The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Abstract
Although the rechargeable lithium-sulfur battery system has attracted significant attention due to its high theoretical specific energy, its implementation has been impeded by multiple challenges, especially the dissolution of intermediate lithium polysulfide (Li2Sn) species into the electrolyte. Introducing anchoring materials, which can induce strong binding interaction with Li2Sn species, has been demonstrated as an effective way to overcome this problem and achieve long-term cycling stability and high-rate performance. The interaction between Li2Sn species and anchoring materials should be studied at the atomic level in order to understand the mechanism behind the anchoring effect and to identify ideal anchoring materials to further improve the performance of Li-S batteries. Using first-principles approach with van der Waals interaction included, we systematically investigate the adsorption of Li2Sn species on various two-dimensional layered materials (oxides, sulfides, and chlorides) and study the detailed interaction and electronic structure, including binding strength, configuration distortion, and charge transfer. We gain insight into how van der Waals interaction and chemical binding contribute to the adsorption of Li2Sn species for anchoring materials with strong, medium, and weak interactions. We understand why the anchoring materials can avoid the detachment of Li2S as in carbon substrate, and we discover that too strong binding strength can cause decomposition of Li2Sn species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
A fast and robust algorithm for Bader decomposition of charge density
Henkelman, G., Arnaldsson, A., & Jónsson, H. (2006) · Computational Materials Science · doi:10.1016/j.commatsci.2005.04.010 · Cited by 10,723
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Ab initio molecular dynamics for open-shell transition metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.48.13115 · Cited by 8,359
A grid-based Bader analysis algorithm without lattice bias
Tang, W., Sanville, E., & Henkelman, G. (2009) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/21/8/084204 · Cited by 7,585
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Chemical accuracy for the van der Waals density functional
Klimeš, J., Bowler, D. R., & Michaelides, A. (2010) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/22/2/022201 · Cited by 3,587
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Higher-accuracy van der Waals density functional
Lee, K., Murray, É. D., Kong, L., Lundqvist, B. I., & Langreth, D. C. (2010) · Physical Review B · doi:10.1103/physrevb.82.081101 · Cited by 2,755
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Self-citationJi, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Self-citationPorous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Self-citationSulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Self-citationLi, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
Self-citationCathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Self-citationYao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Self-citationChiang, Y.-M. (2010) · Science · doi:10.1126/science.1198591 · Cited by 504
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Self-citationNew insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
Zhao, K., Wang, W. L., Gregoire, J., Pharr, M., Suo, Z., Vlassak, J. J., & Kaxiras, E. (2011) · Nano Letters · doi:10.1021/nl201501s · Cited by 342
Jung, D. S., Hwang, T. H., Lee, J. H., Koo, H. Y., Shakoor, R. A., Kahraman, R., Jo, Y. N., Park, M., & Choi, J. W. (2014) · Nano Letters · doi:10.1021/nl501383g · Cited by 247
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Song, M.-S., Han, S.-C., Kim, H.-S., Kim, J.-H., Kim, K.-T., Kang, Y.-M., Ahn, H.-J., Dou, S. X., & Lee, J.-Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710895 · Cited by 218
Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell
Choi, Y. J., Jung, B. S., Lee, D. J., Jeong, J. H., Kim, K. W., Ahn, H. J., Cho, K. K., & Gu, H. B. (2007) · Physica Scripta · doi:10.1088/0031-8949/2007/t129/014 · Cited by 195
High-capacity Li2S–graphene oxide composite cathodes with stable cycling performance
Seh, Z. W., Wang, H., Liu, N., Zheng, G. W., Li, W., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc52789a · Cited by 116
Self-citation
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationAdvances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationCatalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationSun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Metadata
- Authors
- Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-15
- Volume
- 15
- Issue
- 6
- Pages
- 3780-3786
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2182696701
- Cited by
- 931
- References
- 43
- FWCI
- 43.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.