The DOI matches its Crossref record; 73 of the 74 references it cites were found in a registry or an index.
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Abstract
This work shows that the environmental-friendly biorenewable and biodegradable poly(lactic acid) (PLLA) can be made to have superior mechanical and thermal characteristics and thus show promise to replace conventional petroleum-based polymers such as polyethylene terephthalate. Using time-resolved polarized optical microscopy (POM), we have investigated how and why conventional crystallization tends to cause deterioration of ductility in semicrystalline PLLA. Specifically, the POM study based on partially crystallized PLLA samples promotes the idea that the spherulitic crystals are mechanically weaker than glassy noncrystalline domains whose cohesive strength stems from the chain networking because of intermolecular uncrossability. By removing the large spherulitic crystal formation and inducing nanocrystal formation through melt-stretching of PLLA in its amorphous state, we identified a completely transparent crystalline state of PLLA that is extremely tough and resistant against heat.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
The measurement of the crystallinity of polymers by DSC
Kong, Y., & Hay, J. N. (2002) · Polymer · doi:10.1016/s0032-3861(02)00235-5 · Cited by 634
Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Tsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Ovitt, T. M., & Coates, G. W. (1999) · Journal of the American Chemical Society · doi:10.1021/ja990088k · Cited by 502
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Polymerization of l,l-Lactide Initiated by Aluminum Isopropoxide Trimer or Tetramer
Kowalski, A., Duda, A., & Penczek, S. (1998) · Macromolecules · doi:10.1021/ma971737k · Cited by 470
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Crystalline structure of annealed polylactic acid and its relation to processing
Tabi, T., Sajo, I. E., Szabo, F., Luyt, A. S., & Kovacs, J. G. (2010) · Express Polymer Letters · doi:10.3144/expresspolymlett.2010.80 · Cited by 316
Melt rheology of variable L-content poly(lactic acid)
Dorgan, J. R., Janzen, J., Clayton, M. P., Hait, S. B., & Knauss, D. M. (2005) · Journal of Rheology · doi:10.1122/1.1896957 · Cited by 273
Melt rheology of poly(lactic acid): Entanglement and chain architecture effects
Dorgan, J. R., Williams, J. S., & Lewis, D. N. (1999) · Journal of Rheology · doi:10.1122/1.551041 · Cited by 272
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Ma, H., & Okuda, J. (2005) · Macromolecules · doi:10.1021/ma048284l · Cited by 269
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C. (2010) · Macromolecules · doi:10.1021/ma9024366 · Cited by 266
Drieskens, M., Peeters, R., Mullens, J., Franco, D., Lemstra, P. J., & Hristova‐Bogaerds, D. G. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21822 · Cited by 252
Drawing and extrusion of semi-crystalline polymers
Peterlin, A. (1987) · Colloid & Polymer Science · doi:10.1007/bf01412215 · Cited by 251
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245
Polymer ultradrawability: the crucial role of α-relaxation chain mobility in the crystallites
Hu, W.-G., & Schmidt-Rohr, K. (1999) · Acta Polymerica · doi:10.1002/(sici)1521-4044(19990801)50:8<271::aid-apol271>3.0.co;2-y · Cited by 228
A Spectroscopic Analysis of Poly(lactic acid) Structure
Kang, S., Hsu, S. L., Stidham, H. D., Smith, P. B., Leugers, M. A., & Yang, X. (2001) · Macromolecules · doi:10.1021/ma0016026 · Cited by 218
Tsuji, H., Horii, F., Nakagawa, M., Ikada, Y., Odani, H., & Kitamaru, R. (1992) · Macromolecules · doi:10.1021/ma00042a011 · Cited by 202
Influence of processing parameters on the degradation of poly( L ‐lactide) during extrusion
Taubner, V., & Shishoo, R. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010321)79:12<2128::aid-app1020>3.0.co;2-# · Cited by 199
Lin, Y. H. (1987) · Macromolecules · doi:10.1021/ma00178a024 · Cited by 188
New View of Entanglements in Dense Polymer Systems
