The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life
Abstract
High energy and power densities are the greatest challenge for all-solid-state lithium batteries due to the poor interfacial compatibility between electrodes and electrolytes as well as low lithium ion transfer kinetics in solid materials. Intimate contact at the cathode–solid electrolyte interface and high ionic conductivity of solid electrolyte are crucial to realizing high-performance all-solid-state lithium batteries. Here, we report a general interfacial architecture, i.e., Li 7 P 3 S 11 electrolyte particles anchored on cobalt sulfide nanosheets, by an in situ liquid-phase approach. The anchored Li 7 P 3 S 11 electrolyte particle size is around 10 nm, which is the smallest sulfide electrolyte particles reported to date, leading to an increased contact area and intimate contact interface between electrolyte and active materials. The neat Li 7 P 3 S 11 electrolyte synthesized by the same liquid-phase approach exhibits a very high ionic conductivity of 1.5 × 10 –3 S cm –1 with a particle size of 0.4–1.0 μm. All-solid-state lithium batteries employing cobalt sulfide–Li 7 P 3 S 11 nanocomposites in combination with the neat Li 7 P 3 S 11 electrolyte and Super P as the cathode and lithium metal as the anode exhibit excellent rate capability and cycling stability, showing reversible discharge capacity of 421 mAh g –1 at 1.27 mA cm –2 after 1000 cycles. Moreover, the obtained all-solid-state lithium batteries possesses very high energy and power densities, exhibiting 360 Wh kg –1 and 3823 W kg –1 at current densities of 0.13 and 12.73 mA cm –2, respectively. This contribution demonstrates a new interfacial design for all-solid-state battery with high performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Visualization and Quantification of Electrochemical and Mechanical Degradation in Li Ion Batteries
Ebner, M., Marone, F., Stampanoni, M., & Wood, V. (2013) · Science · doi:10.1126/science.1241882 · Cited by 695
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Capacity fade study of lithium-ion batteries cycled at high discharge rates
Ning, G., Haran, B., & Popov, B. N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00029-6 · Cited by 614
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Tatsumisago, M., Nagao, M., & Hayashi, A. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.03.005 · Cited by 471
Hu, Y.-S. (2016) · Nature Energy · doi:10.1038/nenergy.2016.42 · Cited by 440
Self-citationAn Iodide-Based Li7P2S8I Superionic Conductor
Rangasamy, E., Liu, Z., Gobet, M., Pilar, K., Sahu, G., Zhou, W., Wu, H., Greenbaum, S., & Liang, C. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508723m · Cited by 350
Zhou, Y., Yan, D., Xu, H., Feng, J., Jiang, X., Yue, J., Yang, J., & Qian, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.019 · Cited by 333
Solution‐Processable Glass LiI‐Li4SnS4 Superionic Conductors for All‐Solid‐State Li‐Ion Batteries
Park, K. H., Oh, D. Y., Choi, Y. E., Nam, Y. J., Han, L., Kim, J., Xin, H. L., Lin, F., Oh, S. M., & Jung, Y. S. (2015) · Advanced Materials · doi:10.1002/adma.201505008 · Cited by 321
Jiang, J., Zhu, J., Ai, W., Wang, X., Wang, Y., Zou, C., Huang, W., & Yu, T. (2015) · Nature Communications · doi:10.1038/ncomms9622 · Cited by 281
Morphological control of particles
Adair, J. H., & Suvacı, E. (2000) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(00)00049-2 · Cited by 156
Electrochemical stiffness in lithium-ion batteries
Tavassol, H., Jones, E. M. C., Sottos, N. R., & Gewirth, A. A. (2016) · Nature Materials · doi:10.1038/nmat4708 · Cited by 154
Shi, W., Zhu, J., Rui, X., Cao, X., Chen, C., Zhang, H., Hng, H. H., & Yan, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3003654 · Cited by 144
Motavalli, J. (2015) · Nature · doi:10.1038/526s96a · Cited by 90
Aso, K., Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302164e · Cited by 70
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Self-citation
Metadata
- Authors
- Yao, X., Liu, D., Wang, C., Long, P., Peng, G., Hu, Y.-S., Li, H., Chen, L., & Xu, X.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-10-24
- Volume
- 16
- Issue
- 11
- Pages
- 7148-7154
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2535464862
- Cited by
- 360
- References
- 28
- FWCI
- 21.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.