Nanocomposite Bioinks Based on Agarose and 2D Nanosilicates with Tunable Flow Properties and Bioactivity for 3D Bioprinting
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Three-dimensional (3D) bioprinting enables the controlled fabrication of complex constructs for tissue engineering applications and has been actively explored in recent years. However, its progress has been limited by the existing difficulties in the development of bioinks with suitable biocompatibility and mechanical properties and at the same time adaptability to the process. Herein, we describe the engineering of a nanocomposite agarose bioink with tailored properties using 2D nanosilicate additives. The suitability of agarose for 3D bioprinting has been debated due to its bioinert nature and compatibility with extrusion-based bioprinting. Nanosilicates were used to tailor the flow behavior of agarose solutions, and detailed rheological characterization of different bioink formulations was performed to elucidate the effect of nanosilicates on the flow behavior and gelation of agarose bioinks. The proper selection of nanosilicate concentration resulted in extrusion 3D printed structures with high shape fidelity and structural integrity. Moreover, the influence of addition of nanosilicates on the bioactivity of agarose was studied, and nanocomposite bioinks showed significant improvement in metabolic activity of encapsulated cells. The bioactivity of the nanocomposite bioinks was also evaluated through a cell spreading assay; the charged surfaces of nanosilicates resulted in full spreading and elongation of fibroblasts, and the extent of change in morphology of cells was found to be directly correlated with the nanosilicate concentration. Our findings suggested that engineered agarose-nanosilicate bioinks can be exploited as a new generation of hydrogel bioinks for extrusion 3D bioprinting with tunable flow properties and bioactivity.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [29]
Citations
Cites
Edmondson, R., Broglie, J. J., Adcock, A. F., & Yang, L. (2014) · ASSAY and Drug Development Technologies · doi:10.1089/adt.2014.573 · Cited by 2,515
Visualizing Spatiotemporal Dynamics of Multicellular Cell-Cycle Progression
Sakaue-Sawano, A., Kurokawa, H., Morimura, T., Hanyu, A., Hama, H., Osawa, H., Kashiwagi, S., Fukami, K., Miyata, T., Miyoshi, H., et al. (2008) · Cell · doi:10.1016/j.cell.2007.12.033 · Cited by 2,173
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Three-Dimensional Cell Culture: A Breakthrough in Vivo
Antoni, D., Burckel, H., Josset, E., & Noel, G. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16035517 · Cited by 990
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Bioactive Silicate Nanoplatelets for Osteogenic Differentiation of Human Mesenchymal Stem Cells
Gaharwar, A. K., Mihaila, S. M., Swami, A., Patel, A., Sant, S., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Materials · doi:10.1002/adma.201300584 · Cited by 520
The nature of laponite and its aqueous dispersions
Thompson, D. W., & Butterworth, J. T. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90254-j · Cited by 419
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Clay: New Opportunities for Tissue Regeneration and Biomaterial Design
Dawson, J. I., & Oreffo, R. O. C. (2013) · Advanced Materials · doi:10.1002/adma.201301034 · Cited by 351
The effect of hydrogel charge density on cell attachment
Schneider, G. B., English, A., Abraham, M., Zaharias, R., Stanford, C., & Keller, J. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.084 · Cited by 314
Breslin, S., & O’Driscoll, L. (2016) · Oncotarget · doi:10.18632/oncotarget.9935 · Cited by 311
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Principles of Regenerative Medicine
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-61040-0 · Cited by 274
Engineered Nanomaterials for Infection Control and Healing Acute and Chronic Wounds
Parani, M., Lokhande, G., Singh, A., & Gaharwar, A. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00291 · Cited by 265
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Transparent, elastomeric and tough hydrogels from poly(ethylene glycol) and silicate nanoparticles
Gaharwar, A. K., Rivera, C. P., Wu, C.-J., & Schmidt, G. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.07.023 · Cited by 252
Introduction to cell–hydrogel mechanosensing
Ahearne, M. (2014) · Interface Focus · doi:10.1098/rsfs.2013.0038 · Cited by 251
PEG/clay nanocomposite hydrogel: a mechanically robust tissue engineering scaffold
