers is an important and efficient technique to developing high performance polymeric materials [1,2].”
MethodWang, X., Li, Y., Jiao, Y., Zhou, H., & Wang, X. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01466-3 · Cited by 28
“This was because the chemical structure, molecular weight and chain architecture of block copolymer could be designed reasonably and the block copolymer could localize at the interfaces and stabilize the morphology [56].”
BackgroundJia, S., Chen, Y., Yu, Y., Han, L., Zhang, H., & Dong, L. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.068 · Cited by 27
Jiang, H. M., Ding, Y., Liu, J., Arun, A., Pan, L., Song, D., Zhang, K., & Li, Y. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00988 · Cited by 27
Ferreira, E. D. S. B., Luna, C. B. B., Siqueira, D. D., Filho, E. A. D. S., Araújo, E. M., & Wellen, R. M. R. (2021) · Sustainability · doi:10.3390/su132112157 · Cited by 27
Jiang, M., Qin, J., Liu, J., Deng, Z., Zou, H. H., & Qiu, B. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c09794 · Cited by 25
Heidari, B. S., Chen, P., Ruan, R., Davachi, S. M., Al-Salami, H., De Juan Pardo, E., Zheng, M., & Doyle, B. (2021) · Journal of Materials Chemistry B · doi:10.1039/d0tb02971h · Cited by 23
Ali, S., Deiab, I. M., Pervaiz, S., & Eltaggaz, A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27123 · Cited by 22
Lu, X. H., Sheng, M., Deng, Y., Lu, J., Wu, H., Li, Y., Liu, Z., Tong, Y., & Qu, J. (2022) · Polymer · doi:10.1016/j.polymer.2022.125165 · Cited by 21
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Müller, A. J., & Cavallo, D. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02295 · Cited by 21
Self-citationZhang, T., Zhou, M.-X., Guo, Z., Zhao, Y., Han, D., Xiu, H., Bai, H., Zhang, Q., & Fu, Q. (2021) · Chinese Journal of Polymer Science · doi:10.1007/s10118-021-2565-4 · Cited by 20
Shi, K., Liu, G., Sun, H., Yang, B., & Weng, Y. (2023) · ACS Omega · doi:10.1021/acsomega.3c01738 · Cited by 20
Nematollahi, M., Jalali‐Arani, A., & Modarress, H. (2019) · Polymer International · doi:10.1002/pi.5767 · Cited by 20
Zhang, J., Hong, J., Wang, H., & Li, Y. (2023) · Composites Communications · doi:10.1016/j.coco.2023.101680 · Cited by 18
Hu, K., Huang, D., Jiang, H. M., Sun, S.-T., Ma, Z., Zhang, K., Pan, L., & Li, Y. (2019) · ACS Omega · doi:10.1021/acsomega.9b02639 · Cited by 19
Evaluating PE / PLA interfacial tension using ternary immiscible polymer blends
Gu, L., & Macosko, C. W. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50623 · Cited by 18
Mazidi, M. M., Aghjeh, M. K. R., & Pegoretti, A. (2023) · Polymer · doi:10.1016/j.polymer.2023.126186 · Cited by 17
Zhao, C., Wang, J., Zhao, B., Chang, E., Lee, P., & Park, C. B. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129603 · Cited by 17
Yang, R., Cao, H., Li, C., Zou, G., Zhang, X., & Li, J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51413 · Cited by 16
Fazli, A., & Rodrigue, D. (2022) · Molecules · doi:10.3390/molecules27206819 · Cited by 15
Liu, P., Zhang, Q., Wu, H. K., Guo, S., & Qiu, J. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c01868 · Cited by 14
Al‐Saleh, M. H., & El-Methaly, H. M. (2024) · Synthetic Metals · doi:10.1016/j.synthmet.2024.117592 · Cited by 14
Eraslan, K., Altınbay, A., & Nofar, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132936 · Cited by 14
