The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels
Abstract
Aerogels based on cellulose nanofibrils (CNFs) have been of great interest as absorbents due to their high absorption capacity, low density, biodegradability, and large surface area. Hydrophobic aerogels have been designed to give excellent oil absorption tendency from water. Herein, we present an in situ method for CNF surface modification and hydrophobic aerogel preparation. Neither solvent exchange nor fluorine chemical is used in aerogel preparations. The as-prepared hydrophobic aerogels exhibit low density (23.2 mg/cm(-3)), high porosity (98.5%), good flexibility, and solvent-induced shape recovery property. Successful surface modification was confirmed through field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and water contact angle measurements. The hydrophobic aerogels show high absorption capacities for various oils, depending on liquid density, up to 47× their original weight but with low water uptake (<0.5 g/g aerogel).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silica Aerogel: Synthesis and Applications
Gurav, J. L., Jung, I.-K., Park, H.-H., Kang, E. S., & Nadargi, D. Y. (2010) · Journal of Nanomaterials · doi:10.1155/2010/409310 · Cited by 756
Cited by
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Ferroelectric Hf0.5Zr0.5O2 Thin Films: A Review of Recent Advances
Kim, S. J., Mohan, J., Summerfelt, S. R., & Kim, J. (2019) · JOM · doi:10.1007/s11837-018-3140-5 · Cited by 363
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Hierarchical Design of 1D Building Blocks for Anisotropic Aerogel
Long, X., Qin, J., Tang, J., Xue, J., Wang, Y., Zhou, L., Wang, S., Wei, X., Lin, Y., & Liao, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202413018 · Cited by 25
Metadata
- Authors
- Mulyadi, A., Zhang, Z., & Deng, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-22
- Volume
- 8
- Issue
- 4
- Pages
- 2732-2740
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2233316567
- Cited by
- 225
- References
- 1
- FWCI
- 10.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
