Nanocomposite Bioinks Based on Agarose and 2D Nanosilicates with Tunable Flow Properties and Bioactivity for 3D Bioprinting
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Three-dimensional (3D) bioprinting enables the controlled fabrication of complex constructs for tissue engineering applications and has been actively explored in recent years. However, its progress has been limited by the existing difficulties in the development of bioinks with suitable biocompatibility and mechanical properties and at the same time adaptability to the process. Herein, we describe the engineering of a nanocomposite agarose bioink with tailored properties using 2D nanosilicate additives. The suitability of agarose for 3D bioprinting has been debated due to its bioinert nature and compatibility with extrusion-based bioprinting. Nanosilicates were used to tailor the flow behavior of agarose solutions, and detailed rheological characterization of different bioink formulations was performed to elucidate the effect of nanosilicates on the flow behavior and gelation of agarose bioinks. The proper selection of nanosilicate concentration resulted in extrusion 3D printed structures with high shape fidelity and structural integrity. Moreover, the influence of addition of nanosilicates on the bioactivity of agarose was studied, and nanocomposite bioinks showed significant improvement in metabolic activity of encapsulated cells. The bioactivity of the nanocomposite bioinks was also evaluated through a cell spreading assay; the charged surfaces of nanosilicates resulted in full spreading and elongation of fibroblasts, and the extent of change in morphology of cells was found to be directly correlated with the nanosilicate concentration. Our findings suggested that engineered agarose-nanosilicate bioinks can be exploited as a new generation of hydrogel bioinks for extrusion 3D bioprinting with tunable flow properties and bioactivity.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [29]
Citations
Cites
Edmondson, R., Broglie, J. J., Adcock, A. F., & Yang, L. (2014) · ASSAY and Drug Development Technologies · doi:10.1089/adt.2014.573 · Cited by 2,515
Visualizing Spatiotemporal Dynamics of Multicellular Cell-Cycle Progression
Sakaue-Sawano, A., Kurokawa, H., Morimura, T., Hanyu, A., Hama, H., Osawa, H., Kashiwagi, S., Fukami, K., Miyata, T., Miyoshi, H., et al. (2008) · Cell · doi:10.1016/j.cell.2007.12.033 · Cited by 2,173
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Three-Dimensional Cell Culture: A Breakthrough in Vivo
Antoni, D., Burckel, H., Josset, E., & Noel, G. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16035517 · Cited by 990
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Hydrogel-Forming Algae Polysaccharides: From Seaweed to Biomedical Applications
Beaumont, M., Tran, R., Vera, G., Niedrist, D., Rousset, A., Pierre, R., Shastri, V. P., & Forget, A. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01406 · Cited by 320
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Engineering bioinks for 3D bioprinting
Decante, G., Costa, J. B., Silva-Correia, J., Collins, M. N., Reis, R. L., & Oliveira, J. M. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2c · Cited by 237
“27 1605352 [94] Nadernezhad A, Caliskan O S, Topuz F, Afghah F, Erman B and Koc B 2019 Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting ACS Appl.”
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Hydrogels and Nanogels: Pioneering the Future of Advanced Drug Delivery Systems
Delgado-Pujol, E. J., Martínez, G., Casado-Jurado, D., Vázquez, J., León-Barberena, J., Rodríguez-Lucena, D., Torres, Y., Alcudia, A., & Begines, B. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17020215 · Cited by 216
“Applications Ref.”
