Toughening of Cocontinuous Polylactide/Polyethylene Blends via an Interfacially Percolated Intermediate Phase
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
It will be shown that an interfacially percolated rubbery phase in a cocontinuous polylactide (PLA)/linear low-density polyethylene (LLDPE) blend results in a significant increase in the impact strength. All blends possess a tricontinuous phase morphology in which poly(ε-caprolactone) (PCL), poly(ethylene–methyl acrylate) (EMA), and ethylene–methyl acrylate–glycidyl methacrylate (EMA-GMA) percolate at the interface of PLA/LLDPE but offer different toughening and compatibilization effects. Among these components, the addition of EMA-GMA to the binary PLA/LLDPE blend reduces the cocontinuous PLA/LLDPE phase thickness from about 25 to 5 μm and yields a very tough material with an impact strength of about 515 J/m, which is approximately 13 times greater than the original cocontinuous PLA/LLDPE blend and more than 32 times that of PLA. The ternary blends show significant improvements in the impact strength within the tricontinuous region; however, the principal differences in the toughening effects are attributed to interfacial interactions between the phases. The interconnected network of the rubbery phase is expected to percolate the stress field throughout the tricontinuous system and reduce the detrimental dilatational stress in the bulk blend.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Three-phase interactions in shear and electrical fields
Torza, S., & Mason, S. G. (1970) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(70)90073-1 · Cited by 555
Effect of interfacial forces on polymer blend morphologies
HOBBS, S., DEKKERS, M., & WATKINS, V (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 455
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Bartczak, Z., Argon, A. S., Cohen, R. E., & Weinberg, M. (1999) · Polymer · doi:10.1016/s0032-3861(98)00445-5 · Cited by 280
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Structure-properties of super-tough PLA alloy with excellent heat resistance
Hashima, K., Nishitsuji, S., & Inoue, T. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.045 · Cited by 256
The measurement of interfacial tension in polymer/polymer systems: The breaking thread method
Elemans, P. H. M., Janssen, J. M. H., & Meijer, H. E. H. (1990) · Journal of Rheology · doi:10.1122/1.550087 · Cited by 237
Toughening mechanism of rubber-modified polyamides
Muratoglu, O. K., Argon, A. S., Cohen, R. E., & Weinberg, M. (1995) · Polymer · doi:10.1016/0032-3861(95)93590-i · Cited by 217
Wang, Y., & Hillmyer, M. A. (2001) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1254 · Cited by 212
Notched impact behavior of polymer blends: Part 1: New model for particle size dependence
Bucknall, C. B., & Paul, D. R. (2009) · Polymer · doi:10.1016/j.polymer.2009.09.059 · Cited by 186
Eguiburu, J. L., Iruin, J. J., Fernandez-Berridi, M. J., & Román, J. S. (1998) · Polymer · doi:10.1016/s0032-3861(98)00182-7 · Cited by 167
Study of Morphologies of PMMA/PP/PS Ternary Blends
Valera, T. S., Morita, A. T., & Demarquette, N. R. (2006) · Macromolecules · doi:10.1021/ma052571n · Cited by 147
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301842e · Cited by 144
Reactive Compatibilization of Polylactide/Polypropylene Blends
Xu, Y., Loi, J., Delgado, P., Topolkaraev, V., McEneany, R. J., Macosko, C. W., & Hillmyer, M. A. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00882 · Cited by 124
Bai, S., Wang, G., Hiver, J. M., & G'Sell, C. (2004) · Polymer · doi:10.1016/j.polymer.2004.02.070 · Cited by 120
Temperature dependence of some thermodynamic functions for amorphous and semi-crystalline polymers
Mathot, V. (1984) · Polymer · doi:10.1016/0032-3861(84)90025-9 · Cited by 118
Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide)
Zolali, A. M., Heshmati, V., & Favis, B. D. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02310 · Cited by 117
Self-citationSakai, F., Nishikawa, K., Inoue, Y., & Yazawa, K. (2009) · Macromolecules · doi:10.1021/ma901547a · Cited by 113
Adhesion between Immiscible Polymers Correlated with Interfacial Entanglements
Cole, P. J., Cook, R. F., & Macosko, C. W. (2003) · Macromolecules · doi:10.1021/ma020789t · Cited by 112
Coarsening of immiscible co‐continuous blends during quiescent annealing
Yuan, Z., & Favis, B. D. (2004) · AIChE Journal · doi:10.1002/aic.10281 · Cited by 111
Self-citationHigh-Strength Welds in Metallocene Polypropylene/Polyethylene Laminates
Chaffin, K. A., Knutsen, J. S., Brant, P., & Bates, F. S. (2000) · Science · doi:10.1126/science.288.5474.2187 · Cited by 110
Mechanical Properties of Polymer Blends
Bartczak, Z., & Gałęski, A. (2014) · Springer eBooks · doi:10.1007/978-94-007-6064-6_13 · Cited by 106
Characterizing co-continuous high density polyethylene/polystyrene blends
Li, J., & Favis, B. D. (2001) · Polymer · doi:10.1016/s0032-3861(00)00785-0 · Cited by 93
