Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
The DOI matches its Crossref record; 73 of the 74 references it cites were found in a registry or an index.
Abstract
This work shows that the environmental-friendly biorenewable and biodegradable poly(lactic acid) (PLLA) can be made to have superior mechanical and thermal characteristics and thus show promise to replace conventional petroleum-based polymers such as polyethylene terephthalate. Using time-resolved polarized optical microscopy (POM), we have investigated how and why conventional crystallization tends to cause deterioration of ductility in semicrystalline PLLA. Specifically, the POM study based on partially crystallized PLLA samples promotes the idea that the spherulitic crystals are mechanically weaker than glassy noncrystalline domains whose cohesive strength stems from the chain networking because of intermolecular uncrossability. By removing the large spherulitic crystal formation and inducing nanocrystal formation through melt-stretching of PLLA in its amorphous state, we identified a completely transparent crystalline state of PLLA that is extremely tough and resistant against heat.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
Research works printed but not linked: 6
- Auras R. A., 2011, Poly(lactic acid): Synthesis, Structures, Properties, Processing, and Applications, 10
- 10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i · doi:10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i
- 10.1122/1.1896957 · DOI · Paper page
- Rault J., 1985, C. R. Acad. Sci., Ser. II: Mec., Phys., Chim., Sci. Terre Univers, 300, 433
- Wang S. Q., 2016, Polymer Glasses
- Gruenwald G., 1960, Mod. Plast., 38, 137
Cited by
Items 101–200 of 212
Du, F., Bonadies, I., Longo, A., Rupp, H., Lorenzo, M. L. D., & Androsch, R. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c00462 · Cited by 9
Chitrakar, C., Torres, M. A., Rocha-Flores, P. E., Hu, Q., & Ecker, M. (2023) · Polymers · doi:10.3390/polym15214226 · Cited by 9
Bennin, T., Xing, E., Ricci, J., & Ediger, M. D. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01489 · Cited by 12
Schippers, C., Bahners, T., Gutmann, J. S., & Tsarkova, L. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01274 · Cited by 9
Aversa, C., Barletta, M., Gisario, A., Prati, R., & Vesco, S. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51557 · Cited by 12
Double Yielding in Deformation of Semicrystalline Polymers
Razavi, M., & Wang, S. (2020) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202000151 · Cited by 10
Self-citationXie, Z., Guo, M., Chen, Z., & Hua, J. (2023) · Polymer Composites · doi:10.1002/pc.27576 · Cited by 7
Nakayama, Y., Matsu-ura, T., Tanaka, R., Shiono, T., Hino, S., Kawasaki, N., Yamano, N., Nakayama, A., Tezuka, R., & Tanaka, K. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110978 · Cited by 8
Promoting Effect of Synergetic Nucleating Agent on Crystallization Behavior of Polylactic Acid
Hu, Y., Shen, H., Ni, H., Liu, Y., Zhang, L., & Ju, G. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56796 · Cited by 8
Omoniyi, Z. A., Liu, F., Yang, H., & Feng, X. (2025) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.70001 · Cited by 8
Deciphering the Code of Poly(L‐lactic acid) Monofilament Achieving Orientation Limit
Zhao, G., Wang, B., Hou, Y., Liu, J., Zhang, C., Hu, X. F., Wu, G., Jiang, W., Yang, J., & Ni, Z. (2025) · Small · doi:10.1002/smll.202504025 · Cited by 12
Smith, T., Gupta, C., Siavoshani, A. Y., & Wang, S. (2023) · Polymer · doi:10.1016/j.polymer.2023.125878 · Cited by 8
Self-citationXu, L., Chen, Y., Xu, C. H., Huang, H., Lin, H., Zhong, G., & Li, Z. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01938 · Cited by 8
Cheng, H., Wang, L., & Han, C. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56280 · Cited by 7
Arias-Blanco, A., Tataru, G., Marco, M., Miguélez, M. H., & Coqueret, X. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111476 · Cited by 7
Role of Inorganic Fillers on the Physical Aging and Toughness Loss of PLLA/BaSO4 Composites
Larrañaga, X., Sarasua, J.-R., & Zuza, E. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02112 · Cited by 7