Copolymer/Clay Nanocomposites for Biomedical Applications
Murugesan, S., & Scheibel, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908101 · Cited by 214
Malekpour, A., & Chen, X. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020040 · Cited by 206
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Recent advances in 3D printing of tough hydrogels: A review
Zhang, X. N., Zheng, Q., & Wu, Z. L. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109895 · Cited by 183
Hydrogel‐Based 3D Bioprinting for Bone and Cartilage Tissue Engineering
Abdollahiyan, P., Oroojalian, F., Mokhtarzadeh, A., & de la Guardia, M. (2020) · Biotechnology Journal · doi:10.1002/biot.202000095 · Cited by 158
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
Bercea, M. (2023) · Molecules · doi:10.3390/molecules28062766 · Cited by 163
Levi, S., Yen, F.-C., Baruch, L., & Machluf, M. (2022) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2022.05.011 · Cited by 136
Afghah, F., Altunbek, M., Dikyol, C., & Koç, B. (2020) · Scientific Reports · doi:10.1038/s41598-020-61606-x · Cited by 137
Self-citationMultifunctional Hydrogel Nanocomposites for Biomedical Applications
Barrett-Catton, E., Ross, M. L., & Asuri, P. (2021) · Polymers · doi:10.3390/polym13060856 · Cited by 118
“The chemical properties of hydrogels such as sensitivity to stimuli and bioactivity are an integral aspect of their applicability for biomedical use [6,21,33,45,62].”
BackgroundMethodInfluentialCell-Laden Nanocomposite Bioinks for 3D Bioprinting
Cai, Y., Chang, S. Y., Gan, S. W., Ma, S., Lu, W. F., & Yen, C. C. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.014 · Cited by 114
Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 107
Sustainable and safer nanoclay composites for multifaceted applications
Padil, V. V. T., Kumar, K. P. A., Murugesan, S., Torres–Mendieta, R., Wacławek, S., Cheong, J. Y., Černík, M., & Varma, R. S. (2022) · Green Chemistry · doi:10.1039/d1gc03949k · Cited by 102
Chakraborty, A., Roy, A., Ravi, S. P., & Paul, A. (2021) · Biomaterials Science · doi:10.1039/d1bm00605c · Cited by 102
Clay-Based Nanocomposite Hydrogels for Biomedical Applications: A Review
Tipa, C., Cidade, M. T., Borges, J. P., Costa, L. C., Silva, J. A. M. D. C., & Soares, P. I. P. (2022) · Nanomaterials · doi:10.3390/nano12193308 · Cited by 98
“Furthermore, the use of nanofillers can significantly change the physiochemical properties of hydrogels, thus enabling their use in 3D bioprinting (Figure 9) [55].”
BackgroundDas, S., Jegadeesan, J. T., & Basu, B. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.3c01271 · Cited by 115
Man, K., Barroso, I. A., Brunet, M. Y., Peacock, B., Federici, A., Hoey, D. A., & Cox, S. C. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020832 · Cited by 94
“The use of nanosilicates has emerged as a promising additive to effectively enhance the physical and biological functionality of biomaterials [44,45].”
BackgroundShi, Z., Zhong, Q., Chen, Y., Gao, J., Pan, X., Lian, Q., Chen, R., Wang, P., Wang, J., Shi, Z., et al. (2021) · International Journal of Nanomedicine · doi:10.2147/ijn.s321387 · Cited by 89
“Apart from the osteogenic ability, synthetic SN could increase viscosity and fabricate secondary networks of the hydrogel due to its electrostatic interactions and van der Waals forces.(36,37) The nonbonding complexation will decrease the cross-linking time of UV radiation for hydrogel polymerization, which is benefic…”
BackgroundPark, S., Jung, S.-W., Heo, J., Koh, W., Lee, S., & Hong, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07385 · Cited by 78
Nanocomposite Bioprinting for Tissue Engineering Applications
Loukelis, K., Helal, Z. A., Mikos, A. G., & Chatzinikolaidou, Μ. (2023) · Gels · doi:10.3390/gels9020103 · Cited by 83
“Moreover, when laponite degrades, its different ions are released, including magnesium ions, silicic acid, and lithium ions, which have been found to affect both osteogenesis [77] and angiogenesis [78] pathways, making it a promising material for 3D bioprinting technologies [40,79].”
