Copolymer Brushes with Temperature-Triggered, Reversibly Switchable Bactericidal and Antifouling Properties for Biomaterial Surfaces
The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
The adherence of bacteria and the formation of biofilm on implants is a serious problem that often leads to implant failure. A series of antimicrobial coatings have been constructed to resist bacterial adherence or to kill bacteria through contact with or release of antibacterial agents. The accumulation of dead bacteria facilitates further bacterial contamination and biofilm development. Herein, we have designed and constructed a novel, reversibly switchable bactericidal and antifouling surface through surface-initiated reversible addition–fragmentation chain transfer (RAFT) polymerization to combine thermally responsive N -isopropylacrylamide (NIPAAm) and bactericidal quaternary ammonium salts (2-(dimethylamino)-ethyl methacrylate (DMAEMA + )). Measurements of spectroscopic ellipsometry and water contact angle and X-ray photoelectron spectroscopy were used to examine the process of the surface functionalization. The temperature-responsive P(DMAEMA + - co -NIPAAm) copolymer coating can switch by phase transition between a hydrophobic capturing surface at high temperatures and a relatively hydrophilic antifouling surface at lower temperatures. The quaternary ammonium salts of PDMAEMA + displayed bactericidal efficiency against both Escherichia coli and Staphylococcus aureus . The functionalized surface could efficiently prevent bovine serum albumin adsorption and had good biocompatibility against human lens epithelial cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Recently, Wang et al. reported the synthesis of a temperature-triggered, recycable bactericidal and antifouling surface [126], [127].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“Remarkably, the surface is capable of releasing the adhered bacteria corpses when the temperature is reduced to below the LCST.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“Moreover, the surface maintains its self-cleaning and bactericidal properties by simply washing with cold water and has good biocompatibility.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“At a temperature above the lower critical solution temperature (LCST), the biomaterial surface is able to capture and effectively kill bacteria due to the presence of quaternized p(DMAEMA).”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
Citations
Cites
1 retracted
Wang, B. L., Jin, T. W., Han, Y. M., Shen, C. H., Li, Q., Lin, Q. K., & Chen, H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00597c · Cited by 79
Self-citationRetractedControlled Synthesis of Polymer Brushes by “Living” Free Radical Polymerization Techniques
Husseman, M., Malmström, E. E., McNamara, M., Mate, M., Mecerreyes, D., Benoit, D. G., Hedrick, J. L., Mansky, P., Huang, E., Russell, T. P., et al. (1999) · Macromolecules · doi:10.1021/ma981290v · Cited by 927
Inhibition of bacterial adhesion and biofilm formation on zwitterionic surfaces
Cheng, G., Zhang, Z., Chen, S., Bryers, J. D., & Jiang, S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.041 · Cited by 729
Integrated Antimicrobial and Nonfouling Zwitterionic Polymers
Mi, L., & Jiang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201304060 · Cited by 636
Fu, J., Ji, J., Yuan, W., & Shen, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.034 · Cited by 459
Dual-function antibacterial surfaces for biomedical applications
Yu, Q., Wu, Z., & Chen, H. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.018 · Cited by 411
Self-citationAntibacterial cellulose fiber via RAFT surface graft polymerization
Roy, D., Knapp, J. S., Guthrie, J. T., & Perrier, S. (2008) · Biomacromolecules · doi:10.1021/bm700849j · Cited by 351
Antibacterial Polypropylene via Surface-Initiated Atom Transfer Radical Polymerization
Huang, J., Murata, H., Koepsel, R. R., Russell, A. J., & Matyjaszewski, K. (2007) · Biomacromolecules · doi:10.1021/bm061236j · Cited by 318
Reversibly Switching the Function of a Surface between Attacking and Defending against Bacteria
Cao, Z., Mi, L., Mendiola, J., Ella‐Menye, J., Zhang, L., Xue, H., & Jiang, S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106466 · Cited by 276
Poly(ethylene imine)s as Antimicrobial Agents with Selective Activity
Gibney, K. A., Sovadinova, I., Lopez, A. I., Urban, M., Ridgway, Z., Caputo, G. A., & Kuroda, K. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200052 · Cited by 251
Research works printed but not linked: 1
- Ting Wei Q. Y., 2016, Adv. Healthcare Mater., 5, 449, 10.1002/adhm.201500700 · DOI · Paper page
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“reported the synthesis of a temperature-triggered, recycable bactericidal and antifouling surface [126, 127] .”
