The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Highly Stretchable and Sensitive Strain Sensor Based on Facilely Prepared Three-Dimensional Graphene Foam Composite
Abstract
Wearable strain sensors with excellent stretchability and sensitivity have emerged as a very promising field which could be used for human motion detection and biomechanical systems, etc. Three-dimensional (3D) graphene foam (GF) has been reported before for high-performance strain sensors, however, some problems such as high cost preparation, low sensitivity, and stretchability still remain. In this paper, we report a highly stretchable and sensitive strain sensor based on 3D GF and polydimethylsiloxane (PDMS) composite. The GF is prepared by assembly process from graphene oxide via a facile and scalable method and possesses excellent mechanical property which facilitates the infiltration of PDMS prepolymer into the graphene framework. The as-prepared strain sensor can be stretched as high as 30% of its original length and the gauge factor of this sensor is as high as 98.66 under 5% of applied strain. Moreover, the strain sensor shows long-term stability in 200 cycles of stretching-relaxing. Implementation of the device for monitoring the bending of elbow and finger results in reproducibility and various responses in the form of resistance change. Thus, the developed strain sensors exhibit great application potential in fields of biomechanical systems and human-interactive applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain Sensors
Yan, C., Wang, J., Kang, W., Cui, M., Wang, X., Foo, C. Y., Chee, K. J., & Lee, P. S. (2014) · Advanced Materials · doi:10.1002/adma.201304742 · Cited by 1,179
Wu, W., Wen, X., & Wang, Z. L. (2013) · Science · doi:10.1126/science.1234855 · Cited by 931
Material approaches to stretchable strain sensors
Park, J., You, I., Shin, S., & Jeong, U. (2015) · ChemPhysChem · doi:10.1002/cphc.201402810 · Cited by 216
Soft Core/Shell Packages for Stretchable Electronics
Lee, C. H., Ma, Y., Jang, K., Banks, A., Pan, T., Feng, X., Kim, J. S., Kang, D., Raj, M. S., McGrane, B. L., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501086 · Cited by 131
Cited by
Advanced Carbon for Flexible and Wearable Electronics
Wang, C., Xia, K., Wang, H., Liang, X., Yin, Z., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201801072 · Cited by 1,300
Duan, L., D'hooge, D. R., & Cardon, L. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100617 · Cited by 554
Laser‐Induced Graphene Strain Sensors Produced by Ultraviolet Irradiation of Polyimide
Carvalho, A. F., Fernandes, A. J. S., Leitão, C., Deuermeier, J., Marques, A. C., Martins, R., Fortunato, E., & Costa, F. M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805271 · Cited by 384
Advances in graphene-based flexible and wearable strain sensors
Chen, H., Zhuo, F., Zhou, J., Liu, Y., Zhang, J., Dong, S., Liu, X., Elmarakbi, A., Duan, H., & Fu, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142576 · Cited by 386
Recent Advances in Sensing Applications of Graphene Assemblies and Their Composites
Tung, T. T., Nine, M. J., Krebsz, M., Pasinszki, T., Coghlan, C. J., Tran, D. N. H., & Losic, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702891 · Cited by 294
Metadata
- Authors
- Li, J., Zhao, S., Zeng, X., Huang, W., Gong, Z., Zhang, G., Sun, R., & Wong, C.-P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-07-18
- Volume
- 8
- Issue
- 29
- Pages
- 18954-18961
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2467819111
- Cited by
- 207
- References
- 7
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