Afghah, F., Ullah, M., Zanjani, J. S. M., Süt, P. A., Şen, Ö., Emanet, M., Okan, B. S., Çulha, M., Menceloǵlu, Y. Z., Yıldız, M., et al. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab7417 · Cited by 74
Self-citationBiobridge: An Outlook on Translational Bioinks for 3D Bioprinting
Gu, Y., Forget, A., & Shastri, V. P. (2021) · Advanced Science · doi:10.1002/advs.202103469 · Cited by 66
Nanoclays in medicine: a new frontier of an ancient medical practice
Katti, K. S., Jasuja, H., Jaswandkar, S. V., Mohanty, S., & Katti, D. R. (2022) · Materials Advances · doi:10.1039/d2ma00528j · Cited by 65
Li, X., Zheng, F., Wang, X., Geng, X., Zhao, S., Liu, H., Dou, D., Leng, Y., Wang, L., & Yubo, F. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.649 · Cited by 84
“Although agrose hydrogels lack cell binding sites and thus have limited bioactivity[153], adding agrose into other polymers can improve print fidelity and stability of printed structure[40,79].”
BackgroundRecent Advances in the Development of Biomimetic Materials
Ciulla, M. G., Massironi, A., Sugni, M., Ensign, M. A., Marzorati, S., & Forouharshad, M. (2023) · Gels · doi:10.3390/gels9100833 · Cited by 71
“…nanocomposite shear thinning of nanocomposite bioinks for extrusion 3D bioprinting applications but also significantly improved the bioactivity of nanocomposite hydrogels with increased metabolic activity of encapsulated cells and the ability of cells to extend and change their morphology [206].”
BackgroundLatest Advances in 3D Bioprinting of Cardiac Tissues
Jafari, A., Ajji, Z., Mousavi, A., Naghieh, S., Bencherif, S. A., & Savoji, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101636 · Cited by 63
Current advancements in bio-ink technology for cartilage and bone tissue engineering
Badhe, R. V., Chatterjee, A., Bijukumar, D. R., & Mathew, M. T. (2023) · Bone · doi:10.1016/j.bone.2023.116746 · Cited by 47
Sekar, M. P., Budharaju, H., Sethuraman, S., & Sundaramurthi, D. (2023) · SLAS TECHNOLOGY · doi:10.1016/j.slast.2023.04.005 · Cited by 46
Biologically Enhanced Starch Bio‐Ink for Promoting 3D Cell Growth
Zhuang, P., Greenberg, Z., & He, M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100551 · Cited by 44
Biomacromolecules for Tissue Engineering: Emerging Biomimetic Strategies
Guo, J. L., Kim, Y. S., & Mikos, A. G. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00792 · Cited by 43
Elastic Agarose Nanowire Aerogels for Oil–Water Separation and Thermal Insulation
Yang, X. L., Jiang, P., Xiao, R., Fu, R., Miao, C., Wen, L., Song, Q., Liu, Y., Yu, H., Gu, J., et al. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c01625 · Cited by 32
Hydrogel-Colloid Composite Bioinks for Targeted Tissue-Printing
Michel, R., & Auzély‐Velty, R. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00305 · Cited by 34
Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 36
Chakraborty, P. K., Azadmanjiri, J., Pavithra, C., Wang, X., Masood, S. H., Dey, S. R., & Wang, J. (2020) · Small · doi:10.1002/smll.202004900 · Cited by 30
Cernencu, A. I., Dinu, A. I., Stancu, I., Lungu, A., & Iovu, H. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.28020 · Cited by 30
“In addition, this 2D nano‐filler enhanced the attachment and metabolic activity of cells, transforming a biologically inert substrate (agarose) in a bioactive nanocomposite scaffold (Nadernezhad et al., 2019).”
Multiscale embedded printing of engineered human tissue and organ equivalents
Zhang, C., Hua, W., Mitchell, K., Raymond, L., Delzendehrooy, F., Wen, L., Do, C., Chen, J., Yang, Y., Linke, G., et al. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2313464121 · Cited by 29
“From the material perspective, all materials used in this work, including the GelMA bioink and the nanoclay - Pluronic F127 nanocomposite, exhibit excellent biocompatibility (75–77), making the MSEP strategy promising for cell printing applications.”
Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Photo-crosslinkable chitosan and gelatin-based nanohybrid bioinks for extrusion-based 3D-bioprinting
Yüce, E., Tutar, R., İzbudak, B., Alarçın, E., Kocaağa, B., Güner, F. S., Emik, S., & Bal‐Öztürk, A. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1981322 · Cited by 26
“Furthermore, the implementation of LDH in polymer matrix improves the printability and the mechanical properties of the scaffolds([19,20]).”