BackgroundVersatile Antibacterial Materials: An Emerging Arsenal for Combatting Bacterial Pathogens
Ding, X., Duan, S., Ding, X., Liu, R., & Xu, F. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802140 · Cited by 489
Wei, T., Yu, Q., & Chen, H. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801381 · Cited by 461
Self-citationPoly(N-isopropylacrylamide)-Based Thermoresponsive Composite Hydrogels for Biomedical Applications
Xu, X., Liu, Y., Fu, W., Yao, M., Ding, Z., Xuan, J., Li, D., Wang, S., Xia, Y., & Cao, M. (2020) · Polymers · doi:10.3390/polym12030580 · Cited by 402
Functional polymer materials for modern marine biofouling control
Qiu, H., Feng, K., Gapeeva, A., Meurisch, K., Kaps, S., Li, X., Yu, L., Mishra, Y. K., Adelung, R., & Baum, M. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101516 · Cited by 389
Smart Antibacterial Surfaces with Switchable Bacteria-Killing and Bacteria-Releasing Capabilities
Wei, T., Tang, Z., Yu, Q., & Chen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13565 · Cited by 382
Self-citationAnsari, M. J., Rajendran, R. R., Mohanto, S., Agarwal, U., Panda, K., Dhotre, K., Manne, R., Deepak, A., Zafar, A., Yasir, M., et al. (2022) · Gels · doi:10.3390/gels8070454 · Cited by 337
Khan, F., Atif, M., Haseen, M., Kamal, S., Khan, M. S., Shahid, S., & Nami, S. A. A. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb01345a · Cited by 255
A novel high-strength poly(ionic liquid)/PVA hydrogel dressing for antibacterial applications
Fang, H., Wang, J., Li, L., Xu, L., Wu, Y., Wang, Y., Fei, X., Tian, J., & Li, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.030 · Cited by 261
Self-citationAntibacterial hydrogel coating: Strategies in surface chemistry
Zhao, C., Zhou, L., Chiao, M., & Yang, W. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102280 · Cited by 242
Wang, Y., Jin, Y., Chen, W., Wang, J., Chen, H., Sun, L., Li, X., Ji, J., Yu, Q., Shen, L., et al. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.002 · Cited by 245
Self-citationLi, X., Wu, B., Chen, H., Nan, K., Jin, Y., Sun, L., & Wang, B. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01245h · Cited by 237
Self-citationQiu, H., Si, Z., Luo, Y., Feng, P., Wu, X., Hou, W., Zhu, Y., Chan-Park, M. B., Xu, L., & Huang, D. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00910 · Cited by 183
Chen, H., Yang, J., Sun, L., Zhang, H., Guo, Y., Qu, J., Jiang, W., Chen, W., Ji, J., Yang, Y., et al. (2019) · Small · doi:10.1002/smll.201903880 · Cited by 185
Self-citationPolymeric antibacterial materials: design, platforms and applications
Luo, H., Yin, X.-Q., Tan, P.-F., Gu, Z.-P., Liu, Z.-M., & Tan, L. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00109d · Cited by 176
Hu, J., Lin, J., Zhang, Y., Lin, Z., Qiao, Z., Liu, Z., Yang, W. B., Liu, X., Dong, M., & Guo, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07236e · Cited by 155
Wang, Y., Wei, T., Qu, Y., Zhou, Y., Zheng, Y., Huang, C., Zhang, Y., Yu, Q., & Chen, H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17581 · Cited by 150
Self-citationZou, Y., Zhang, Y., Yu, Q., & Chen, H. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.07.028 · Cited by 152
Self-citationMitra, D., Kang, E. T., & Neoh, K. G. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00125 · Cited by 150
Wei, T., Zhan, W., Yu, Q., & Chen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06483 · Cited by 144
Self-citationAdaptive Coatings with Anticorrosion and Antibiofouling Properties
Yimyai, T., Thiramanas, R., Phakkeeree, T., Iamsaard, S., & Crespy, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102568 · Cited by 118
Design of smart targeted and responsive drug delivery systems with enhanced antibacterial properties
Chen, H., Jin, Y., Wang, J., Wang, Y., Jiang, W., Dai, H., Pang, S., Lei, L., Ji, J., & Wang, B. (2018) · Nanoscale · doi:10.1039/c8nr07146b · Cited by 122
Self-citationAntimicrobial and Antifouling Polymeric Agents for Surface Functionalization of Medical Implants
Zeng, Q., Zhu, Y., Yu, B., Sun, Y., Ding, X., Chen, X., Wu, Y., Tang, Z., & Xu, F. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00399 · Cited by 116
Methacrylate-ended polypeptides and polypeptoids for antimicrobial and antifouling coatings