“19 However, the structural rearrangement of chains toward the corresponding lower thermodynamic equilibrium state of the glass known as physical aging, 20 − 22 sorely decreases the thermodynamic state of amorphous polymers, making the chain network to activate a smaller fraction of the surrounding…”
Tajari, N., Sadrnia, H., & Hosseini, F. (2023) · International Polymer Processing · doi:10.1515/ipp-2023-4338 · Cited by 11
Craze, A. R., Kerr, R. W. F., McGuire, T. M., Wille, L., & Williams, C. K. (2025) · Green Chemistry · doi:10.1039/d5gc02301g · Cited by 6
Bahraminasab, M., Arabhalvaei, M., & Ghanbari, M. A. (2025) · BioMedical Engineering OnLine · doi:10.1186/s12938-025-01475-5 · Cited by 7
Evaluating the Potential of Polylactide Nonwovens as Bio-Based Media for Air Filtration
Schippers, C., Marx, E., Taubner, R., Gutmann, J. S., & Tsarkova, L. (2021) · Textiles · doi:10.3390/textiles1020014 · Cited by 6
Shahnooshi, M., Schneider, K., Javadi, A., & Altstädt, V. (2023) · Polymer · doi:10.1016/j.polymer.2023.126254 · Cited by 6
Li, H., Yu, Z., Liu, B., Gao, Y., Liu, M., Zhang, J., Ruoff, R. S., & Wang, B. (2025) · SmartMat · doi:10.1002/smm2.1316 · Cited by 7
Schippers, C., Gutmann, J. S., & Tsarkova, L. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16159 · Cited by 6
END‐OF‐LIFE SCENARIOS FOR POLY(LACTIC ACID)
Bher, A., Castro‐Aguirre, E., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch24 · Cited by 8
Barrera-Juca, D., Lazaro‐Hdez, C., Gómez-Caturla, J., Guijarro, N., Marset, X., & Balart, R. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144152 · Cited by 5
Hu, Y., Ni, H., Zhang, K., Chang, J., Ma, T., & Shen, H. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57419 · Cited by 5
Xu, M., Zhu, W., Qiu, H., Zhang, Y., Li, F., He, H., Zhu, Z., & Huang, Y. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c01412 · Cited by 6
Ding, S., Cui, L., Xie, K., & Liu, Y. (2025) · Polymer · doi:10.1016/j.polymer.2025.129154 · Cited by 5
Sun, M., Liu, J., Yu, M., Yan, W., & Han, K. (2024) · Polymer · doi:10.1016/j.polymer.2024.127436 · Cited by 6
Park, S. J., Lim, H., Lee, S. J., Im, S. H., Lee, J. M., Jung, Y., Kim, S. H., Shim, J.-S., Won, J., Chung, J. J., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01768 · Cited by 7
Guo, Z., Song, W., Song, Y., Liu, X., Guo, Z., & Sun, D. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02953-4 · Cited by 7
“However, since the composites are still brittle [11], the reinforcement is not always satisfactory.”
Ekatan, S. R., Xue, T., Song, Z., Yang, T., Ndaya, D. M., Shaw, M. T., Cheng, J., & Lin, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02005 · Cited by 5
Advances in Synthetic Biodegradable Polymers: Scaled-up Structuring and High Performance
Ma, G.-Q., Li, L., Lei, J., Zhong, G., & Li, Z.-M. (2025) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2025.2517100 · Cited by 5
“[25,134] The well-aligned lamellae lead to a more tortuosity diffusion path for oxygen and water vapor, corresponding to better barrier performance.”
Zanoni, A., Tollini, F., Casiraghi, C., Storti, G., Sponchioni, M., & Moscatelli, D. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24800 · Cited by 5
Wu, S., Wang, B., Xu, X., Wu, C., Hu, T., Zheng, X., & Gong, X. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50933 · Cited by 5
Chai, J., Wang, G., Wang, S., Shao, R., & Zhao, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03240 · Cited by 4
Self-citationSchwarz, D. B., & Eagan, J. M. (2022) · ACS symposium series · doi:10.1021/bk-2022-1412.ch010 · Cited by 4
Zhang, H. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54374 · Cited by 4
Lan, K.-Y., Liu, C., Xu, P., Li, D.-L., Yu, J., Zhong, G., Huang, H., & Li, Z. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01327 · Cited by 4
Biomimetic 2D-oriented microporous PLLA scaffolds: Fabrication and evaluation for bone repair
Li, Y., Feng, Y., Zhao, Z., Liu, L., Li, Z., & Li, J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143918 · Cited by 4
Beaucamp, A., Vaughan, M., & Collins, M. N. (2025) · Polymer Composites · doi:10.1002/pc.30022 · Cited by 4
“4 In addition, the semi-crystallinity of this polymer renders it brittle 5 and has been reported to lead to anisotropy in the printed parts.”
