Toughening of Cocontinuous Polylactide/Polyethylene Blends via an Interfacially Percolated Intermediate Phase
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
It will be shown that an interfacially percolated rubbery phase in a cocontinuous polylactide (PLA)/linear low-density polyethylene (LLDPE) blend results in a significant increase in the impact strength. All blends possess a tricontinuous phase morphology in which poly(ε-caprolactone) (PCL), poly(ethylene–methyl acrylate) (EMA), and ethylene–methyl acrylate–glycidyl methacrylate (EMA-GMA) percolate at the interface of PLA/LLDPE but offer different toughening and compatibilization effects. Among these components, the addition of EMA-GMA to the binary PLA/LLDPE blend reduces the cocontinuous PLA/LLDPE phase thickness from about 25 to 5 μm and yields a very tough material with an impact strength of about 515 J/m, which is approximately 13 times greater than the original cocontinuous PLA/LLDPE blend and more than 32 times that of PLA. The ternary blends show significant improvements in the impact strength within the tricontinuous region; however, the principal differences in the toughening effects are attributed to interfacial interactions between the phases. The interconnected network of the rubbery phase is expected to percolate the stress field throughout the tricontinuous system and reduce the detrimental dilatational stress in the bulk blend.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Three-phase interactions in shear and electrical fields
Torza, S., & Mason, S. G. (1970) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(70)90073-1 · Cited by 555
Effect of interfacial forces on polymer blend morphologies
HOBBS, S., DEKKERS, M., & WATKINS, V (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 455
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Understanding interfacial influence on properties of polymer nanocomposites
Idumah, C. I., & Obele, C. M. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100879 · Cited by 272
Biobased Polymer Composites: A Review
Pokharel, A., Falua, K. J., Babaei-Ghazvini, A., & Acharya, B. (2022) · Journal of Composites Science · doi:10.3390/jcs6090255 · Cited by 163
“…acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153]. copolymers (PE-b-PLLA) [146,147], maleic anhydride grafted PE (MAPE) [148–150], ethylene-glycidyl methacrylate copolymer (EGMA) [151,152], and ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153].”
BackgroundDeng, S., Bai, H., Liu, Z., Zhang, Q., & Fu, Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02626 · Cited by 141
Liu, H., Chen, N., Shan, P., Song, P., Liu, X., & Chen, J. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01398 · Cited by 129
Metadata
- Authors
- Zolali, A. M., & Favis, B. D.
- Affiliations
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Favis, Basil D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-02
- Volume
- 51
- Issue
- 10
- Pages
- 3572-3581
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2801742117
- Cited by
- 100
- References
- 50
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 16 · 2023: 10 · 2022: 16 · 2021: 20 · 2020: 15 · 2019: 8 · 2018: 3
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Funders
- Government of Canada
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, linear low-density polyethylene, polymer blends, impact strength, toughening, co-continuous morphology, polycaprolactone, compatibilization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.