Copolymer Brushes with Temperature-Triggered, Reversibly Switchable Bactericidal and Antifouling Properties for Biomaterial Surfaces
The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
The adherence of bacteria and the formation of biofilm on implants is a serious problem that often leads to implant failure. A series of antimicrobial coatings have been constructed to resist bacterial adherence or to kill bacteria through contact with or release of antibacterial agents. The accumulation of dead bacteria facilitates further bacterial contamination and biofilm development. Herein, we have designed and constructed a novel, reversibly switchable bactericidal and antifouling surface through surface-initiated reversible addition–fragmentation chain transfer (RAFT) polymerization to combine thermally responsive N -isopropylacrylamide (NIPAAm) and bactericidal quaternary ammonium salts (2-(dimethylamino)-ethyl methacrylate (DMAEMA + )). Measurements of spectroscopic ellipsometry and water contact angle and X-ray photoelectron spectroscopy were used to examine the process of the surface functionalization. The temperature-responsive P(DMAEMA + - co -NIPAAm) copolymer coating can switch by phase transition between a hydrophobic capturing surface at high temperatures and a relatively hydrophilic antifouling surface at lower temperatures. The quaternary ammonium salts of PDMAEMA + displayed bactericidal efficiency against both Escherichia coli and Staphylococcus aureus . The functionalized surface could efficiently prevent bovine serum albumin adsorption and had good biocompatibility against human lens epithelial cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Recently, Wang et al. reported the synthesis of a temperature-triggered, recycable bactericidal and antifouling surface [126], [127].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“Remarkably, the surface is capable of releasing the adhered bacteria corpses when the temperature is reduced to below the LCST.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“Moreover, the surface maintains its self-cleaning and bactericidal properties by simply washing with cold water and has good biocompatibility.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
In the citing paper
“At a temperature above the lower critical solution temperature (LCST), the biomaterial surface is able to capture and effectively kill bacteria due to the presence of quaternized p(DMAEMA).”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [126]
Citations
Cites
1 retracted
Wang, B. L., Jin, T. W., Han, Y. M., Shen, C. H., Li, Q., Lin, Q. K., & Chen, H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00597c · Cited by 79
Self-citationRetractedControlled Synthesis of Polymer Brushes by “Living” Free Radical Polymerization Techniques
Husseman, M., Malmström, E. E., McNamara, M., Mate, M., Mecerreyes, D., Benoit, D. G., Hedrick, J. L., Mansky, P., Huang, E., Russell, T. P., et al. (1999) · Macromolecules · doi:10.1021/ma981290v · Cited by 927
Inhibition of bacterial adhesion and biofilm formation on zwitterionic surfaces
Cheng, G., Zhang, Z., Chen, S., Bryers, J. D., & Jiang, S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.041 · Cited by 729
Integrated Antimicrobial and Nonfouling Zwitterionic Polymers
Mi, L., & Jiang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201304060 · Cited by 636
Fu, J., Ji, J., Yuan, W., & Shen, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.034 · Cited by 459
Dual-function antibacterial surfaces for biomedical applications
Yu, Q., Wu, Z., & Chen, H. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.018 · Cited by 411
Self-citationAntibacterial cellulose fiber via RAFT surface graft polymerization
Roy, D., Knapp, J. S., Guthrie, J. T., & Perrier, S. (2008) · Biomacromolecules · doi:10.1021/bm700849j · Cited by 351
Antibacterial Polypropylene via Surface-Initiated Atom Transfer Radical Polymerization
Huang, J., Murata, H., Koepsel, R. R., Russell, A. J., & Matyjaszewski, K. (2007) · Biomacromolecules · doi:10.1021/bm061236j · Cited by 318
Reversibly Switching the Function of a Surface between Attacking and Defending against Bacteria
Cao, Z., Mi, L., Mendiola, J., Ella‐Menye, J., Zhang, L., Xue, H., & Jiang, S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106466 · Cited by 276
Poly(ethylene imine)s as Antimicrobial Agents with Selective Activity
Gibney, K. A., Sovadinova, I., Lopez, A. I., Urban, M., Ridgway, Z., Caputo, G. A., & Kuroda, K. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200052 · Cited by 251
Research works printed but not linked: 1
- Ting Wei Q. Y., 2016, Adv. Healthcare Mater., 5, 449, 10.1002/adhm.201500700 · DOI · Paper page
Cited by
Items 101–131 of 131
Bacharouche, J., Erdemli, Ö., Rivet, R., Doucouré, B., Caillet, C., Mutschler, A., Lavall�e, P., Duval, J. F. L., Gantzer, C., & Francius, G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10424 · Cited by 12
Sun, X., Guo, Z., Huang, Q., & Gao, C. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09069 · Cited by 11
Hao, X., Zhou, J., Xie, J., Zou, X., Li, B., Liang, C., Zhang, Y., Peng, F., & Wang, D. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100285 · Cited by 15