Gao, Q., Li, P., Zhao, H., Chen, Y., Liu, J., & Ma, P. X. (2017) · Polymer Chemistry · doi:10.1039/c7py01495c · Cited by 111
Zhang, M., Zhang, H., Feng, J., Zhou, Y., & Wang, B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124778 · Cited by 97
Self-citationCosta, R. C., NAGAY, B. E., Bertolini, M., Oliveira, B. E. C., Sampaio, A. A., Retamal‐Valdes, B., Shibli, J. A., Feres, M., Barão, V. A. R., & Souza, J. G. S. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102551 · Cited by 96
Ma, H., Zhao, Y., Lu, Z., Xing, R., Yao, X., Jin, Z., Wang, Y., & Yu, F. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.164 · Cited by 88
Self-citationQi, F., Qian, Y., Shao, N., Zhou, R., Zhang, S., Lu, Z., Zhou, M., Xie, J., Wei, T., Yu, Q., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02915 · Cited by 87
Superwettable Surface Engineering in Controlling Cell Adhesion for Emerging Bioapplications
Cui, H., Wang, W., Shi, L., Song, W., & Wang, S. (2020) · Small Methods · doi:10.1002/smtd.202000573 · Cited by 88
Qu, Y., Wei, T., Zhao, J., Jiang, S., Yang, P., Yu, Q., & Chen, H. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01122b · Cited by 83
Self-citationRecent Advances in Antifouling Surface Polymer Brushes
Xu, X., Chang, Y.-X., Gong, Y., Zhang, Y., Yu, Y., Peng, H., & Fu, C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02150 · Cited by 88
Antibacterial material surfaces/interfaces for biomedical applications
Wang, Y., Wang, F., Zhang, H., Yu, B., Cong, H., & Shen, Y. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101192 · Cited by 89
Self-citationAdvances in design and biomedical application of hierarchical polymer brushes
Yang, R., Wang, X., Yan, S., Dong, A., Luan, S., & Yin, J. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101409 · Cited by 79
Xu, Q., Xi, L., Jin, Y., Sun, L. N., Ding, X., Liang, L., Wang, L., Nan, K., Ji, J., Chen, H., et al. (2017) · Nanoscale · doi:10.1039/c7nr07106j · Cited by 78
Self-citationHuang, L., Zhang, L., Xiao, S., Yang, Y., Chen, F., Fan, P., Zhao, Z., Zhong, M., & Yang, J. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.142 · Cited by 77
Tallet, L., Gribova, V., Ploux, L., Vrana, N. E., & Lavall�e, P. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001199 · Cited by 81
Yao, Q., Ye, Z., Sun, L. N., Jin, Y., Xu, Q., Yang, M., Wang, Y., Zhou, Y., Ji, J., Chen, H., et al. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02114c · Cited by 76
Self-citationSwitchable Dual-Function and Bioresponsive Materials to Control Bacterial Infections
Ghasemlou, M., Daver, F., Ivanova, E. P., Rhim, J., & Adhikari, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05901 · Cited by 74
Wang, B., Zhou, L., Guo, Y., Guo, H., Zhong, Y., Huang, X., Ge, Y., Wang, Q., Chu, X., Jin, Y., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.10.032 · Cited by 79
Self-citationSu, C., Hu, Y., Song, Q., Ye, Y., Gao, L., Li, P., & Ye, T. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22611 · Cited by 72
Temperature-Responsive Polymer Brush Coatings for Advanced Biomedical Applications
Nastyshyn, S., Stetsyshyn, Y., Raczkowska, J., Nastishin, Y. A., Melnyk, Y., Panchenko, Y., & Budkowski, A. (2022) · Polymers · doi:10.3390/polym14194245 · Cited by 68
Xue, X., Thiagarajan, L., Braim, S. A., Saunders, B. R., Shakesheff, K. M., & Alexander, C. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00052a · Cited by 67
A novel hydrogel with self-healing property and bactericidal activity
Wu, Y., Wang, J., Li, L., Xu, F., Xu, L., Wang, Y., Tian, J., & Li, Y. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.09.105 · Cited by 61
Self-citationWang, Y., Wu, J., Zhang, D., Chen, F., Fan, P., Zhong, M., Xiao, S., Chang, Y., Gong, X., Yang, J., et al. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01313j · Cited by 60
Self-citationWang, M., Zheng, Y., Yin, C., Dai, S., Fan, X., Jiang, Y., Liu, X., Fang, J., Yi, B., Zhou, Q., et al. (2023) · Frontiers in Microbiology · doi:10.3389/fmicb.2023.1343202 · Cited by 60
Santoro, O., & Izzo, L. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25147587 · Cited by 62
“RAFT was also applied to obtain a reversibly switchable bactericidal and antifouling surface combining the thermally responsive N -isopropylacrylamide (NIPAAm) and bactericidal quaternary ammonium salts of DMAEMA [31].”
