The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Potassium-Ion Oxygen Battery Based on a High Capacity Antimony Anode
Abstract
Recent investigations into the application of potassium in the form of potassium-oxygen, potassium-sulfur, and potassium-ion batteries represent a new approach to moving beyond current lithium-ion technology. Herein, we report on a high capacity anode material for use in potassium-oxygen and potassium-ion batteries. An antimony-based electrode exhibits a reversible storage capacity of 650 mAh/g (98% of theoretical capacity, 660 mAh/g) corresponding to the formation of a cubic K3Sb alloy. The Sb electrode can cycle for over 50 cycles at a capacity of 250 mAh/g, which is one of the highest reported capacities for a potassium-ion anode material. X-ray diffraction and galvanostatic techniques were used to study the alloy structure and cycling performance, respectively. Cyclic voltammetry and electrochemical impedance spectroscopy were used to provide insight into the thermodynamics and kinetics of the K-Sb alloying reaction. Finally, we explore the application of this anode material in the form of a K3Sb-O2 cell which displays relatively high operating voltages, low overpotentials, increased safety, and interfacial stability, effectively demonstrating its applicability to the field of metal oxygen batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Application of A‐C Techniques to the Study of Lithium Diffusion in Tungsten Trioxide Thin Films
Ho, C., Raistrick, I. D., & Huggins, R. A. (1980) · Journal of The Electrochemical Society · doi:10.1149/1.2129668 · Cited by 1,241
Nickel Hexacyanoferrate Nanoparticle Electrodes For Aqueous Sodium and Potassium Ion Batteries
Wessells, C. D., Peddada, S. V., Huggins, R. A., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl203193q · Cited by 1,074
A rechargeable room-temperature sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Vračar, M., Dürr, A. K., Garsuch, A., Janek, J., & Adelhelm, P. (2013) · Nature Materials · doi:10.1038/nmat3486 · Cited by 786
Aurbach, D., Levi, M. D., Levi, E., Teller, H., Markovsky, B., Salitra, G., Heider, U., & Heider, L. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838758 · Cited by 654
Cited by
Research Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Advancements and Challenges in Potassium Ion Batteries: A Comprehensive Review
Rajagopalan, R., Tang, Y., Ji, X., Jia, C., & Wang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909486 · Cited by 883
Eftekhari, A., Jian, Z., & Ji, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07989 · Cited by 860
Recent Progress in Rechargeable Potassium Batteries
Hwang, J., Myung, S., & Sun, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802938 · Cited by 651
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
Advanced Carbon‐Based Anodes for Potassium‐Ion Batteries
Wu, X., Chen, Y., Xing, Z., Lam, C. W. K., Pang, S., Zhang, W., & Ju, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900343 · Cited by 600
Materials Design for Rechargeable Metal-Air Batteries
Wang, H.-F., & Xu, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.008 · Cited by 580
Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries
Zhang, C., Xu, Y., Zhou, M., Liang, L., Dong, H., Wu, M., Yang, Y., & Lei, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604307 · Cited by 575
Hard–Soft Composite Carbon as a Long‐Cycling and High‐Rate Anode for Potassium‐Ion Batteries
Jian, Z., Hwang, S., Li, Z., Hernandez, A. S., Wang, X., Xing, Z., Su, D., & Ji, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700324 · Cited by 551
Xiao, N., McCulloch, W. D., & Wu, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04945 · Cited by 483
Self-citationExtremely stable antimony–carbon composite anodes for potassium-ion batteries
Zheng, J., Yang, Y., Fan, X., Ji, G., Ji, X., Wang, H., Hou, S., Zachariah, M. R., & Wang, C. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02836b · Cited by 430
Electrolytes and Interphases in Potassium Ion Batteries
Zhou, M., Bai, P., Ji, X., Yang, J., Wang, C., & Xu, Y. (2021) · Advanced Materials · doi:10.1002/adma.202003741 · Cited by 379
Recent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
MXene‐Based Dendrite‐Free Potassium Metal Batteries
Tang, X., Zhou, D., Li, P., Guo, X., Sun, B., Liu, H., Yan, K., Gogotsi, Y., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201906739 · Cited by 346
MoS2 as a long-life host material for potassium ion intercalation
Ren, X., Zhao, Q., McCulloch, W. D., & Wu, Y. (2017) · Nano Research · doi:10.1007/s12274-016-1419-9 · Cited by 316
Self-citationRecent progress in rechargeable alkali metal–air batteries
Zhang, X., Wang, X.-G., Xie, Z., & Zhou, Z. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.004 · Cited by 294
Dhir, S., Wheeler, S., Capone, I., & Pasta, M. (2020) · Chem · doi:10.1016/j.chempr.2020.08.012 · Cited by 293
Recent developments in electrode materials for potassium-ion batteries
Xu, Y.-S., Duan, S.-Y., Sun, Y.-G., Bin, D.-S., Tao, X.-S., Zhang, D., Liu, Y., Cao, A.-M., & Wan, L.-J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10953b · Cited by 269
High capacity potassium-ion battery anodes based on black phosphorus
Sultana, I., Rahman, M. M., Ramireddy, T., Chen, Y., & Glushenkov, A. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02483e · Cited by 267
Metadata
- Authors
- McCulloch, W. D., Ren, X., Yu, M., Huang, Z., & Wu, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-19
- Volume
- 7
- Issue
- 47
- Pages
- 26158-26166
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2196447875
- Cited by
- 269
- References
- 29
- FWCI
- 12.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.