Effect of Pt and Ionomer Distribution on Polymer Electrolyte Fuel Cell Performance and Durability
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Carbon black (CB), which has been widely used as a catalyst support, has been treated by various activation processes in order to increase the surface area. High-surface-area CB has a high pore volume in the primary particles. The degree of ionomer impregnation in the nanosized pores is able to be evaluated by the hysteresis volume, which is calculated from N2-adsorption analysis. We investigated the effect of distributions of both Pt and ionomer on the surface of CB support nanopores on the cell performance and durability of cathode catalyst layers with catalysts using CB with various nanopore volumes for polymer electrolyte fuel cells. The optimum ionomer content is affected by the nanopore volume, and the excess ionomer was found to block the entrances of the nanopores. For maximizing the cell performance and durability, we found that a high-surface-area CB was beneficial for achieving decreased Pt particle size, and the ionomer content was optimized to prevent the blocking of the nanopores. Improvement of the transport of oxygen and protons to Pt in the nanopores and increase in the interparticle distance led to both increase in the electrochemical surface area and suppression of Ostwald ripening and coarsening.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, the support [88,91] (e.g., nanopore volume [88]) or Pt loading on carbon [92,93] will impact the optimal I/C ratio”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [88]
In the citing paper
“However, for Pt/Ketjen, Ketjen carbon black is a porous carbon support and has a high surface area and abundant internal pore; only ∼50% or even less than 50% of Pt nanoparticles reside on the external surface [87,88].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [88]
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Instability of Pt∕C Electrocatalysts in Proton Exchange Membrane Fuel Cells
Ferreira, P. J., la O’, G. J., Shao-Horn, Y., Morgan, D., Makharia, R., Kocha, S., & Gasteiger, H. A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2050347 · Cited by 1,491
Density functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons
Neimark, A. V., Lin, Y., Ravikovitch, P. I., & Thommes, M. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.050 · Cited by 868
Physical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Yarlagadda, V., Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Koestner, R., Gu, W., Thompson, L., & Kongkanand, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00186 · Cited by 686
Current status of automotive fuel cells for sustainable transport
Pollet, B. G., Kocha, S. S., & Staffell, I. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.04.021 · Cited by 438
Gor, G. Y., Thommes, M., Cychosz, K. A., & Neimark, A. V. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.037 · Cited by 432
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Research works printed but not linked: 1
- Sotomayor, 2018, Characterization of Micro/Mesoporous Materials by Physisorption: Concepts and Case Studies, Acc. Mater. Surf. Res., 3, 34
Cited by
Items 101–109 of 109
Multiphysics modeling of high-surface area carbon supports for polymer electrolyte fuel cells
İnce, A. C., Serincan, M. F., Babu, S. K., Spendelow, J. S., Holby, E. F., Pasaogullari, U., & Kort-Kamp, W. J. M. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177881
van der Horst, R. M., & Forner‐Cuenca, A. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae79e1
Pak, C., Cho, Y., Kim, S., Park, S. J., Kang, Y. S., Atanassov, P. B., & Yim, S. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6913739
Mohamed, A., Upreti, S. R., & Lee, C. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240851
Wang, D., Ding, Y., Li, C., Shang, Y., Ding, R., Liang, Q., Liu, Y., Guo, Z., Li, Y., Gao, Q., et al. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.150007
van Schalkwyk, F., Levecque, P. B. J., & Susac, D. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.241528
Polymer Electrolytes for Alkaline Fuel Cells
Wang, C., Wang, L., & Xu, H. (2026) · Springer eBooks · doi:10.1007/978-981-96-7358-2_22-1
Berber, M. R., Uchida, M., Iiyama, A., & Miyao, T. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.6c02086
Self-citationKim, S., Woo, S., Park, S., Jung, N., Yim, S., & Kang, Y. S. (2026) · Fuel Cells · doi:10.1002/fuce.70180
Metadata
- Authors
- Kobayashi, A., Fujii, T., Harada, C., Yasumoto, E., Takeda, K., Kakinuma, K., & Uchida, M.
- Affiliations
- Panasonic (Japan) (JP)
- University of Yamanashi (JP)
- Corresponding author
- Uchida, Makoto
- Venue
- ACS Applied Energy Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-04
- Volume
- 4
- Issue
- 3
- Pages
- 2307-2317
- ISSN
- 2574-0962 (ISSN-L)
- OpenAlex
- W3128194611
- Cited by
- 109
- References
- 45
- Citations by year
- 2026: 18 · 2025: 28 · 2024: 21 · 2023: 22 · 2022: 14 · 2021: 6
- FWCI
- 4.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- ACS Applied Energy Materials (publishedVersion, cc-by)
- Funders
- New Energy and Industrial Technology Development Organization (NA)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, platinum distribution, ionomer distribution, cathode catalyst layer, fuel cell durability, oxygen transport, proton transport, Ostwald ripening, electrochemically active surface area, interparticle distance, high surface area carbon
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.