Xiang, P., Fan, L., Li, S., Cao, N., Wan, C., Bi, S., Chen, X., & Yu, P. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51539 · Cited by 4
Yuan, Q.-W., Zhang, Y., Qin, S., & Qu, J. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01895 · Cited by 4
Liu, P., Ji, Y., Wu, H. K., & Guo, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125543 · Cited by 4
Yang, H., Huang, H., Lei, J., Zhou, S., Zhong, G., & Li, Z. (2024) · Polymer · doi:10.1016/j.polymer.2024.126932 · Cited by 4
Luo, J., Wang, W., Wang, Z., & Wang, X. (2025) · Polymer science & technology. · doi:10.1021/polymscitech.5c00065 · Cited by 3
Rahman, S. S., Tuccitto, A. V., Rejeb, Z. B., Lee, P., & Park, C. B. (2025) · Small · doi:10.1002/smll.202508286 · Cited by 3
Picco, C. M., Bastida, G. A., Tarrés, Q., Regenhardt, S. A., & Marc, D.-A. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149937 · Cited by 3
Khajavi, M. Z., Nikiforov, A. Y., Masoomian, M., Ahmadi, S., Geyter, N. D., & Farhoodi, M. (2026) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2026.101707 · Cited by 4
Zheng, G.-F., Han, L., Ma, T.-Y., Bian, J., Lin, J.-L., Zhao, Y., Pan, H., Wang, Z., & Zhang, H.-L. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3565-1 · Cited by 3
Guo, W., Liu, E., Wang, X., & Li, L. E. (2026) · Polymer · doi:10.1016/j.polymer.2026.130179 · Cited by 3
Guo, Z., Song, W., Wei, X., Yu, F., Song, Y., & Cheng, W. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03846-9 · Cited by 3
“Nevertheless, its use is still restricted due to its hardness and brittleness, low processability and heat resistance [10–13].”
BackgroundSynergistic toughening of polylactide by layer structure and network structure
Sun, M., Zhang, Z., He, Y., Yan, W., Yu, M., & Han, K. (2024) · Polymer · doi:10.1016/j.polymer.2024.127969 · Cited by 5
Ginzburg, V. V. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00361 · Cited by 3
“62,65,66 The amorphous phase should be mainly composed of trapped entanglements or tie chains.”
Wei, H., Yan, S., & Menary, G. (2021) · Polymers · doi:10.3390/polym13060967 · Cited by 4
“The relevance between processing temperature and the resulting morphology has been studied universally by applying uniaxial stretch [18,19].”
BackgroundMechanical Rejuvenation of Polylactide: Critical Role of Mobile Amorphous Phase
Sun, S., Huang, W., Zhou, J., Li, X., & Chen, P. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202401126 · Cited by 3
Homogeneous biopolymer films based on polybutylene adipate terephthalate for packaging applications
Kralin, A., Kamjaikittikul, A., Lertvilai, P., Sirisaksoontorn, W., & Jamnongkan, T. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-10891-w · Cited by 4
“In fact, PLA is a hard, brittle polyester material at room temperature [61].”
Oliveira, L. R. D., Nonato, R. C., Bonse, B. C., & Morales, A. R. (2022) · Polymer Engineering and Science · doi:10.1002/pen.26086 · Cited by 3
Tajari, N., Sadrnia, H., & Hosseini, F. (2022) · Research Square · doi:10.21203/rs.3.rs-1783654/v1 · Cited by 3
Gong, L., Hu, Z., Chen, Y., Zhang, J., Cao, W., Liu, X., Chen, W., & Bao, J. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250032 · Cited by 2
Unveiling the Amorphous Phase Contribution to Shear Piezoelectric Properties of Polylactide
Shen, H., Charlon, S., & Samuel, C. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01023 · Cited by 2
How does chain length affect fracture of a brittle polymer glass?
