The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Hydrophobic and Stable MXene–Polymer Pressure Sensors for Wearable Electronics
Abstract
MXene has exhibited great potential for use in wearable devices, especially as pressure sensors, due to its lamellar structure, which changes its resistance as a function of interlayer distance. Despite the good performance of the reported pure MXene pressure sensors, their practical applications are limited by moderate flexibility, excessively high MXene conductivity, and environmental effects. To address the above challenges, we incorporated multilayer MXene particles into hydrophobic poly(vinylidene fluoride) trifluoroethylene (P(VDF-TrFE)) and prepared freestanding, flexible, and stable films via spin-coating. These films were assembled into highly sensitive piezoresistive pressure sensors, which show a fast response time of 16 ms in addition to excellent long-term stability with no obvious responsivity attenuation when the sensor is exposed to air, even after 20 weeks. Moreover, the fabricated sensors could monitor human physiological signals such as knee bending and cheek bulging and could be used for speech recognition. The mapping spatial pressure distribution function was also demonstrated by the designed 10 × 10 integrated pressure sensor array platform.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors
Wang, Z. L., Chen, J., & Lin, L. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01532d · Cited by 2,174
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Self-citationPersano, L., Dagdeviren, C., Su, Y., Zhang, Y., Girardo, S., Pisignano, D., Huang, Y., & Rogers, J. A. (2013) · Nature Communications · doi:10.1038/ncomms2639 · Cited by 1,271
Cited by
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citationFlexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Chaudhary, V., Kaushik, A., Furukawa, H., & Khosla, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5ac6 · Cited by 386
Yang, C.-R., Lin, M.-F., Huang, C.-K., Huang, W.-C., Tseng, S.-F., & Chiang, H.-H. (2022) · Measurement · doi:10.1016/j.measurement.2022.111817 · Cited by 77
Kim, D., Yang, Z., Cho, J., Park, D., Kim, D. H., Lee, J., Ryu, S., Kim, S., & Kim, M. (2023) · EcoMat · doi:10.1002/eom2.12384 · Cited by 64
MXenes for wearable pressure sensing: Progress and prospects in human motion detection
Kong, X., Fan, C., Liao, K., Zhang, W., & Xiong, H. (2025) · Alexandria Engineering Journal · doi:10.1016/j.aej.2025.01.086 · Cited by 7
Metadata
- Authors
- Li, L., Fu, X., Chen, S., Uzun, S., Levitt, A. S., Shuck, C. E., Han, W., & Gogotsi, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-03-11
- Volume
- 12
- Issue
- 13
- Pages
- 15362-15369
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3010945728
- Cited by
- 219
- References
- 4
- FWCI
- 10.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.