BackgroundShi, J., Zhang, R., Zhou, J., Yim, W., Jokerst, J. V., Zhang, Y., Mansel, B. W., Yang, N., Zhang, Y., & Ma, J. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.2c00013 · Cited by 25
A Comprehensive Assessment on the Pivotal Role of Hydrogels in Scaffold-Based Bioprinting
Ratnamani, M. P. C., Zhang, X., & Wang, H. (2022) · Gels · doi:10.3390/gels8040239 · Cited by 29
“The incorporation of nanomaterials such as Laponite can improve both the flow behavior and the biological functions of agarose [82].”
BackgroundBioprinting a cell‐laden matrix for bone regeneration: A focused review
Ghorbani, F., Li, D., Zhong, Z., Sahranavard, M., Qian, Z., Ni, S., Zhang, Z., Zamanian, A., & Yu, B. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49888 · Cited by 26
Bioinks—materials used in printing cells in designed 3D forms
Tamay, D. G., & Hasırcı, N. (2021) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2021.1892470 · Cited by 24
Kafili, G., Tamjid, E., Niknejad, H., & Simchi, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111566 · Cited by 22
Three‐Dimensional Printing Applications for Bone Tissue Engineering: A Review
Jalise, S. Z., Mehrabi, A., Habibi, S., Milan, P. B., & Rezapour, A. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70152 · Cited by 21
Building a better bone: The synergy of 2D nanomaterials and 3D printing for bone tissue engineering
Li, N., Cui, J., Chi, M., Thieringer, F. M., & Sharma, N. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112362 · Cited by 24
Laponite for biomedical applications: An ophthalmological perspective
Rodrigo, M. J., Cardiel, M. J., Fraile, J. M., Mayoral, J. A., Pablo, L. E., & García‐Martín, E. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100935 · Cited by 21
“Cell-laden Laponite-based nanocomposite bioinks demonstrated superior printing properties that enabled the creation of complex forms and the spreading of various encapsulated cells [128 – 130].”
BackgroundChoudary, R., Saini, N., Chopra, D. S., Singh, D., & Singh, N. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01078-7 · Cited by 21
“After gelation, the agarose solution shows high viscosity and shape fidelity due to which they lack binding site for cell and also shows low bioactivity [93].”
BackgroundModified Polysaccharides: Potential Biomaterials for Bioprinting
Jiang, T., Yang, Y. K., Lin, Z., Yang, H., & Luo, Z. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16090338 · Cited by 18
Hashemi, A., Ezati, M., Zumberg, I., Vičar, T., Chmelíková, L., Čmiel, V., & Provaznik, V. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109777 · Cited by 19
3D bioprinting of cell-laden thermosensitive methylcellulose/nanosilicate composite hydrogels
Choi, Y. H., Yeo, Y. H., Lee, D., Park, S. A., & Park, W. H. (2023) · Cellulose · doi:10.1007/s10570-023-05209-5 · Cited by 12
“Thus, although various biomaterials, including hyaluronic acid, collagen, and agarose, are used for 3D bioprinting, the lack of an ideal bioink that satisfies all the requirements, such as excellent biological stability as well as the mechanical properties essential for 3D printing, remains a major challenge (Lee et a…”
BackgroundWeitao, W. (2020) · Micro & Nano Letters · doi:10.1049/mnl.2019.0712 · Cited by 11
Functional Agarose Hydrogels Obtained by Employing Homogeneous Synthesis Strategies
Gericke, M., Witzler, M., Enkelmann, A., Schneider, G., Schulze, M., & Heinze, T. J. (2024) · Polysaccharides · doi:10.3390/polysaccharides5030014 · Cited by 9
Alheib, O., da Silva, L. P., Youn, Y. H., Kwon, I. K., Reis, R. L., & Correlo, V. M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818411-0.00016-1 · Cited by 8