Chang, C.-W., van Spreeuwel, A., Zhang, C., & Varghese, S. (2010) · Soft Matter · doi:10.1039/c0sm00067a · Cited by 246
Gaharwar, A. K., Schexnailder, P. J., Kline, B. P., & Schmidt, G. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.015 · Cited by 178
Paul, A., Manoharan, V., Krafft, D., Assmann, A., Uquillas, J. A., Shin, S. R., Hasan, A., Hussain, M. A., Memic, A., Gaharwar, A. K., et al. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02745d · Cited by 178
Nanoengineered Colloidal Inks for 3D Bioprinting
Peak, C. W., Stein, J., Gold, K. A., & Gaharwar, A. K. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b02540 · Cited by 178
Injectable shear-thinning nanoengineered hydrogels for stem cell delivery
Thakur, A., Jaiswal, M. K., Peak, C. W., Carrow, J. K., Gentry, J., Dolatshahi-Pirouz, A., & Gaharwar, A. K. (2016) · Nanoscale · doi:10.1039/c6nr02299e · Cited by 173
Rheological Hysteresis in Soft Glassy Materials
Divoux, T., Grenard, V., & Manneville, S. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.018304 · Cited by 170
3D bioprinting of biomimetic aortic vascular constructs with self‐supporting cells
Kucukgul, C., Ozler, S. B., Inci, I., Karakas, E., Irmak, S., Gozuacik, D., Taralp, A., & Koc, B. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25493 · Cited by 161
Recent advances in clay mineral-containing nanocomposite hydrogels
Zhao, L. Z., Zhou, C. H., Wang, J., Tong, D. S., Yu, W. H., & Wang, H. (2015) · Soft Matter · doi:10.1039/c5sm01277e · Cited by 154
Gaharwar, A. K., Arpanaei, A., Andresen, T. L., & Dolatshahi‐Pirouz, A. (2016) · Advanced Materials · doi:10.1002/adma.201503918 · Cited by 92
Multifunctional 3D printing of heterogeneous hydrogel structures
Nadernezhad, A., Khani, N., Skvortsov, G. A., Toprakhisar, B., Bakırcı, E., Menceloǵlu, Y. Z., Ünal, S., & Koç, B. (2016) · Scientific Reports · doi:10.1038/srep33178 · Cited by 92
Self-citationSchexnailder, P. J., Gaharwar, A. K., Bartlett, R. L., Seal, B. L., & Schmidt, G. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.201000053 · Cited by 84
Eslahi, N., Simchi, A., Mehrjoo, M., Shokrgozar, M. A., & Bonakdar, S. (2016) · RSC Advances · doi:10.1039/c6ra08563f · Cited by 83
Three‐dimensional direct cell bioprinting for tissue engineering
Özler, S. B., Bakırcı, E., Küçükgül, C., & Koç, B. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33768 · Cited by 33
One-Step Fabrication of Biocompatible Multifaceted Nanocomposite Gels and Nanolayers
Topuz, F., Bartneck, M., Pan, Y., & Tacke, F. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01483 · Cited by 23
Self-citationMorariu, S., & Bercea, M. (2008) · Journal of Chemical & Engineering Data · doi:10.1021/je8005776 · Cited by 22
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Hydrogel-Forming Algae Polysaccharides: From Seaweed to Biomedical Applications
Beaumont, M., Tran, R., Vera, G., Niedrist, D., Rousset, A., Pierre, R., Shastri, V. P., & Forget, A. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01406 · Cited by 320
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Engineering bioinks for 3D bioprinting
Decante, G., Costa, J. B., Silva-Correia, J., Collins, M. N., Reis, R. L., & Oliveira, J. M. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2c · Cited by 237
“27 1605352 [94] Nadernezhad A, Caliskan O S, Topuz F, Afghah F, Erman B and Koc B 2019 Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting ACS Appl.”
Metadata
- Authors
- Nadernezhad, A., Caliskan, O. S., Topuz, F., Afghah, F., Erman, B., & Koc, B.
- Affiliations
- Sabancı Üniversitesi (TR)
- Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey 34956
- Venue
- ACS Applied Bio Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-16
- Volume
- 2
- Issue
- 2
- Pages
- 796-806
- ISSN
- 2576-6422 (ISSN-L)
- OpenAlex
- W2909382813
- Cited by
- 91
- References
- 40
- Citations by year
- 2026: 6 · 2025: 9 · 2024: 11 · 2023: 15 · 2022: 21 · 2021: 16 · 2020: 12 · 2019: 1
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Bio Materials (publishedVersion)
- PubMed (publishedVersion)
- Sabanci University (submittedVersion)
- Funders
- H2020 Marie Sklodowska-Curie Actions (116C031)
- Türkiye Bilimsel ve Teknolojik Arastirma Kurumu
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- extrusion-based 3D bioprinting, flow behavior, rheology, gelation, bioactivity (biomaterials), encapsulated cells, cell spreading, fibroblasts, hydrogels, shape fidelity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.