The DOI matches its Crossref record; 73 of the 74 references it cites were found in a registry or an index.
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Abstract
This work shows that the environmental-friendly biorenewable and biodegradable poly(lactic acid) (PLLA) can be made to have superior mechanical and thermal characteristics and thus show promise to replace conventional petroleum-based polymers such as polyethylene terephthalate. Using time-resolved polarized optical microscopy (POM), we have investigated how and why conventional crystallization tends to cause deterioration of ductility in semicrystalline PLLA. Specifically, the POM study based on partially crystallized PLLA samples promotes the idea that the spherulitic crystals are mechanically weaker than glassy noncrystalline domains whose cohesive strength stems from the chain networking because of intermolecular uncrossability. By removing the large spherulitic crystal formation and inducing nanocrystal formation through melt-stretching of PLLA in its amorphous state, we identified a completely transparent crystalline state of PLLA that is extremely tough and resistant against heat.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
Research works printed but not linked: 6
- Auras R. A., 2011, Poly(lactic acid): Synthesis, Structures, Properties, Processing, and Applications, 10
- 10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i · doi:10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i
- 10.1122/1.1896957 · DOI · Paper page
- Rault J., 1985, C. R. Acad. Sci., Ser. II: Mec., Phys., Chim., Sci. Terre Univers, 300, 433
- Wang S. Q., 2016, Polymer Glasses
- Gruenwald G., 1960, Mod. Plast., 38, 137
Cited by
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Ranakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R. A., & El-Khatib, S. (2022) · Materials · doi:10.3390/ma15124312 · Cited by 311
Sustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
Rahmatabadi, D., Khajepour, M., Bayati, A., Mirasadi, K., Amin Yousefi, M., Shegeft, A., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., et al. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113289 · Cited by 223
Xu, S., Zhou, J., & Pan, P. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101676 · Cited by 166
Zhao, X., Yu, J., Liang, X., Huang, Z., Li, J., & Peng, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123581 · Cited by 153
Concepts of Nucleation in Polymer Crystallization
Xu, J., Reiter, G., & Alamo, R. G. (2021) · Crystals · doi:10.3390/cryst11030304 · Cited by 99
Zhao, X., Li, J., Liu, J., Zhou, W., & Peng, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.154 · Cited by 89
Xu, P., Yang, S., Gao, X., Chen, S., Xu, L., Zhong, G., Huang, H., & Li, Z. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109048 · Cited by 72
Crazing and yielding in glassy polymers of high molecular weight
Razavi, M., Cheng, S., Huang, D., Zhang, S., & Wang, S. (2020) · Polymer · doi:10.1016/j.polymer.2020.122445 · Cited by 67
Self-citationNiu, D., Xu, P., Liu, B., Shao, H., He, C., Liu, T. X., Yang, W., & Ma, P. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01622 · Cited by 64
Physical Aging of Polylactide-Based Graft Block Polymers
Haugan, I. N., Lee, B., Maher, M. J., Zografos, A., Schibur, H. J., Jones, S. D., Hillmyer, M. A., & Bates, F. S. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01434 · Cited by 62
Jalali, A., Kim, J., Zolali, A. M., Soltani, I., Nofar, M., Behzadfar, E., & Park, C. B. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108361 · Cited by 67
Brittle-to-ductile transition of PLA induced by macromolecular orientation
Xu, S., Tahon, J., de Waele, I., Stoclet, G., & Gaucher, V. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.84 · Cited by 64
“[26] have also linked these induced ‘nanocrystals’ to B-D transition observed with uniaxially stretched PLAs.”