BackgroundMethodWang, Y., Sun, Y., Xue, Y., Sui, X., Yuan, B., Wang, Y., & Liang, W. (2024) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.108167 · Cited by 54
Self-citationSweet Switch: Sugar-Responsive Bioactive Surfaces Based on Dynamic Covalent Bonding
Zhan, W., Qu, Y., Wei, T., Hu, C., Pan, Y., Yu, Q., & Chen, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18166 · Cited by 55
Self-citationMao, S., Zhang, D., He, X., Yang, Y., Protsak, I. S., Li, Y., Wang, J., Ma, C., Tan, J., & Yang, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c16510 · Cited by 53
Self-citationSu, Y., Feng, T., Feng, W., Pei, Y., Li, Z., Huo, J., Xie, C., Qu, X., Li, P., & Huang, W. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900268 · Cited by 52
Tong, W., Xiong, Y., Duan, S., Ding, X., & Xu, F. (2019) · Biomaterials Science · doi:10.1039/c8bm01483c · Cited by 51
Thermoresponsive Nanostructures: From Mechano-Bactericidal Action to Bacteria Release
Jiang, R., Yi, Y., Hao, L., Chen, Y., Tian, L., Dou, H., Zhao, J., Ming, W., & Ren, L. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c16487 · Cited by 51
Li, S., Huang, P., Ye, Z., Wang, Y. P., Wang, W., Kong, D., Zhang, J., Deng, L., & Dong, A. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01337g · Cited by 49
Self-citationShao, Y., Suo, H., Wang, S., Peng, Y., Chu, X., Long, Z., Du, K., Su, L., Sun, X., Wang, X., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.148576 · Cited by 48
Self-citationZhang, T., Liu, Q., Meng, F., Hou, Y., Leung, M. K. H., Wen, Y., & Zhang, Q. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.107923 · Cited by 53
Host–Guest Interaction-Mediated Photo/Temperature Dual-Controlled Antibacterial Surfaces
Ni, Y., Zhang, D., Wang, Y., He, X., He, J., Wu, H., Yuan, J., Sha, D., Che, L., Tan, J., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c21626 · Cited by 45
Self-citationBiointerface Coatings With Structural and Biochemical Properties Modifications of Biomaterials
Lee, C., Hu, S., Christy, J., Chou, F., Ramli, T. C., & Chen, H. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202202286 · Cited by 59
Self-citationAntibacterial surface based on new epoxy-amine networks from ionic liquid monomers
Livi, S., Lins, L. C., Capeletti, L. B., Chardin, C., Halawani, N., Baudoux, J., & Cardoso, M. B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.04.008 · Cited by 43
Yu, X. Y., Yang, Y., Yang, W., Wang, X., Liu, X., Zhou, F., & Zhao, Y. J. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.12.038 · Cited by 44
Pan, F., Zhang, S., Altenried, S., Zuber, F., Chen, Q., & Ren, Q. (2022) · Biomaterials Science · doi:10.1039/d2bm01244h · Cited by 38
Fan, Y., Boulif, N., & Picchioni, F. (2018) · Polymers · doi:10.3390/polym10010092 · Cited by 37
“Since the discovery of thermo-responsive polymers, application fields have been expanded to a variety of subjects: drug delivery [3,9], bioengineering [2,10], sensors [11,12], functional coatings [13,14], and enhanced oil recovery (EOR) [15,16].”