Self-citationBell, J. R., Chang, K., López‐Barrón, C. R., Macosko, C. W., & Morse, D. C. (2010) · Macromolecules · doi:10.1021/ma902805x · Cited by 81
Image analysis for interfacial area and cocontinuity detection in polymer blends
Galloway, J. A., Montminy, M. D., & Macosko, C. W. (2002) · Polymer · doi:10.1016/s0032-3861(02)00282-3 · Cited by 80
PLLA Microalloys Versus PLLA Nanoalloys: Preparation, Morphologies, and Properties
Dong, W., Jiang, F., Zhao, L., You, J., Cao, X., & Li, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3007577 · Cited by 77
Omonov, T. S., Harrats, C., & Groeninckx, G. (2005) · Polymer · doi:10.1016/j.polymer.2005.10.022 · Cited by 72
Zolali, A. M., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.093 · Cited by 72
Self-citationAccelerating Reactive Compatibilization of PE/PLA Blends by an Interfacially Localized Catalyst
Thurber, C. M., Xu, Y., Myers, J. C., Lodge, T. P., & Macosko, C. W. (2014) · ACS Macro Letters · doi:10.1021/mz500770y · Cited by 66
Heshmati, V., Zolali, A. M., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.05.056 · Cited by 63
Self-citationA new model for the coarsening of cocontinuous morphologies
López‐Barrón, C. R., & Macosko, C. W. (2010) · Soft Matter · doi:10.1039/b926191e · Cited by 55
Molecular Mobilities in Biodegradable Poly(dl-lactide)/Poly(ε-caprolactone) Blends
Newman, D., Laredo, E., Bello, A., Grillo, A., Feijoo, J. L., & Müller, A. J. (2009) · Macromolecules · doi:10.1021/ma9007303 · Cited by 51
Polylactide/Biopolyethylene bioblends
Brito, G. D. F., Agrawal, P., Araújo, E. M., & de Mélo, T. J. A. (2012) · Polímeros · doi:10.1590/s0104-14282012005000072 · Cited by 50
Feng, Y., Zhao, G., Yin, J., & Jiang, W. J. (2013) · Polymer International · doi:10.1002/pi.4632 · Cited by 46
Dou, R., Zhou, Y., Shen, C., Li, L., Yin, B., & Yang, M. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1266-3 · Cited by 43
Benkoski, J. J., Flores, P., & Krämer, E. J. (2003) · Macromolecules · doi:10.1021/ma034013j · Cited by 38
Tuning Polymer Blends to Cocontinuous Morphology by Asymmetric Diblock Copolymers as the Surfactants
Pu, G., Luo, Y., Wang, A., & Li, B. (2011) · Macromolecules · doi:10.1021/ma1026719 · Cited by 38
High performance materials based on a self‐assembled multiple‐percolated ternary blend
Ravati, S., Beaulieu, C., Zolali, A. M., & Favis, B. D. (2014) · AIChE Journal · doi:10.1002/aic.14495 · Cited by 35
Self-citationGani, L., Tencé‐Girault, S., Milléquant, M., Bizet, S., & Ludwik Leibler, B. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900552 · Cited by 21
Partial and Complete Wetting in Ultralow Interfacial Tension Multiphase Blends with Polylactide
Zolali, A. M., & Favis, B. D. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b08800 · Cited by 21
Self-citationStudies on blends of LLDPE and ethylene-methacrylic acid random copolymer
Zhao, H., Lei, Z., Wang, Z., & Huang, B. (1999) · European Polymer Journal · doi:10.1016/s0014-3057(98)00112-8 · Cited by 9
The interface dynamics of bicontinuous phase separating structure in a polymer blend
Saito, H., Yoshinaga, M., Mihara, T., Nishi, T., & Jinnai, H. (2009) · Journal of Physics Conference Series · doi:10.1088/1742-6596/184/1/012029 · Cited by 4
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Understanding interfacial influence on properties of polymer nanocomposites
Idumah, C. I., & Obele, C. M. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100879 · Cited by 272
Biobased Polymer Composites: A Review
Pokharel, A., Falua, K. J., Babaei-Ghazvini, A., & Acharya, B. (2022) · Journal of Composites Science · doi:10.3390/jcs6090255 · Cited by 163
“…acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153]. copolymers (PE-b-PLLA) [146,147], maleic anhydride grafted PE (MAPE) [148–150], ethylene-glycidyl methacrylate copolymer (EGMA) [151,152], and ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer [152,153].”
BackgroundDeng, S., Bai, H., Liu, Z., Zhang, Q., & Fu, Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02626 · Cited by 141
Liu, H., Chen, N., Shan, P., Song, P., Liu, X., & Chen, J. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01398 · Cited by 129
Metadata
- Authors
- Zolali, A. M., & Favis, B. D.
- Affiliations
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Favis, Basil D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-02
- Volume
- 51
- Issue
- 10
- Pages
- 3572-3581
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2801742117
- Cited by
- 100
- References
- 50
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 16 · 2023: 10 · 2022: 16 · 2021: 20 · 2020: 15 · 2019: 8 · 2018: 3
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Funders
- Government of Canada
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, linear low-density polyethylene, polymer blends, impact strength, toughening, co-continuous morphology, polycaprolactone, compatibilization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.