CoChat

Effect of Pt and Ionomer Distribution on Polymer Electrolyte Fuel Cell Performance and Durability

Open access
Kobayashi, Aki, Fujii, Takahiro, Harada, Chie, Yasumoto, Eiichi, Takeda, Kenyu, Kakinuma, Katsuyoshi, Uchida, Makoto · 2021 · ACS Applied Energy Materials

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.

Abstract

Carbon black (CB), which has been widely used as a catalyst support, has been treated by various activation processes in order to increase the surface area. High-surface-area CB has a high pore volume in the primary particles. The degree of ionomer impregnation in the nanosized pores is able to be evaluated by the hysteresis volume, which is calculated from N2-adsorption analysis. We investigated the effect of distributions of both Pt and ionomer on the surface of CB support nanopores on the cell performance and durability of cathode catalyst layers with catalysts using CB with various nanopore volumes for polymer electrolyte fuel cells. The optimum ionomer content is affected by the nanopore volume, and the excess ionomer was found to block the entrances of the nanopores. For maximizing the cell performance and durability, we found that a high-surface-area CB was beneficial for achieving decreased Pt particle size, and the ionomer content was optimized to prevent the blocking of the nanopores. Improvement of the transport of oxygen and protons to Pt in the nanopores and increase in the interparticle distance led to both increase in the electrochemical surface area and suppression of Ostwald ripening and coarsening.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsaem.0c02841

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 45 references

Research works printed but not linked: 1

  1. Sotomayor, 2018, Characterization of Micro/Mesoporous Materials by Physisorption: Concepts and Case Studies, Acc. Mater. Surf. Res., 3, 34

Cited by

Metadata

Authors
Kobayashi, A., Fujii, T., Harada, C., Yasumoto, E., Takeda, K., Kakinuma, K., & Uchida, M.
Affiliations
  • Panasonic (Japan) (JP)
  • University of Yamanashi (JP)
Corresponding author
Uchida, Makoto
Venue
ACS Applied Energy Materials
Published
2021-02-04
Volume
4
Issue
3
Pages
2307-2317
ISSN
2574-0962 (ISSN-L)
OpenAlex
W3128194611
Cited by
109
References
45
Citations by year
2026: 18 · 2025: 28 · 2024: 21 · 2023: 22 · 2022: 14 · 2021: 6
FWCI
4.63
Type
journal article
Language
en
Open access
Locations
ACS Applied Energy Materials (publishedVersion, cc-by)
Funders
New Energy and Industrial Technology Development Organization (NA)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
proton exchange membrane fuel cells, platinum distribution, ionomer distribution, cathode catalyst layer, fuel cell durability, oxygen transport, proton transport, Ostwald ripening, electrochemically active surface area, interparticle distance, high surface area carbon

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.