Smart drug delivery and responsive microneedles for wound healing
Liu, M., Jiang, J., Wang, Y., Liu, H., Lu, Y., & Wang, X. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101321 · Cited by 43
Self-citationLiu, Y., Waterhouse, G. I. N., Jiang, X., Zhang, Z., & Yu, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151669 · Cited by 35
Smart Bionic Surfaces with Switchable Wettability and Applications
Li, S., Fan, Y., Liu, Y., Niu, S., Han, Z., & Ren, L. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-0038-7 · Cited by 36
He, M., Wang, Q., Zhao, W., Li, J., & Zhao, C. (2017) · Polymer Chemistry · doi:10.1039/c7py00967d · Cited by 33
Strategies and perspectives of developing anti-biofilm materials for improved food safety
Ma, Y., Aslam, M. Z., Wu, M., Nitin, N., & Sun, G. Z. (2022) · Food Research International · doi:10.1016/j.foodres.2022.111543 · Cited by 32
Decoration of Material Surfaces with Complex Physicochemical Signals for Biointerface Applications
Shi, Y. X., Liu, K., Zhang, Z., Tao, X., Chen, H., Kingshott, P., & Wang, P. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01806 · Cited by 28
Self-citationChen, T., Yang, H., Wu, X., Yu, D., Ma, A., Xu, H., Sun, K., & Wang, J. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b04187 · Cited by 27
Mechanoactive wound dressing using poly(N-isopropyl acrylamide) based hydrogels
Cao, Y., Zhang, X., Xu, T., Zhang, X., Wang, L., Wei, Y., Liang, Z., Liu, H., Zhao, L., & Huang, D. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112645 · Cited by 28
Self-citationRoussel, S., Udabe, J., Sabri, A. H. B., Calderón, M., & Donnelly, R. F. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.123847 · Cited by 29
Guo, Y., Qian, S., Wang, L., Zeng, J., Miao, R., Meng, Y., Jin, Y., Chen, H., & Wang, B. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01508c · Cited by 27
Self-citationProgress for the development of antibacterial surface based on surface modification technology
Huang, L., & Liu, C. (2022) · Supramolecular Materials · doi:10.1016/j.supmat.2022.100008 · Cited by 31
Jin, Y., Wang, Y., Yang, J., Zhang, H., Yang, Y., Chen, W., Jiang, W., Qu, J., Guo, Y., & Wang, B. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100173 · Cited by 26
Self-citationAcidic Dressing Based on Agarose/Cs2.5H0.5PW12O40 Nanocomposite for Infection Control in Wound Care
Piva, R. H., Rocha, M. C., Piva, D. H., Imasato, H., Malavazi, I., & Filho, U. P. R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09066 · Cited by 27
Antimicrobial Biomaterials Based on Physical and Physicochemical Action
Nowotnick, A. G., Xi, Z., Jin, Z., Khalatbarizamanpoor, S., Brauer, D. S., Löffler, B., & Jandt, K. D. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402001 · Cited by 28
Li, R., Lian, X., Wang, Z., & Wang, Y. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201804526 · Cited by 24
Self-citationPolymeric Nanoplatforms for the Delivery of Antibacterial Agents
Chen, Y., Huang, Y., & Jin, Q. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202100440 · Cited by 24
Lin, P.-A., Cheng, C., Hsieh, K.-T., & Lin, J. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111674 · Cited by 23
Thermoresponsive PNIPAm on anti-corrosion antibacterial coating for controlled Ag ions release
Li, Z., Liu, L., Zheng, H., Meng, F., & Wang, F. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101327 · Cited by 22
A reusable ionic liquid-grafted antibacterial cotton gauze wound dressing
Fang, H., Li, D., Xu, L., Wang, Y., Xu, F., Tian, J., & Li, Y. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05751-8 · Cited by 22
“Compared with Gram-negative bacteria, the peptidoglycan cell wall of Gram-positive bacteria is much thicker [28, 36].”
