The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Mechanistic Insight into the Chemical Exfoliation and Functionalization of Ti3C2 MXene
Abstract
MXene, a two-dimensional layer of transition metal carbides/nitrides, showed great promise for energy storage, sensing, and electronic applications. MXene are chemically exfoliated from the bulk MAX phase; however, mechanistic understanding of exfoliation and subsequent functionalization of these technologically important materials is still lacking. Here, using density-functional theory we show that exfoliation of Ti3C2 MXene proceeds via HF insertion through edges of Ti3AlC2 MAX phase. Spontaneous dissociation of HF and subsequent termination of edge Ti atoms by H/F weakens Al-MXene bonds. Consequent opening of the interlayer gap allows further insertion of HF that leads to the formation of AlF3 and H2, which eventually come out of the MAX, leaving fluorinated MXene behind. Density of state and electron localization function shows robust binding between F/OH and Ti, which makes it very difficult to obtain controlled functionalized or pristine MXene. Analysis of the calculated Gibbs free energy (ΔG) shows fully fluorinated MXene to be lowest in energy, whereas the formation of pristine MXene is thermodynamically least favorable. In the presence of water, mixed functionalized Ti3C2Fx(OH)1-x (x ranges from 0 to 1) MXene can be obtained. The ΔG values for the mixed functionalized MXenes are very close in energy, indicating the random and nonuniform functionalization of MXene. The microscopic understanding gained here unveils the challenges in exfoliation and controlling the functionalization of MXene, which is essential for its practical application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Canonical dynamics: Equilibrium phase-space distributions
Hoover, W. G. (1985) · Physical Review A · doi:10.1103/physreva.31.1695 · Cited by 23,465
A unified formulation of the constant temperature molecular dynamics methods
Nosé, S. (1984) · The Journal of Chemical Physics · doi:10.1063/1.447334 · Cited by 19,152
Generalized Gradient Approximation Made Simple [Phys. Rev. Lett. 77, 3865 (1996)]
Perdew, J. P., Burke, K., & Ernzerhof, M. (1997) · Physical Review Letters · doi:10.1103/physrevlett.78.1396 · Cited by 14,614
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
A simple measure of electron localization in atomic and molecular systems
Becke, A. D., & Edgecombe, K. E. (1990) · The Journal of Chemical Physics · doi:10.1063/1.458517 · Cited by 7,145
Cited by
Fundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Electronic properties and applications of MXenes: a theoretical review
Khazaei, M., Ranjbar, A., Arai, M., Sasaki, T., & Yunoki, S. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00140a · Cited by 1,151
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Cao, M.-S., Cai, Y.-Z., He, P., Shu, J.-C., Cao, W.-Q., & Yuan, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.051 · Cited by 979
Pang, S.-Y., Wong, Y.-T., Yuan, S., Liu, Y., Tsang, M.-K., Yang, Z., Huang, H., Wong, W.-T., & Hao, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b02578 · Cited by 835
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Fluoride‐Free Synthesis of Two‐Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System
Yang, S., Zhang, P., Wang, F., Ricciardulli, A. G., Lohe, M. R., Blom, P. W. M., & Feng, X. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201809662 · Cited by 788
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
Xu, D., Li, Z., Li, L., & Wang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000712 · Cited by 744
Synthesis, structure, properties and applications of MXenes: Current status and perspectives
Ronchi, R. M., Arantes, J. T., & Santos, S. F. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.114 · Cited by 698
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Panda, S., Deshmukh, K., Khadheer Pasha, S. K., Theerthagiri, J., Manickam, S., & Choi, M. Y. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214518 · Cited by 465
Surface Modification of 2D Photocatalysts for Solar Energy Conversion
Feng, C., Wu, Z., Huang, K., Ye, J., & Zhang, H. (2022) · Advanced Materials · doi:10.1002/adma.202200180 · Cited by 456
Recent progress on 2D magnets: Fundamental mechanism, structural design and modification
Jiang, X., Liu, Q., Xing, J., Liu, N., Guo, Y., Liu, Z., & Zhao, J. (2021) · Applied Physics Reviews · doi:10.1063/5.0039979 · Cited by 445
Recent advances in MXenes: From fundamentals to applications
Khazaei, M., Mishra, A., Venkataramanan, N. S., Singh, A. K., & Yunoki, S. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.01.002 · Cited by 408
Self-citationMachine-Learning-Assisted Accurate Band Gap Predictions of Functionalized MXene
Rajan, A. C., Mishra, A., Satsangi, S., Vaish, R., Mizuseki, H., Lee, K.-R., & Singh, A. K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00686 · Cited by 396
Self-citationRecent Progress in MXene‐Based Materials: Potential High‐Performance Electrocatalysts
Liu, A., Liang, X., Ren, X., Guan, W., Gao, M., Yang, Y., Yang, Q., Gao, L., Li, Y., & Ma, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003437 · Cited by 386
Halogen Etch of Ti3AlC2 MAX Phase for MXene Fabrication
Jawaid, A., Hassan, A., Neher, G., Nepal, D., Pachter, R., Kennedy, W. J., Ramakrishnan, S., & Vaia, R. A. (2021) · ACS Nano · doi:10.1021/acsnano.0c08630 · Cited by 369
Xu, X., Zhang, Y., Sun, H., Zhou, J., Yang, F., Li, H., Chen, H., Chen, Y., Liu, Z., Qiu, Z., et al. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202000967 · Cited by 305
A review of etching methods of MXene and applications of MXene conductive hydrogels
Zhou, C., Zhao, X., Xiong, Y., Tang, Y., Ma, X., Tao, Q., Sun, C., & Xu, W. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111063 · Cited by 287
Functional MXene Materials: Progress of Their Applications
Li, X., Wang, C., Cao, Y., & Wang, G. (2018) · Chemistry – An Asian Journal · doi:10.1002/asia.201800543 · Cited by 285
2D Transition Metal Carbides (MXenes) for Carbon Capture
Persson, I., Halim, J., Lind, H., Hansen, T. W., Wagner, J. B., Näslund, L., Darakchieva, V., Palisaitis, J., Rosen, J., & Persson, P. O. Å. (2019) · Advanced Materials · doi:10.1002/adma.201805472 · Cited by 282
Deshmukh, K., Kovářík, T., & Khadheer Pasha, S. K. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213514 · Cited by 282
Hao, S., Han, H., Yang, Z., Chen, M., Jiang, Y., Lu, G., Dong, L., Wen, H., Li, H., Liu, J., et al. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00901-w · Cited by 280
Metadata
- Authors
- Srivastava, P., Mishra, A., Mizuseki, H., Lee, K.-R., & Singh, A. K.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-29
- Volume
- 8
- Issue
- 36
- Pages
- 24256-24264
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2517512963
- Cited by
- 326
- References
- 48
- FWCI
- 6.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.