Glass transition temperature of poly(d,l-lactic acid) of different molar mass
Zhang, R., Du, F., Jariyavidyanont, K., Zhuravlev, E., Schick, C. H., & Androsch, R. (2022) · Thermochimica Acta · doi:10.1016/j.tca.2022.179387 · Cited by 61
Lin, H., Chen, Y., Gao, X., Xu, L., Lei, J., Zhong, G., & Li, Z. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02072 · Cited by 57
Wei, Q.-Y., Huang, J.-Z., Jia, D., Lei, J., Huang, H., Lin, H., Xu, J., Zhong, G., & Li, Z. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00215 · Cited by 54
Poly(lactic acid) Toughening through Chain End Engineering
Li, K., Wang, Y., Rowe, M. M., Zhao, X., Li, T., Tekinalp, H., & Ozcan, S. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00888 · Cited by 53
Аржакова, О. В., Arzhakov, M. S., Badamshina, E. R., Bryuzgina, E. B., Bryuzgin, E. V., Bystrova, A. V., Vaganov, G., Vasilevskaya, V. V., Vdovichenko, A. Y., Gallyamov, M. O., et al. (2022) · Russian Chemical Reviews · doi:10.57634/rcr5062 · Cited by 60
Chai, J., Wang, G., Zhang, A., Li, S., Zhao, J., Zhao, G., & Park, C. B. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106849 · Cited by 52
Hirata, J., Kurokawa, N., Okano, M., Hotta, A., & Watanabe, S. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00237 · Cited by 46
Huang, Z., Wang, M., Feng, Y., & Qu, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00530 · Cited by 46
Fallah, A., Saleem, Q., & Koç, B. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108165 · Cited by 45
Limsukon, W., Auras, R. A., & Smith, T. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01080 · Cited by 42
Ding, S., Wang, X., & Wang, Z. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00195 · Cited by 45
Zhou, L., Xu, P., Ni, S.-H., Xu, L., Lin, H., Zhong, G., Huang, H., & Li, Z. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2723-3 · Cited by 44
Sun, C., Xu, S., Zhou, J., Ni, L., Xia, J., Bao, Y., Shan, G., & Pan, P. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00494 · Cited by 38
Gómez-Caturla, J., Oliveros, R. T., Martínez, J. I., Sanoguera, D. G., Balart, R., & García‐García, D. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03000-y · Cited by 44
“One of the main drawbacks of PLA is its low ductility, with an elongation at break typically lower than 10%, leading to low toughness [23].”
Jeong, H., Yuk, J. S., Lee, H., Kang, S., Park, H., Park, S. H., & Shin, J. (2021) · Green Chemistry · doi:10.1039/d1gc02049h · Cited by 41
Liu, B., Xu, P., Niu, D., du Sart, G. G., Shi, Y., Joziasse, K., Zhou, Y., Ma, Y., Yang, W., Zhang, X., et al. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02482 · Cited by 39
Bakar, A. A. A., Zainuddin, M. Z., Adam, A. N., Noor, I. M., Tamchek, N., Alauddin, M. S., & Ghazali, M. I. B. M. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.06.198 · Cited by 43
Crazing and Toughness in Diblock Copolymer-Modified Semicrystalline Poly( l -lactide)
McCutcheon, C. J., Zhao, B., Ellison, C. J., & Bates, F. S. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01702 · Cited by 36
Zhou, W., Chen, X., Yang, K., Fang, H., Xu, Z., & Ding, Y. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151393 · Cited by 33
Liu, J., Blosch, S. E., Volokhova, A. S., Crater, E. R., Gallin, C. F., Moore, R. B., Matson, J. B., & Byers, J. A. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202317699 · Cited by 32
Xin, K., Wei, Y., Xiong, J.-X., Ni, Y., Wang, X., & Xu, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156743 · Cited by 32
Sheng, G., Zhou, Z., Yu, S., Chen, Z., Xiang, H., & Zhu, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.270 · Cited by 32
Chen, X., Zhang, Z., Chen, B., Liu, C., Zhang, S., Cao, W., & Wang, Z. (2021) · Polymer · doi:10.1016/j.polymer.2021.123435 · Cited by 28
Hu, J. S., Liu, B., Sun, T., Zhang, J., Yun, X., & Dong, T. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126335 · Cited by 32
Li, J., Xu, M., He, H., Gao, Q., Zhang, Y., Zhang, H., Gu, Q., Xue, B., & Zhu, Z. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00898 · Cited by 29