BackgroundSelf-citationPhunpee, S., Ruktanonchai, U., & Chirachanchai, S. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01226 · Cited by 22
Responsive Polyelectrolyte Brushes in Applications: Functions, Stimuli, and Design Considerations
Smook, L. A., Dahlin, A., Schroën, K. G. P. H., & de Beer, S. (2025) · Advanced Materials · doi:10.1002/adma.202509580 · Cited by 23
Goh, S. W., Ng, Q. H., Rahim, S. K. E. A., Low, S. C., Hoo, P. Y., Yeo, R. Y. Z., Chew, T. L., & Jawad, Z. A. (2025) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2025.106993 · Cited by 21
Chen, H., Jin, Y., Lei, L., Ding, X., Li, X., Wang, Y., Sun, L. N., Shen, L., Yang, M., & Wang, B. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.08.067 · Cited by 21
Self-citationQian, Y., Deng, S., Lu, Z., She, Y., Xie, J., Cong, Z., Zhang, W., & Liu, R. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01066 · Cited by 21
Wang, X., Shi, H., Tang, H., Yu, H., Yan, Q., Yang, H., Zhang, X., & Luan, S. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.05.017 · Cited by 20
Zhou, J., Huang, Z., Sun, Y., Cui, M., Luo, Z., Yu, B., Zou, X., & Hu, H. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111718 · Cited by 19
Li, W., Zhang, Y., Ding, J., Zhang, S., Hu, T., Li, S., An, X., Ren, Y., Fu, Q., Jiang, X., et al. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112496 · Cited by 19
Sun, J., Wu, X., Zhang, X., Sun, A., Ye, W., Liu, J., Liu, S., Zhang, C., Wang, L., Li, H., et al. (2022) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2022.100666 · Cited by 20
Bioinspired robust yet regenerable nanofibrous polymer brushes for broad-spectrum antifouling
Long, F. X., Liu, J., Li, X., Sun, F., Wu, H., Wang, R., Wang, R., Zhou, T., Hu, W., & Liu, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141475 · Cited by 18
Dual functional antifouling and bactericidal proteinaceous coating
Wang, Z., Fu, C., Gao, Y., Wu, Z., Chen, W., Hu, B., Xu, S., Zhang, Z., & Yang, P. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113239 · Cited by 18
Wang, B., Zeng, J., Guo, Y., Liang, L., Jin, Y., Qian, S., Miao, R., Hu, L., & Lu, F. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.05.062 · Cited by 17
Self-citationAthukoralalage, S. S. A., & Amiralian, N. (2025) · Materials Horizons · doi:10.1039/d5mh01132a · Cited by 18
Stimuli-responsive antimicrobial polymer systems: From structural design to biomedical applications
Guo, J., Tao, Y., Du, Z., Zhang, S., Zheng, W., Wang, Z., Yi, Z., Gou, Y., & Tang, W. (2025) · Giant · doi:10.1016/j.giant.2025.100366 · Cited by 16
The antifouling tris-(8-hydroxyquinoline) aluminum: Titanium dioxide coatings under visible light
Hou, J., Zhao, H., Zhang, Z., Yu, L., & Yan, X. (2023) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.129743 · Cited by 15
Fighting against biofilm: The antifouling and antimicrobial material
Li, C., Gao, D., Li, C., Cheng, G., & Zhang, L. (2024) · Biointerphases · doi:10.1116/6.0003695 · Cited by 16
Maity, N., Bruchiel‐Spanier, N., Sharabani‐Yosef, O., Mandler, D., & Eliaz, N. (2023) · Materials Advances · doi:10.1039/d3ma00169e · Cited by 15
Qiao, Z., Yan, Y., Su, Y., Song, S., Yin, M., & Luo, J. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00678 · Cited by 14
Andersen, C., Madsen, J., & Daugaard, A. E. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100437 · Cited by 13
Wang, B., Ye, Z., Xu, Q., Sun, L. N., Wang, Y., Shi, S., Wang, Z., Xu, X., Qu, J., & Nan, K. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.06.023 · Cited by 13
Self-citation
Metadata
- Authors
- Wang, B., Xu, Q., Ye, Z., Liu, H., Lin, Q., Nan, K., Li, Y., Wang, Y., Qi, L., & Chen, H.
- Affiliations
- Chinese Academy of Sciences (CN)
- Wenzhou Medical University (CN)
- Corresponding author
- Wang, Bailiang
- Chen, Hao
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-30
- Volume
- 8
- Issue
- 40
- Pages
- 27207-27217
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2523379390
- Cited by
- 130
- References
- 58
- Citations by year
- 2026: 6 · 2025: 7 · 2024: 14 · 2023: 14 · 2022: 13 · 2021: 18 · 2020: 19 · 2019: 17 · 2018: 12 · 2017: 10
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Wenzhou Municipal Science and Technology Bureau (2013S0458)
- National Natural Science Foundation of China (31570959, 51403158, 81271703)
- Natural Science Foundation of Zhejiang Province (LQ14C100002, LY12H12005)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- copolymer brushes, RAFT polymerization, N-isopropylacrylamide, quaternary ammonium compounds, PDMAEMA, thermoresponsive polymers, antifouling surfaces, bactericidal coatings, biofilm inhibition, bacterial adhesion, implant surface, hydrophilic-hydrophobic switching, bovine serum albumin adsorption, lens epithelial cells, biocompatibility
- MeSH terms
- Anti-Bacterial Agents, Biocompatible Materials, Humans, Polymers, Staphylococcus aureus, Surface Properties, Temperature
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.