A 3D Printable Electroconductive Biocomposite Bioink Based on Silk Fibroin-Conjugated Graphene Oxide
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Reduced graphene oxide (rGO) has wide application as a nanofiller in the fabrication of electroconductive biocomposites due to its exceptional properties. However, the hydrophobicity and chemical stability of rGO limit its ability to be incorporated into precursor polymers for physical mixing during biocomposite fabrication. Moreover, until now, no suitable rGO-combining biomaterials that are stable, soluble, biocompatible, and 3D printable have been developed. In this study, we fabricated digital light processing (DLP) printable bioink (SGOB1), through covalent reduction of graphene oxide (GO) by glycidyl methacrylated silk fibroin (SB). Compositional analyses showed that SGOB1 contains approximately 8.42% GO in its reduced state. Our results also showed that the rGO content of SGOB1 became more thermally stable and highly soluble. SGOB1 hydrogels demonstrated superior mechanical, electroconductive, and neurogenic properties than (SB). Furthermore, the photocurable bioink supported Neuro2a cell proliferation and viability. Therefore, SGOB1 could be a suitable biocomposite for neural tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structures, mechanical properties and applications of silk fibroin materials
Koh, L.-D., Cheng, Y., Teng, C.-P., Khin, Y.-W., Loh, X.-J., Tee, S.-Y., Low, M., Ye, E., Yu, H.-D., Zhang, Y.-W., et al. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.001 · Cited by 1,241
Considerations for the use of SH-SY5Y neuroblastoma cells in neurobiology
Kovalevich, J., & Langford, D. (2013) · Methods in molecular biology · doi:10.1007/978-1-62703-640-5_2 · Cited by 1,005
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Tissue–electronics interfaces: from implantable devices to engineered tissues
Feiner, R., & Dvir, T. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.76 · Cited by 595
Cheung, Y.-T., Lau, W. K.-W., Yu, M.-S., Lai, C. S.-W., Yeung, S.-C., So, K.-F., & Chang, R. C.-C. (2009) · NeuroToxicology · doi:10.1016/j.neuro.2008.11.001 · Cited by 576
Cited by
Silk fibroin as a functional biomaterial for tissue engineering
Sun, W., Gregory, D. A., Tomeh, M. A., & Zhao, X. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031499 · Cited by 552
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
Self-citationTan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00313 · Cited by 36
Silk based bio-inks for medical applications
Anant Deshpande, V., Antanitta. S, V., Kore, A., & Kandasubramanian, B. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112255 · Cited by 23
Silk fibroin methacrylation: chemical synthesis to biomechanical optimization in tissue engineering
Wu, C. A., Zhu, Y., & Woo, Y. J. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01931 · Cited by 17
Metadata
- Authors
- Ajiteru, O., Sultan, M. T., Lee, Y. J., Seo, Y. B., Hong, H., Lee, J. S., Lee, H., Suh, Y. J., Ju, H. W., Lee, O. J., Park, H. S., Jang, M., Kim, S. H., & Park, C. H.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-14
- Volume
- 20
- Issue
- 9
- Pages
- 6873-6883
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W3049499624
- Cited by
- 86
- References
- 5
- FWCI
- 3.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 3D Printable Electroconductive Biocomposite Bioink Based on Silk Fibroin-Conjugated Graphene Oxide. https://app.cochat.ai/papers/10.1021/acs.nanolett.0c02986
- The paper
- Ajiteru, O., Sultan, M. T., Lee, Y. J., Seo, Y. B., Hong, H., Lee, J. S., Lee, H., Suh, Y. J., Ju, H. W., Lee, O. J., Park, H. S., Jang, M., Kim, S. H., & Park, C. H. (2020). A 3D Printable Electroconductive Biocomposite Bioink Based on Silk Fibroin-Conjugated Graphene Oxide. Nano Letters. https://doi.org/10.1021/acs.nanolett.0c02986
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.