The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Hybrids of Two-Dimensional Ti3C2 and TiO2 Exposing {001} Facets toward Enhanced Photocatalytic Activity
Abstract
Effectively harvesting light to generate long-lived charge carriers to suppress the recombination of electrons and holes is crucial for photocatalytic reactions. Exposing the highly active facets has been regarded as a powerful approach to high-performance photocatalysts. Herein, a hybrid comprised of {001} facets of TiO2 nanosheets and layered Ti3C2, an emerging 2D material, was synthesized by a facile hydrothermal partial oxidation of Ti3C2. The in situ growth of TiO2 nanosheets on Ti3C2 allows for the interface with minimized defects, which was demonstrated by high-resolution transmission electron microscopy and density functional theory calculations. The highly active {001} facets of TiO2 afford high-efficiency photogeneration of electron-hole pairs, meanwhile the carrier separation is substantially promoted by the hole trapping effect by the interfacial Schottky junction with 2D Ti3C2 acting as a reservoir of holes. The improved charge separation and exposed active facets dramatically boost the photocatalytic degradation of methyl orange dye, showing the promise of 2D transition metal carbide for fabricating functional catalytic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Anatase TiO2 single crystals with a large percentage of reactive facets
Yang, H. G., Sun, C. H., Qiao, S. Z., Zou, J., Liu, G., Smith, S. C., Cheng, H. M., & Lu, G. Q. (2008) · Nature · doi:10.1038/nature06964 · Cited by 4,116
P25-Graphene Composite as a High Performance Photocatalyst
Zhang, H., Lv, X., Li, Y., Wang, Y., & Li, J. (2010) · ACS Nano · doi:10.1021/nn901221k · Cited by 3,184
Self-citationXiang, Q., Yu, J., & Jaroniec, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302846n · Cited by 2,360
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Tang, Q., Zhou, Z., & Shen, P. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308463r · Cited by 2,254
Cited by
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
Wang, D., Zhang, D., Yang, Y., Mi, Q., Zhang, J., & Yu, L. (2021) · ACS Nano · doi:10.1021/acsnano.0c09015 · Cited by 687
Recent advance in MXenes: A promising 2D material for catalysis, sensor and chemical adsorption
Zhu, J., Ha, E., Zhao, G., Zhou, Y., Huang, D., Yue, G., Hu, L., Sun, N., Wang, Y., Lee, L. Y. S., et al. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.09.012 · Cited by 659
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
Self-citationMXene: an emerging two-dimensional material for future energy conversion and storage applications
Chaudhari, N. K., Jin, H., Kim, B., San Baek, D., Joo, S. H., & Lee, K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09094c · Cited by 630
Yang, C., Tan, Q., Li, Q., Zhou, J., Fan, J., Li, B., Sun, J., & Lv, K. (2020) · Applied Catalysis B: Environment and Energy · doi:10.1016/j.apcatb.2020.118738 · Cited by 616
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Two-Dimensional Ti3C2Tx MXene Nanosheets for Efficient Copper Removal from Water
Shahzad, A., Rasool, K., Miran, W., Nawaz, M., Jang, J., Mahmoud, K. A., & Lee, D. S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02695 · Cited by 478
Two-dimensional MXene-based and MXene-derived photocatalysts: Recent developments and perspectives
Zhong, Q., Li, Y., & Zhang, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128099 · Cited by 466
Self-citationSu, T., Peng, R., Hood, Z. D., Naguib, M., Ivanov, I. N., Keum, J. K., Qin, Z., Guo, Z., & Wu, Z. (2018) · ChemSusChem · doi:10.1002/cssc.201702317 · Cited by 426
Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Huang, H., Song, Y., Li, N., Chen, D., Xu, Q., Li, H., He, J., & Lu, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.03.066 · Cited by 386
Benchakar, M., Loupias, L., Garnero, C., Bilyk, T., Morais, C., Canaff, C., Guignard, N., Morisset, S., Pazniak, H., Hurand, S., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147209 · Cited by 384
Oxygen‐Functionalized Ultrathin Ti 3 C 2 T x MXene for Enhanced Electrocatalytic Hydrogen Evolution
Jiang, Y., Sun, T., Xie, X., Jiang, W., Li, J., Tian, B., & Su, C. (2019) · ChemSusChem · doi:10.1002/cssc.201803032 · Cited by 367
Wang, D., Zhang, D., Guo, J., Hu, Y., Yang, Y., Sun, T., Zhang, H., & Liu, X. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106410 · Cited by 359
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Enhanced ammonia response of Ti3C2T nanosheets supported by TiO2 nanoparticles at room temperature
Tai, H., Duan, Z., He, Z., Li, X., Xu, J., Liu, B., & Jiang, Y. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.126874 · Cited by 325
Ratiometric photoluminescence sensing based on Ti3C2MXene quantum dots as an intracellular pH sensor
Chen, X., Sun, X., Xu, W., Pan, G., Zhou, D., Zhu, J., Wang, H., Bai, X., Dong, B., & Song, H. (2018) · Nanoscale · doi:10.1039/c7nr06958h · Cited by 316
Self-citationBoosting the Yield of MXene 2D Sheets via a Facile Hydrothermal-Assisted Intercalation
Han, F., Luo, S., Xie, L., Zhu, J., Wei, W., Chen, X., Liu, F., Chen, W., Zhao, J., Dong, L., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22339 · Cited by 304
MXenes Antibacterial Properties and Applications: A Review and Perspective
Seidi, F., Arabi Shamsabadi, A., Dadashi Firouzjaei, M., Elliott, M., Saeb, M. R., Huang, Y., Li, C., Xiao, H., & Anasori, B. (2023) · Small · doi:10.1002/smll.202206716 · Cited by 291
Cao, B., Wan, S., Wang, Y., Guo, H., Ou, M., & Zhong, Q. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.07.113 · Cited by 268
Peng, C., Wang, H., Yu, H., & Peng, F. (2017) · Materials Research Bulletin · doi:10.1016/j.materresbull.2016.12.049 · Cited by 264
Self-citationTi3C2 2D MXene: Recent Progress and Perspectives in Photocatalysis
Tang, R., Xiong, S., Gong, D., Deng, Y., Wang, Y., Su, L., Ding, C., Yang, L., & Liao, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c12905 · Cited by 259
Zhu, X.-D., Xie, Y., & Liu, Y.-T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08374f · Cited by 208
Guo, J., Zhao, Y., liu, A., & Ma, T. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.03.025 · Cited by 192
MXene‐Based Nonlinear Optical Information Converter for All‐Optical Modulator and Switcher
Wu, L., Jiang, X., Zhao, J., Liang, W., Li, Z., Huang, W., Lin, Z., Wang, Y., Zhang, F., Lu, S., et al. (2018) · Laser & Photonics Reviews · doi:10.1002/lpor.201800215 · Cited by 183
Metadata
- Authors
- Peng, C., Yang, X., Li, Y., Yu, H., Wang, H., & Peng, F.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-24
- Volume
- 8
- Issue
- 9
- Pages
- 6051-6060
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2277230366
- Cited by
- 847
- References
- 58
- FWCI
- 13.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.