Kavassalis, T. A., & Noolandi, J. (1987) · Physical Review Letters · doi:10.1103/physrevlett.59.2674 · Cited by 181
Polymeric Materials: Structure, Properties, Applications
Ehrenstein, G. W. (2001) · Cited by 173
Cooper-White, J. J., & Mackay, M. E. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990801)37:15<1803::aid-polb5>3.0.co;2-m · Cited by 161
Processing, annealing and sterilisation of poly-l-lactide
Weir, N. A., Buchanan, F. J., Orr, J. F., Farrar, D. F., & Boyd, A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.076 · Cited by 160
Chain entanglement, mechanical properties and drawability of poly(lactide)
Grijpma, D. W., Penning, J. P., & Pennings, A. J. (1994) · Colloid & Polymer Science · doi:10.1007/bf00652375 · Cited by 158
Liu, K., Song, Y., Feng, W., Liu, N., Zhang, W., & Zhang, X. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108022h · Cited by 154
The Configurational Statistics of Random Poly(lactic acid) Chains. II. Theory
Brant, D. A., Tonelli, A. E., & Flory, P. J. (1969) · Macromolecules · doi:10.1021/ma60009a003 · Cited by 136
Zuza, E., Ugartemendia, J. M., Lopez, A., Meaurio, E., Lejardi, A., & Sarasua, J. (2008) · Polymer · doi:10.1016/j.polymer.2008.08.012 · Cited by 134
How Melt-Stretching Affects Mechanical Behavior of Polymer Glasses
Zartman, G. D., Cheng, S., Li, X., Lin, F., Becker, M. L., & Wang, S. (2012) · Macromolecules · doi:10.1021/ma300955h · Cited by 121
Self-citationCavitation‐Induced Stress Whitening in Semi‐Crystalline Polymers
Lu, Y., & Men, Y. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800203 · Cited by 121
Synchrotron Ultrasmall-Angle X-ray Scattering Studies on Tensile Deformation of Poly(1-butene)
Men, Y., Rieger, J., & Homeyer, J. (2004) · Macromolecules · doi:10.1021/ma048274k · Cited by 116
A phenomenological molecular model for yielding and brittle-ductile transition of polymer glasses
Wang, S., Cheng, S., Lin, P., & Li, X. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4893765 · Cited by 113
Self-citationThe Configurational Statistics of Random Poly(lactic acid) Chains. I. Experimental Results
Tonelli, A. E., & Flory, P. J. (1969) · Macromolecules · doi:10.1021/ma60009a002 · Cited by 109
Secondary relaxation, brittle–ductile transition temperature, and chain structure
Wu, S. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070460408 · Cited by 106
Iannace, S., Maffezzoli, A., Leo, G., & Nicolais, L. (2001) · Polymer · doi:10.1016/s0032-3861(00)00744-8 · Cited by 98
WAXS study of the structural reorganization of semi-crystalline polylactide under tensile drawing
Stoclet, G., Séguéla, R., Vanmansart, C., Rochas, C., & Lefebvre, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.11.063 · Cited by 96
In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing
Stoclet, G., Lefebvre, J. M., Séguéla, R., & Vanmansart, C. (2014) · Polymer · doi:10.1016/j.polymer.2014.02.010 · Cited by 94
Jalabert, M., Fraschini, C., & Prud'homme, R. E. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21960 · Cited by 93
Razavi, M., Asadi, V., Mehdijabbar, P., Khonakdar, H. A., & Jafari, S. H. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.09.064 · Cited by 77
Self-citationCold Drawing of Glassy Polystyrene under Dead Load
Ender, D. H., & Andrews, R. D. (1965) · Journal of Applied Physics · doi:10.1063/1.1702927 · Cited by 72
Ren, J., Urakawa, O., & Adachi, K. (2002) · Macromolecules · doi:10.1021/ma0212341 · Cited by 70
Stoclet, G., Séguéla, R., Lefebvre, J., Li, S., & Vert, M. (2011) · Macromolecules · doi:10.1021/ma200469t · Cited by 66
Aghjeh, M. R., Nazari, M., Khonakdar, H., Jafari, S., Wagenknecht, U., & Heinrich, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.081 · Cited by 64
Analysis of the Film-stacking Processing Parameters for PLLA/Flax Fiber Biocomposites
Ouagne, P., Bizet, L., Baley, C., & Bréard, J. (2009) · Journal of Composite Materials · doi:10.1177/0021998309349019 · Cited by 64
Novel Properties of PLA Fibers
Dugan, J. S. (2001) · International Nonwovens Journal · doi:10.1177/1558925001os-01000308 · Cited by 62