Ahn, C. H., Chen, Z., Bao, X., & Suo, Z. (2025) · Extreme Mechanics Letters · doi:10.1016/j.eml.2025.102431 · Cited by 2
Xiao, B., Hu, X., Su, K., Weng, Y., & Zhang, C. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00221 · Cited by 3
Zhang, H., Zhang, X., Chang, Y., Lu, S., Song, Y., & Zhang, W. (2026) · Polymer · doi:10.1016/j.polymer.2026.130489 · Cited by 1
Zhang, Z., Wu, C., Wang, A.-Y., Sun, D., Qi, X., Yang, J., & Wang, Y. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140799 · Cited by 2
Yuan, Z., Liu, Y., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04474 · Cited by 1
Material-process-structure-property Relationships in Stereocomplex-Reinforced Poly(lactide)
Tuccitto, A. V., & Lee, P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00056-9 · Cited by 3
Zhang, J., Gao, X., Ni, Z.-K., Jia, D., Lin, H., Huang, H., Zhong, G., & Li, Z. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3331-9 · Cited by 2
Qiang, T., Wang, C., Gao, H., Qiang, H., Qi, X., Sun, Y., Su, X., & Wang, S. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05800-9 · Cited by 2
“However, some disadvantages of PLA, such as high brittleness, high cost, slow crystallization rate, low crystallinity, and poor heat resistance, have limited its widespread application in many potential fields [11–13].”
Self-citationDurably ductile polylactide monofilaments via stress-induced mesophase formation
Huang, W., Sun, S., Ge, W., Shi, Y., Yuan, T., Beckers, K., Joziasse, C. A. P., & Chen, P. (2025) · Polymer · doi:10.1016/j.polymer.2025.128762 · Cited by 1
Wu, R., Luo, M., Wang, Z., Bai, W., & Wang, Q. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3410-y · Cited by 1
A Uni‐Directional Biodegradable Stent for Systematic Modulation in Biliary Diseases
Zhao, G., Cao, Y., Hu, X. F., Hou, Y., Liu, J., Wu, G., Lv, J., Wu, C. H., Yao, A., & Ni, Z. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202503447 · Cited by 4
Obasa, V. D., Olanrewaju, O. A., Owoyemi, I. O., & Adeosun, S. O. (2025) · Journal of Materials Science Composites · doi:10.1186/s42252-025-00079-5 · Cited by 1
Balancing Toughness and Antibacterial Activity of Polylactide Blends with Imidazolium-Based Polymers
Yook, J., Kang, Y., Park, J., & Lee, J. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00603 · Cited by 1
Guan, J., Han, C., Liu, J., Niu, D., Yang, W., Xu, P., & Ma, P. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111843 · Cited by 1
Fu, L., Jiang, L., Dan, Y., & Huang, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.130415 · Cited by 2
Cameron, J., Luccio, T. D., Barr, J., Rocher, L., Kim, E. A., Menary, G., Lennon, A., & Kornfield, J. A. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.10.048 · Cited by 1
Singh, J., & Kumar, R. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01048-x · Cited by 1
“Thus, the polymer crystal-linity affects the physical and mechanical properties of PLA material [18, 19].”
Tian, G., Zhu, Z., Li, B., & He, H. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04478-x · Cited by 1
“Annealing, as a typical post-processing approach, is extensively employed to control the blends' microstructure [13].”
Liu, X., Wang, M., Wu, D. L., Sheng, Y., Song, S., & Zhang, R. (2023) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/accd1f · Cited by 1
Polymer Mechanics: Processing‐Structure–Property
Wang, S. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0045
Self-citationLiu, J., Blosch, S. E., Volokhova, A. S., Crater, E. R., Gallin, C. F., Moore, R. B., Matson, J. B., & Byers, J. A. (2024) · Angewandte Chemie · doi:10.1002/ange.202317699
Development and Characterization of Compliant Bioelectronic Devices for Gastrointestinal Stimulation
Chitrakar, C. (2023) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc2257713
Gómez-Caturla, J. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/203217 · Cited by 1
Poly(lactic acid) blends and copolyesters with advanced properties for biomedical applications
Cutillas, A. M. (2022) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-413341 · Cited by 1
Melt Rheology of Poly(L-lactic Acid) Hybrids with Mesoporous Hollow Silica Nanospheres
Wang, S., & Kwon, Y. K. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03593-6
“…material had a very low Young’s modulus, tensile strength, and high elongation at break, which means that the vast majority of the pure polylactic acid molecular chains are amorphous, with very few regions crystallizing, because the non-crystalline regions provide flexibility and ductility [ 38].”