Hybprinting for musculoskeletal tissue engineering
Li, J., Kim, C., Pan, C., Babian, A., Lui, E., Young, J. L., Moeinzadeh, S., Kim, S., & Yang, Y. (2022) · iScience · doi:10.1016/j.isci.2022.104229 · Cited by 10
“…tissue (tendon, ligament, cartilage) Nerves Blood vessels Polymers Agarose 20–40 kPa (Lopez- Marcial et al., 2018) 19.2–470 kPa (Guo et al., 2018; Nadernezhad et al., 2019) (Neufurth et al., 2014) (Lopez-Marcial et al., 2018) (Gu et al., 2016) (Bertassoni et al., 2014b) Alginate 50–250 kPa…”
InfluentialChallenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels
Qiu, J., Ma, S., & Qu, X. (2025) · Nano Select · doi:10.1002/nano.202400149 · Cited by 9
Particle–polymer interactions for 3D printing material design
Mitchell, K., Hua, W., Bandala, E. R., Gaharwar, A. K., & Jin, Y. (2024) · Chemical Physics Reviews · doi:10.1063/5.0179181 · Cited by 14
Vascularized Liver Tissue Embedded Bioprinting Utilizing GelMA/Nanoclay-based Composite hydrogelsPreprint
Rezaei, N. T., Dixit, K., Kumar, H., John, J., Natale, G., Park, S. S., & Kim, K. (2023) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2023.11.16.567470 · Cited by 10
Synthesis and Characterization of a Nanoclay Reinforced Gelatin‐Based Hybrid Hydrogel
Sakr, M. A., Siddiqua, S., Shin, S. R., & Kim, K. (2025) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37870 · Cited by 6
Polymer nanocomposites for biomedical applications
Islam, H., Hoque, M. E., & Santulli, C. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824492-0.00016-7 · Cited by 7
Rostamabadi, M. M., Topuz, F., Assadpour, E., Rostamabadi, H., & Jafari, S. M. (2026) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2026.112426 · Cited by 4
Self-citationMicrofluidics, organs-on-a-chip, and 3D printing
Shah, M., Prakashan, D., & Gandhi, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13782-2.00008-5 · Cited by 7
3D Bioprinting Bioinks: an up-to-date overview
Moradi, A., Khosravi, N., Khanyile, B. S., Sharifianjazi, F., & Sorkhabi, M. (2024) · Journal of Composites and Compounds · doi:10.61186/jcc.6.3.3 · Cited by 4
A review of nanoparticles in bioinks
İnci, İ., Ekşin, E., Büyüköz, M., & Yılmaz, M. (2025) · Nanotechnology · doi:10.1088/1361-6528/adf859 · Cited by 5
Perspective: 3D bioprinted skin - engineering the skin for medical applications
Vijayavenkataraman, S. (2021) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2021.100018 · Cited by 3
3D printing of bionanocomposites and their broad spectrum of applications
Kouhi, M., Sajadi-Javan, Z. S., & Abedi, N. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91764-3.00001-2 · Cited by 3
3D printed bio-based polymers and hydrogels for tissue engineering
Askari, E., & Akbari, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00003-x · Cited by 4
Scaffolds for cultivated meat: technological considerations
Levi, S., Yen, F.-C., Baruch, L., & Machluf, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18767-4.00001-9 · Cited by 3
Hashemi, A., Ezati, M., Paul, R., Zumberg, I., Bačovský, J., Fohlerová, Z., & Provazník, V. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500232 · Cited by 2
Adhesive and Hemostatic Hydrogel for the Management of Postpartum Hemorrhage
Hargett, S. E., Ingole, P., Stolyarova, A., Po, D., Moss, T. D., Sureka, J., Biswas, S., Davis, R., & Gaharwar, A. K. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c05034 · Cited by 2
Biomedical Applications of Nanosilicate Composites
Kumar, A., & Kumar, A. (2021) · Materials horizons · doi:10.1007/978-981-33-4753-3_1 · Cited by 2
Biswal, A., & Swain, S. K. (2022) · Composites science and technology · doi:10.1007/978-981-19-2332-6_2 · Cited by 2