Nonlinear Polymer Rheology: Macroscopic Phenomenology and Molecular Foundation
Wang, S. (2018) · Cited by 57
Self-citationZhu, X., & Wang, S. (2012) · Journal of Rheology · doi:10.1122/1.4764081 · Cited by 50
Self-citationDirect observation of the deformation of isolated huge spherulites in isotactic polypropylene
Nitta, K., & Takayanagi, M. (2003) · Journal of Materials Science · doi:10.1023/b:jmsc.0000004410.56145.f1 · Cited by 50
On Chain Statistics and Entanglement of Flexible Linear Polymer Melts
Wang, S. (2007) · Macromolecules · doi:10.1021/ma0712549 · Cited by 45
Self-citationHelical Jump Motions of Poly( l -Lactic Acid) Chains in the α Phase As Revealed by Solid-State NMR
Chen, W., Reichert, D., & Miyoshi, T. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b00694 · Cited by 43
Razavi, M., Kazerouni, Y., Otadi, M., Khonakdar, H. A., Jafari, S. H., Ebadi‐Dehaghani, H., & Mousavi, S. H. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.10.036 · Cited by 32
Self-citationGürarslan, A., Joijode, A. S., & Tonelli, A. E. (2012) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23074 · Cited by 26
Diffuse versus point entanglements ? homopolymers and blends
Heymans, N. (1986) · Journal of Materials Science · doi:10.1007/bf00547926 · Cited by 24
Improving Poly(ethylene terephthalate) Through Self‐nucleation
Joijode, A. S., Hawkins, K., & Tonelli, A. E. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200398 · Cited by 20
Reorganizing Polymer Chains with Cyclodextrins
Gürarslan, A., Joijode, A. S., Shen, J., Narayanan, G., Antony, G. J., Li, S., Çaydamlı, Y., & Tonelli, A. E. (2017) · Polymers · doi:10.3390/polym9120673 · Cited by 15
Texture development in uniaxially drawn polyethylene tape
Gerrits, N. S. J. A., & Young, R. J. (1991) · Journal of Materials Science · doi:10.1007/bf00549180 · Cited by 14
Arnal (2000) · doi:10.1002/1521-3935(20001101)201:17 · Cited by 8
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Perego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
Research works printed but not linked: 6
- Auras R. A., 2011, Poly(lactic acid): Synthesis, Structures, Properties, Processing, and Applications, 10
- 10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i · doi:10.1002/1521-3935(20001101)201:17<2432::aid-macp2432>3.0.co;2-i
- 10.1122/1.1896957 · DOI · Paper page
- Rault J., 1985, C. R. Acad. Sci., Ser. II: Mec., Phys., Chim., Sci. Terre Univers, 300, 433
- Wang S. Q., 2016, Polymer Glasses
- Gruenwald G., 1960, Mod. Plast., 38, 137
Cited by
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Ranakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R. A., & El-Khatib, S. (2022) · Materials · doi:10.3390/ma15124312 · Cited by 311
Sustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
Rahmatabadi, D., Khajepour, M., Bayati, A., Mirasadi, K., Amin Yousefi, M., Shegeft, A., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., et al. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113289 · Cited by 223
Xu, S., Zhou, J., & Pan, P. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101676 · Cited by 166
Metadata
- Authors
- Razavi, M., & Wang, S.-Q.
- Affiliations
- University of Akron (US)
- Corresponding author
- Wang, Shi-Qing
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-12
- Volume
- 52
- Issue
- 14
- Pages
- 5429-5441
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2958227840
- Cited by
- 212
- References
- 74
- Citations by year
- 2026: 29 · 2025: 45 · 2024: 28 · 2023: 41 · 2022: 34 · 2021: 21 · 2020: 12 · 2019: 2
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Macromolecules (publishedVersion)
- Funders
- Division of Materials Research (DMR-1609977)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polylactic acid, crystalline polymers, brittleness, ductility, spherulitic crystals, nanocrystals, melt stretching, chain entanglement, intermolecular crosslinking, toughening, thermal stability, semicrystalline polymers, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.