Self-citationCsézi, G., & Tábi, T. (2025) · Advances in Polymer Technology · doi:10.1155/adv/7082244
“An increasing number of papers focusing on orienting PLA highlighted that drawing PLA fi lms between the glass transition temperature and the cold crystallization temperature ( T cc ) can increase the T g of the polymer [14, 15].”
Adell, N. S., Buj-Corral, I., Domingo-Espin, M., Llumà, J., Travieso-Rodriguez, J. A., Rubio-Palau, J., Fontecha, C. G., Domínguez-Fernández, A., & Valls-Esteve, A. (2025) · Polymers · doi:10.3390/polym17192684
“…common material used in 3D printing for anatomical models, polylactic acid (PLA) has some limitations: it is relatively brittle at room temperature [6], and its fracture properties depend greatly on crystallinity and loading rate [7], which makes it difficult to replicate the properties of bone…”
Thermomechanical characterization of advanced materials
Baniassadi, M., Baghani, M., Rémond, Y., & Silberschmidt, V. V. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-40330-9.00008-5
Wang, W., Liang, W., Zhao, G., Han, R., & Nie, M. (2026) · Polymers · doi:10.3390/polym18020273
“Furthermore, the intrinsic brittleness of PLA often results in inferior mechanical strength compared to conventional polymer microtubes [10].”
Fu, L., Jiang, L., Dan, Y., & Huang, Y. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6156137
Xu, R., Miao, X.-Y., Yang, S., Wang, S., Ma, Y., Müller, A., & Li, Z.-B. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03502 · Cited by 1
Self-citationThree-Dimensional Visualization of the Inhomogeneous Cold Crystallization of Polymers
Li, Y., Gao, S., Li, K., Tian, R., & Lu, C. (2026) · Analytical Chemistry · doi:10.1021/acs.analchem.5c07769
Influence of macromolecular orientation on mechanical behavior of glassy polymers
Xu, S. (2020) · theses.fr (ABES) · doi:10.70675/3ae1ab26zf737z43b6zb3fezde6a786d1e1d · Cited by 1
Shi, Z., ZHAO, Y., Yang, H., Jin, B., Bian, J., & Zhang, H. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70595
Csézi, G., & Tábi, T. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-15669-z
Wang, B., Liu, J., Cao, Y., Lv, J., Zhuang, K., Wu, G., Tian, Y., Cheng, J., Ni, Z., & Zhao, G. (2026) · Journal of Polymers and the Environment · doi:10.1007/s10924-026-03887-3
“Although hydrolysis is the primary mechanism governing in vivo degradation, the kinetics of this process are significantly influenced by multi-level structural characteristics, including crystallinity, lamellar orientation, and crystal morphology [36–38].”
Zhang, R., Du, M., Wang, B., Yu, Y., Sattler, R., Runge, P.-M., Pan, P., Beiner, M., Altenbach, H., Jariyavidyanont, K., et al. (2026) · Journal of Polymer Science · doi:10.1002/pola.70240
Synergistic toughening of polylactic acid using acetylated lignin/Attapulgite hybrid fillers
Ren, Y., Xia, L., Ding, J., Li, X., & Zhao, X. (2026) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057261466141
Metadata
- Authors
- Razavi, M., & Wang, S.-Q.
- Affiliations
- University of Akron (US)
- Corresponding author
- Wang, Shi-Qing
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-12
- Volume
- 52
- Issue
- 14
- Pages
- 5429-5441
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2958227840
- Cited by
- 212
- References
- 74
- Citations by year
- 2026: 29 · 2025: 45 · 2024: 28 · 2023: 41 · 2022: 34 · 2021: 21 · 2020: 12 · 2019: 2
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Macromolecules (publishedVersion)
- Funders
- Division of Materials Research (DMR-1609977)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polylactic acid, crystalline polymers, brittleness, ductility, spherulitic crystals, nanocrystals, melt stretching, chain entanglement, intermolecular crosslinking, toughening, thermal stability, semicrystalline polymers, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.