Cell-Laden Nanocomposite Bioinks for 3D BioprintingPreprint
Cai, Y., Chang, S. Y., Gan, S. W., Ma, S., Lu, W. F., & Yen, C. C. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4095727 · Cited by 2
Polymers for 3D cell culture and tissue engineering applications
Parkar, J. N., Jain, R. D., & Dandekar, P. P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95496-9.00010-7 · Cited by 1
Natural Polysaccharide-Based Materials for Scaffolds Biofabrication
Sinduja, M. E., Mahendiran, B., Radhakrishnan, J., Arun, C., & Krishnakumar, G. S. (2024) · Springer eBooks · doi:10.1007/978-3-031-56363-8_29 · Cited by 1
Introduction to bioactive compounds: Definition, advantages, and limitations
Falsafi, S. R., Topuz, F., Aaliya, B., Demirkesen, İ., Yıldırım-Yalçın, M., & Rostamabadi, H. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-22228-3.00001-x · Cited by 1
Self-citationTeixeira, A. M., Damme, L. V., Vlierberghe, S. V., & Martins, P. A. L. D. S. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250547 · Cited by 1
3D bioprinting: overview and recent developments
Kulkarni, R., & Pandya, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90984-6.00007-6 · Cited by 1
Hybrid 3D bioprinting of functionalized structures for tissue engineering
Afghah, F. (2020) · Sabanci University
Self-citationNatural Hydrogels and 3D-Bioprinting
Fernandes, B. L., & de Souza, C. F. (2022) · Springer eBooks · doi:10.1007/978-3-030-98279-9_15
Natural Polysaccharide-Based Materials for Scaffolds Biofabrication
Sinduja, M. E., Mahendiran, B., Radhakrishnan, J., Arun, C., & Krishnakumar, G. S. (2023) · Springer eBooks · doi:10.1007/978-3-030-92090-6_29-1
Natural Polysaccharide-Based Materials for Scaffolds Biofabrication
Sinduja, M. E., Mahendiran, B., Radhakrishnan, J., Arun, C., & Krishnakumar, G. S. (2024) · Springer eBooks · doi:10.1007/978-3-030-92090-6_29-2
A simple method to assess the optimum 3D printing parameters, using agarose hydrogel
Teixeira, A. M., André, A., & Martins, P. A. L. D. S. (2026) · MRS Communications · doi:10.1557/s43579-025-00915-6
Coşkun, B., & Ünlüer, Ö. B. (2026) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbma.70034
Khoshnood, N., Frampton, J. P., Nouri, A., & Zamanian, A. (2026) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-026-00926-w
Generation of Human Bioartificial Tissues Using Agarose-Derived Biomaterials
Campos, F., Chato‐Astrain, J., Martín‐Piedra, M. Á., García‐García, Ó. D., Sánchez‐Porras, D., Etayo‐Escanilla, M., Ávila‐Fernández, P., Garzón, I. J., & Alaminos, M. (2026) · Materials · doi:10.3390/ma19173645
Metadata
- Authors
- Nadernezhad, A., Caliskan, O. S., Topuz, F., Afghah, F., Erman, B., & Koc, B.
- Affiliations
- Sabancı Üniversitesi (TR)
- Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey 34956
- Venue
- ACS Applied Bio Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-16
- Volume
- 2
- Issue
- 2
- Pages
- 796-806
- ISSN
- 2576-6422 (ISSN-L)
- OpenAlex
- W2909382813
- Cited by
- 91
- References
- 40
- Citations by year
- 2026: 6 · 2025: 9 · 2024: 11 · 2023: 15 · 2022: 21 · 2021: 16 · 2020: 12 · 2019: 1
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Bio Materials (publishedVersion)
- PubMed (publishedVersion)
- Sabanci University (submittedVersion)
- Funders
- H2020 Marie Sklodowska-Curie Actions (116C031)
- Türkiye Bilimsel ve Teknolojik Arastirma Kurumu
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- extrusion-based 3D bioprinting, flow behavior, rheology, gelation, bioactivity (biomaterials), encapsulated cells, cell spreading, fibroblasts, hydrogels, shape fidelity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.