Zhang, Q., Yang, X., Wang, K., Xu, Z., & Liu, W. (2024) · Advanced Science · doi:10.1002/advs.202310035 · Cited by 32
Wei, Q.-Y., Fang, Y.-D., Sun, Z.-B., Zeng, Y. Z., Zhang, J., Lei, J., Xu, L., Lin, H., Zhong, G., & Li, Z. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107516 · Cited by 29
Zeng, B., Ai, J., Xia, M., Pang, Y., Zheng, Y., Shen, J., & Guo, S. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00249 · Cited by 27
Monfared, A. R., Tuccitto, A. V., Omranpour, H., Rahman, S. S., Zaoui, A., Salehi, A., Rezaei, S., Rahmati, R., Lotocki, V., Seferos, D. S., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154181 · Cited by 31
Moslehi, A., Ajji, A., Heuzey, M., Rahimizadeh, A., & LESSARD, L. B. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51934 · Cited by 28
Degradation of Structurally Modified Polylactide under the Controlled Composting of Food Waste
Трофимчук, Е. С., Ostrikova, V. V., Ivanova, O. A., Moskvina, M. A., Plutalova, A. V., Grokhovskaya, T. Y., Shchelushkina, A. A., Efimov, A., Chernikova, E. V., Zhang, S., et al. (2023) · Polymers · doi:10.3390/polym15194017 · Cited by 29
“…PLA with high performance properties are based on (1) the copolymerization of lactide with various monomers [7,8]; (2) the addition of plasticizers [9,10] ; (3) mixing PLA with other polymers or particles of inorganic nature [11–13] ; and (4) using structural and mechanical approaches [14–17].”
MethodXu, S., Zhou, J., & Pan, P. (2021) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202100427 · Cited by 28
Meinig, L., Boldt, R., Spoerer, Y., Kuehnert, I., & Stommel, M. (2023) · Polymers · doi:10.3390/polym15030721 · Cited by 23
“The reason for this is probably the presence of a robust chain network in the amorphous regions between the spherulites [31].”
BackgroundInfluentialA tasty solution to packaging waste? Life cycle assessment of edible coffee cups
Anand, K., Arce, A. M., Bishop, G., Styles, D., & Fitzpatrick, C. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107320 · Cited by 29
Zhang, Z., Wang, X., Wang, Y., Shen, C., Liu, C., & Wang, Z. (2020) · Polymer · doi:10.1016/j.polymer.2020.122875 · Cited by 23
Optimisation on Thermoforming of Biodegradable Poly (Lactic Acid) (PLA) by Numerical Modelling
Wei, H. (2021) · Polymers · doi:10.3390/polym13040654 · Cited by 24
Niu, D., Li, J., Xu, P., Liu, T. X., Yang, W., Wang, Z., & Ma, P. (2023) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2023.110293 · Cited by 23
Jiang, W., Liang, Y., Zhang, Y., Xie, Z., Zhou, J., Kang, J., Cao, Y. Q., & Xiang, M. (2022) · Polymer · doi:10.1016/j.polymer.2022.125410 · Cited by 22
Hu, J. S., Yun, X., Zheng, Y., Sun, T., Song, L., Pan, P., & Dong, T. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.139218 · Cited by 23
Polyethylene oxide enhances the ductility and toughness of polylactic acid: the role of mesophase
Wang, Z., Zhang, C., Zhang, Z., Chen, X., Wang, X., Wen, M., Chen, B., Cao, W., & Liu, C. (2020) · Soft Matter · doi:10.1039/d0sm00671h · Cited by 20
Xu, S., Sun, C., Yuan, W., Zhou, J., Xu, W., Zheng, Y., Yu, C., & Pan, P. (2022) · Polymer · doi:10.1016/j.polymer.2022.124840 · Cited by 21
Niu, D., Xu, P., Xu, S.-J., Li, J.-X., Yang, W., & Ma, P. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-023-2894-6 · Cited by 21
Preparation of modified polylactic acid fiber containing anti‐hydrolysis agents
Yang, H. J., Kim, Y. K., Son, J. A., Choi, I. S., & Lim, S. K. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54436 · Cited by 19
Inducing nano-confined crystallization in PLLA and PET by elastic melt stretching
Razavi, M., Zhang, W., Khonakdar, H. A., Janke, A., Li, L., & Wang, S. (2021) · Soft Matter · doi:10.1039/d0sm02181d · Cited by 20
Self-citationSun, X., Guo, Y., Wang, R., Tang, H., Wang, L., & Qin, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.04.051 · Cited by 20
Marwaha, D., Gautam, S., Singh, N., Rai, N., Sharma, M., Tiwari, P., Shukla, R. P., Urandur, S., Banala, V. T., Mugale, M. N., et al. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113316 · Cited by 19