Ye, H., Li, A., Li, G., Li, K., Zhang, J., Wang, D., Ray, S. S., Wang, H., & Li, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01319 · Cited by 15
Ye, H., Li, C., Zhang, Y., Yan, X., Wang, H., & Li, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02467 · Cited by 14
Nofar, M., Mohammadi, M., & Carreau, P. J. (2021) · Journal of Rheology · doi:10.1122/8.0000234 · Cited by 14
Zhai, Y., Yong, L., Wang, X., Zhang, C., Deng, P., Chen, H., Zhang, R., Bao, R., Zhou, Y., Yang, M., et al. (2022) · Polymer · doi:10.1016/j.polymer.2022.125324 · Cited by 14
Zhang, J., Dong, W., Li, X., Wei, Y., Hu, Z., Shiju, E., Zheng, J., Chen, H., & Wang, S. (2024) · Polymer Composites · doi:10.1002/pc.28783 · Cited by 13
Wu, M. S., Huang, H., & Yu, L.-M. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106918 · Cited by 13
Lee, J., Hwang, G., Kwon, Y. S., & Jeong, Y. G. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100122 · Cited by 13
Fully bio-based ternary polymer blends: structural characterization and mechanical behavior
Arrigo, R., D'Anna, A., & Frache, A. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2022.100314 · Cited by 18
Excellent Compatibilization Effect of a Dual Reactive Compatibilizer on the Immiscible MVQ/PP Blends
Wang, H., Tian, H., Zhang, S., Yu, B., Ning, N., Tian, M., & Zhang, L. (2023) · Chinese Journal of Polymer Science · doi:10.1007/s10118-023-2945-z · Cited by 13
Polylactide/poly(vinyl monomer) block copolymers for specific applications
Bednarek, M., & Grabowski, M. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2310105 · Cited by 15
Zuo, H., Liu, J., Huang, D., Bai, Y., Cui, L., Pan, L., Zhang, K., & Wang, H. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210175 · Cited by 13
Al‐Saleh, M. H., & Al-Shboul, T. S. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057221128189 · Cited by 13
“In addition, it has a high melting temperature, good processability, competitive tensile strength, and biocompatibility.(7,8) However, the low toughness of PLA compared to conventional polymers is one of its drawbacks.”
BackgroundYu, Q., Ye, C., Gu, X., & Li, Y. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01556 · Cited by 12
Song, D., Wang, K., Shen, J., Zhao, L., Xu, N., Pang, S., & Pan, L. (2020) · Polymers · doi:10.3390/polym12010106 · Cited by 10
“Polymers as toughening phases mainly include biodegradable polymers, such as poly(butylene adipate–co–terephthalate) (PBAT) [11], poly(butylene succinate–co–adipate) (PBSA) [12], poly(ε-caprolactone) (PCL) [13]; and non-degradable polymers, such as polyethylene (PE) [14], poly(ethylene vinyl acetate) (EVA) [15], ethyl…”
BackgroundHeterogeneous network design strategy toward mechanically robust and recyclable elastomers
Fang, S., Wang, J., Wu, S., Yu, S., Tang, Z., & Guo, B. (2022) · Polymer · doi:10.1016/j.polymer.2022.124710 · Cited by 9
Song, L., Yang, B., Du, X., Ren, J., Wang, W., Zhang, Q., Chi, W., Cong, F., & Shi, Y. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00239 · Cited by 9
Kajornprai, T., Jarapanyacheep, R., Saikaeo, J., Pojprapai, S., Jarukumjorn, K., & Trongsatitkul, T. (2024) · Polymers · doi:10.3390/polym16131906 · Cited by 8
“Similar co-continuous blend morphologies have also been observed in 50/50 wt% blends of PLA with linear low-density polyethylene (LLDPE) [29] and high-density polyethylene (HDPE) [30] systems.”
BackgroundYu, L., Qiu, Y., Yang, B., Gao, M., Song, L., Jing, Y., Chi, W., Wang, X., Zhang, L., Gao, J., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138554 · Cited by 8
Zhang, Y., Shi, H., Chen, H., Han, C., & Wang, L. (2022) · Thermochimica Acta · doi:10.1016/j.tca.2022.179272 · Cited by 8
Yang, F., Liu, N., Niu, C., Ding, Y., Chen, Q., Liu, D. N., & Chen, F. (2024) · Polymer · doi:10.1016/j.polymer.2024.127502 · Cited by 7
Hou, L., Wang, X., Feng, B., Yin, M., Zhang, M., Zhang, X., Sun, G., Ma, J., & Li, P. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-04054-9 · Cited by 7
Sun, Z.-B., Song, Y., Ma, G.-Q., Gao, P., Xie, Z., Gao, X., Li, Y., Xu, J., Zhong, G., & Li, Z. (2021) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202100012 · Cited by 7
PLA binary blends with petroleum-based nondegradable thermoplastics
Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00006-6 · Cited by 7
Yusuf, M., Dari, N., Siregar, R., & Amne, D. P. F. (2022) · RASAYAN Journal of Chemistry · doi:10.31788/rjc.2022.1536673 · Cited by 7
Wang, B., Zheng, Q., Li, M., Wang, S., Xiao, S., Li, X., & Liu, H. (2022) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2022.39 · Cited by 6
Yu, Y., Fan, J., Xu, G., & Zhang, J. (2024) · Polymer · doi:10.1016/j.polymer.2024.127615 · Cited by 5
Introduction to polymer blends
Nofar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824150-9.00002-9 · Cited by 5
Dong, W., He, M., Ren, F., Li, Y., Hanada, T., Lee, S., Hakukawa, H., Yamahira, N., & Horiuchi, S. (2020) · Journal of Polymer Science · doi:10.1002/pol.20190006 · Cited by 5
Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108930 · Cited by 5
Self-citationHuang, Y., Chen, L., Zheng, S., Wu, X., Liu, L., Ke, K., Liu, Z., Yang, W. M., & Yang, M. (2020) · Polymer · doi:10.1016/j.polymer.2020.122384 · Cited by 5
Strengthen oriented poly (L-lactic acid) monofilaments via mechanical training
Zhang, Y., Dong, X., Zhang, C., Wu, X., Cheng, J., Wu, G., Sun, R., Ni, Z., & Zhao, G. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129975 · Cited by 4
Markowski, M., Piasecki, A., & Andrzejewski, J. (2025) · Polymers · doi:10.3390/polym17111463 · Cited by 4
Yang, F., Qv, C., Pan, L., Ma, Z., & Li, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01225 · Cited by 4
A new empirical model for quiescent annealing of binary co-continuous polymer blends
Abdolrasouli, M. H., Dil, E. J., & Khorshidi, J. (2021) · Iranian Polymer Journal · doi:10.1007/s13726-021-00912-1 · Cited by 4
“a Taken from[35] b Taken from[36] Sample ηeff = (ηo1 + ηo2)/2 (Pa.”
Aksoy, Ö., Doğru, A., Yücetürk, M., Alyamaç, E., & Seydibeyoğlu, M. Ö. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824272-8.00001-4 · Cited by 4
Tao, S., Qiang, Z., & Ren, J. (2025) · Polymer International · doi:10.1002/pi.6751 · Cited by 3
Peng, C., Xie, D., & Liu, H. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57608 · Cited by 3
Gong, L., Hu, Z., Chen, Y., Zhang, J., Cao, W., Liu, X., Chen, W., & Bao, J. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250032 · Cited by 2
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Müller, A. J., & Cavallo, D. (2020) · Polymer Crystallization · doi:10.1002/pcr2.10145 · Cited by 2
Self-citationJiang, T., Wang, X.-Y., Liu, H., Yu, L. F., Park, C. B., & Wang, J. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c03221 · Cited by 2
Du, Y., Liu, G., Zhou, L., Hu, J., Wang, W., Bian, X., Duan, R., & Chen, X. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03165 · Cited by 1
Abdolrasouli, M. H., Dil, E. J., & Khorshidi, J. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25755 · Cited by 1
Physico-Chemical Modifications of Block Copolymers and Their Gels for Enhanced Functionality.
Yan, J. (2021) · NCSU Libraries Repository (North Carolina State University Libraries)
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14 · Cited by 1
Analysis of Properties of Secondary Polymer Raw Materials and Polyethylene-Based Mixtures
Podzorova, M. V., Kolesnikova, L. A., & Kondrev, V. S. (2025) · Polymer Science Series D · doi:10.1134/s1995421225701023
ポリエチレンカーボネート/ポリ乳酸ブレンドの物性および分解性評価
Ramlee, N. A. (2019) · Institutional Repositories DataBase (IRDB)
Metadata
- Authors
- Zolali, A. M., & Favis, B. D.
- Affiliations
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Favis, Basil D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-02
- Volume
- 51
- Issue
- 10
- Pages
- 3572-3581
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2801742117
- Cited by
- 100
- References
- 50
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 16 · 2023: 10 · 2022: 16 · 2021: 20 · 2020: 15 · 2019: 8 · 2018: 3
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Funders
- Government of Canada
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, linear low-density polyethylene, polymer blends, impact strength, toughening, co-continuous morphology, polycaprolactone, compatibilization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.