Lv, T., Li, J., Huang, S., Wen, H., Li, H., Chen, J., & Jiang, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.123648 · Cited by 18
Zhao, B., McCutcheon, C. J., Jin, K., Lyadov, I., Zervoudakis, A. J., Bates, F. S., & Ellison, C. J. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01634 · Cited by 18
Czerniecka‐Kubicka, A., Zarzyka, I., & Pyda, M. (2020) · Molecules · doi:10.3390/molecules25173810 · Cited by 18
Hong, S.-J., Kim, G. R., Kim, N., Shin, J., & Kim, Y. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02147 · Cited by 17
Zhang, Z., Zhang, J., Cao, W., Liu, X., Gong, L., Zhang, X., Chen, W., & Bao, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137267 · Cited by 17
Linghu, C., Xie, L., Yang, L., Li, X., Yao, T., Xu, Y., & Luo, Z. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52234 · Cited by 15
Malagutti, L., Charlon, S., Mazzanti, V., & Mollica, F. (2023) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2023.117961 · Cited by 16
Crystallinity-Independent Toughness in Renewable Poly( l -lactide) Triblock Plastics
Krajovic, D. M., Haugstad, G. D., & Hillmyer, M. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02580 · Cited by 17
Wang, B., Liu, H., Ying, J., Liu, C., Shen, C., & Wang, Y. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2806-1 · Cited by 17
Zhang, Z., Wan, X., Fan, B., Ma, Y., & Yang, B. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c06160 · Cited by 15
Zhang, Z., Cui, S., Ma, R., Ye, Q., Sun, J., Wang, Y., Liu, C., & Wang, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126220 · Cited by 15
Recent Progress in 5D Printing: Processes, Materials, Applications, and Future Trends
Kumar, M., Singh, J., Arora, G., Kumar, R., Rangappa, S. M., & Siengchin, S. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202501337 · Cited by 18
“A low glass transition temperature (approximately 60 ◦ C) could hinder its high-temperature applications [ 59, 60 ], even for packaging applications.”
Niu, D., Xu, P., Li, J., Yang, W., Liu, T. X., & Ma, P. (2022) · Polymer · doi:10.1016/j.polymer.2022.125532 · Cited by 14
Shear yielding and crazing in dry and wet amorphous PLA at body temperature
Chen, H., Pan, Z., Yuan, D., Sulley, G. S., Oosterbeek, R. N., Williams, C. K., & Brassart, L. (2023) · Polymer · doi:10.1016/j.polymer.2023.126477 · Cited by 15
Shahnooshi, M., Javadi, A., Nazockdast, H., Ottermann, K., & Altstädt, V. (2020) · Polymer · doi:10.1016/j.polymer.2020.123040 · Cited by 14
CRYSTALLIZATION AND THERMAL PROPERTIES
Fambri, L., & Migliaresi, C. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch8 · Cited by 21
Liu, P., Zhang, Q., Wu, H. K., Guo, S., & Qiu, J. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c01868 · Cited by 14
Jia, D., Ma, G.-Q., Liu, Q., Zhang, J., Li, J., Lin, H., Li, X., Zhong, G., & Li, Z. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00188 · Cited by 13
Significantly enhanced crystallization of polylactide Ingeo 4032D by polyethylene ionomer
Li, T., Gao, Y., Sun, X., Tang, Y. J., & Fu, Q. (2023) · Polymer · doi:10.1016/j.polymer.2023.126557 · Cited by 12
Toughening of poly(lactide acid) with low crystallinity through biaxial poststretching
Zhou, H., Song, Z., & Cai, S. (2020) · Journal of Polymer Science · doi:10.1002/pol.20200526 · Cited by 13
Li, G., Hao, M., Chen, Y., Li, H., & Lin, J. (2022) · Polymer Composites · doi:10.1002/pc.26572 · Cited by 13
Zhao, J., He, H., & Zhu, Z. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c04359 · Cited by 13
Miranda-Pinzon, M., Gómez-Caturla, J., Martínez, J. I., Guijarro, N., Marset, X., & Balart, R. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c01601 · Cited by 12
Si, R., Zhou, Q., Zhao, X., Shen, J., Wang, L., & Yu, H. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.146618 · Cited by 12
Kaptan, A. (2025) · Polymers · doi:10.3390/polym17121637 · Cited by 14
“These characteristics make PLA susceptible to catastrophic failure under dynamic or tensile loads, especially in low-temperature or chemically aggressive conditions [64].”
Cheng, S., Kogut, D., Zheng, J., Patil, S., Yang, F., & Lu, W. (2024) · The Journal of Chemical Physics · doi:10.1063/5.0189762 · Cited by 13
Wang, W., Luo, J., Wang, X., & Wang, Z. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00485 · Cited by 11
Mechanical robust and recyclable PLA-based polyurethane elastomers for flexible electronics
Wang, C., Ma, K., Wang, X.-X., Chen, K., & Qiao, S. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.167855 · Cited by 20
Guo, N., Zhao, M., Li, S., Hao, J., Wu, Z., & Zhang, C. (2022) · Polymers · doi:10.3390/polym14030645 · Cited by 10
“The improved crystallization of the PLLA matrix due to the addition of mHA1–3 could be mainly attributed to the synergistic effect of mHA1–3 as the nucleating agent and stereocomplex crystals are nucleating site This synergistic effect promoted a higher nucleation density and a smaller spherulite size in the composite…”
BackgroundEl‐Taweel, S. H., & Fathy, R. (2022) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2022.2098656 · Cited by 11
Study on the structure and properties of choline chloride toughened polylactide composites
Wang, S., Li, Z., Wang, H., Yuan, C., Liu, K., Yuan, M., & Wang, Y. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04499-2 · Cited by 10
Self-citationGuseva, D. V., Glagolev, M. K., Lazutin, A. А., & Vasilevskaya, V. V. (2023) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2023.2174136 · Cited by 10
Jariyasakoolroj, P., Makyarm, K., Klairasamee, K., Sane, A., & Jarupan, L. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53915 · Cited by 10
Guo, Z., Song, W., Wei, X., Yu, F., Song, Y., Guo, Z., Cheng, W., Miao, W., Cheng, B. H., & Song, S. (2023) · e-Polymers · doi:10.1515/epoly-2023-0026 · Cited by 13
Coote, J. P., Zhao, B., McCutcheon, C. J., Larson, M. C., Lyadov, I., Bates, F. S., & Ellison, C. J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00670 · Cited by 11
Smith, T., Feng, J., Zou, L., Gao, M., Prévôt, M. E., & Wang, S. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200293 · Cited by 10
Self-citationPark, S. B., Lee, Y. J., Ku, K. H., & Kim, B. J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51488 · Cited by 9
Tian, N., Li, Y., Gan, H., Ning, Z., Jiang, N., & Gan, Z. (2024) · Chinese Journal of Polymer Science · doi:10.1007/s10118-024-3229-y · Cited by 11
Tiptipakorn, S., Chaipakdee, N., Rimdusit, S., Hemvichian, K., & Lertsarawut, P. (2024) · Polymers · doi:10.3390/polym16233391 · Cited by 9
Xie, J. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03618-5 · Cited by 8
Metadata
- Authors
- Razavi, M., & Wang, S.-Q.
- Affiliations
- University of Akron (US)
- Corresponding author
- Wang, Shi-Qing
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-12
- Volume
- 52
- Issue
- 14
- Pages
- 5429-5441
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2958227840
- Cited by
- 212
- References
- 74
- Citations by year
- 2026: 29 · 2025: 45 · 2024: 28 · 2023: 41 · 2022: 34 · 2021: 21 · 2020: 12 · 2019: 2
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Macromolecules (publishedVersion)
- Funders
- Division of Materials Research (DMR-1609977)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polylactic acid, crystalline polymers, brittleness, ductility, spherulitic crystals, nanocrystals, melt stretching, chain entanglement, intermolecular crosslinking, toughening, thermal stability, semicrystalline polymers, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.