Jonkers, W. A., Maan, A. M. C., Bonekamp, R., Pieters, L., Brinke, E. T., & de Vos, W. M. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01613 · Cited by 10
Porous Microstructured Surfaces with pH‐Triggered Antibacterial Properties
del Campo, A., Echeverría, C., Martín, M. S., Cuervo‐Rodríguez, R., Fernández‐García, M., & Muñoz‐Bonilla, A. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900127 · Cited by 10
Anti-Fouling Properties of Phosphonium Ionic Liquid Coatings in the Marine Environment
Baiju, S. K., Martin, B. J., Fredericks, R., Raghavan, H., Silva, K. D., & Cowan, M. G. (2023) · Polymers · doi:10.3390/polym15183677 · Cited by 9
Hegazy, M., Zhou, P., Wu, G., Taloub, N., Zayed, M., Huang, X. C., & Huang, Y. (2020) · Acta chimica slovenica · doi:10.17344/acsi.2019.5390 · Cited by 9
A hydrophilic nanocomposite coating with enhanced durability and antifouling properties
Lu, N., Wu, H.-M., Wang, J., Jiang, W., Deng, Z., & Deng, J. (2024) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-024-06355-3 · Cited by 7
Liu, Y., Han, Y., Wu, Y., Xiong, L., Hang, T., Ling, H., Hu, A., Gao, L., & Li, M. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100678 · Cited by 7
Surfaces functionalized with hierarchical polymer brushes and their biomedical applications
Yin, J., Luan, S., Yang, R., & Yan, S. (2020) · Scientia Sinica Chimica · doi:10.1360/ssc-2019-0159 · Cited by 7
Nanomaterial-based smart coatings for antibacterial, antifungal, and antiviral activities
Rani, D., Singh, R., Kush, P., & Kumar, P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91762-9.00008-3 · Cited by 7
Witzdam, L., White, T., & Rodriguez‐Emmenegger, C. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202400152 · Cited by 6
A new perspective on understanding antimicrobial strategies: The multifaceted role of temperature
Zhang, P., & Li, H. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177928 · Cited by 5
Chen, T., Situ, C., Huang, H., Liang, K., Zhao, L., Wang, Z., Zhao, J., Li, Y., Duan, C., & Sun, H. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c01005 · Cited by 5
Self-citationHu, S., Jiang, Y., Hu, B.-Y., Liu, S., Li, X., Li, X., Su, J.-L., Zheng, W., Zhou, W., & Ni, C. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.138694 · Cited by 4
Smart polymer coatings for membrane antifouling applications
Al-Najar, B. T., Albuflasa, H., & Naushad, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819961-9.00013-x · Cited by 2
Sen, S. O., Nayak, A. K., Devbhuti, P., & Sen, K. K. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2358133 · Cited by 3
Reactive Functionally Terminated Polyorganosiloxanes
Pang, Y., Koh, J. J., Li, Z., & He, C. (2020) · Wiley eBooks · doi:10.1002/9783527823499.ch2 · Cited by 2
Regenerable QPDMAEMA-coated bactericidal surfaces achieved by light-controlled molecular recognition
Hou, Y., Yang, Y., Leng, P., Ma, T., Jiang, G., Dong, Q., & Luo, C. (2025) · Chemical Physics Letters · doi:10.1016/j.cplett.2025.142327 · Cited by 1
Antimicrobial Surfaces for In vivo Applications
Wang, R., Wang, S., & Niu, L. (2025) · Wiley eBooks · doi:10.1002/9783527846979.ch19 · Cited by 1
Ayten, N. Y., Ay, E. N., Nejati, O., Torkay, G., Bal‐Öztürk, A., Çaylı, G., Acar, S., Mansuroğlu, D. S., & Hatir, P. Ç. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70432 · Cited by 1
Cho, Y., & Lee, J. (2022) · Journal of Polymer Science · doi:10.1002/pol.20210762 · Cited by 1
Model Membranes and Antimicrobial Activities of pH-Sensitive Copolymers
Saraiva, G. K. V., de Souza, V. V., de Oliveira, L. C., Procópio, A., Martins, M. T., Aidar, I. N., Yi, R. C. F., Lacerda, C. D., Carretero, G., Lira, R. B., et al. (2023) · Journal of the Brazilian Chemical Society · doi:10.21577/0103-5053.20230079 · Cited by 1
Bionic marine antifouling coating
Zhang, Q., Tong, Z., Zhan, X., & Chen, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91762-9.00002-2
Pal, A., On, T. J., Xu, Y., Alcantar-Garibay, O., Zdrale, G., Loui, M., Blanzy, J., Bichard, W., Preul, M. C., & Vernon, B. L. (2025) · Gels · doi:10.3390/gels11030156
“The LCST of the polymer can be modified by the copolymerization of NIPAAm with other hydrophobic or hydrophilic monomers to tailor its properties for various in situ biomedical applications [15–17], and particularly to develop this material as an injectable hydrogel.”
Polymeric ionic liquids as antibacterial agents and contact killing substrates
Pradhan, S., Panda, I., Bhola, R. K., Pucci, A., Samal, S. K., Müllen, K., & Hoogenboom, R. (2026) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2026.02.015
Tallet, L. (2019) · theses.fr (ABES) · doi:10.70675/3f7018d8z4102z43e7z8e95z367576a0d170 · Cited by 1
Farrell, R. H., Pezzoli, R., Devine, D. M., & Cortese, Y. J. (2026) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.70642
Pandey, D. S., Rahate, S., & Gokhale, K. M. (2026) · Biomedical Materials · doi:10.1088/1748-605x/aea3d5
Lu, X., Zan, R., Zhou, Y., Wang, H., Yang, S., Shen, S., Wang, K., Shu, M., Guo, Z., Gao, Y., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.79176
Metadata
- Authors
- Wang, B., Xu, Q., Ye, Z., Liu, H., Lin, Q., Nan, K., Li, Y., Wang, Y., Qi, L., & Chen, H.
- Affiliations
- Chinese Academy of Sciences (CN)
- Wenzhou Medical University (CN)
- Corresponding author
- Wang, Bailiang
- Chen, Hao
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-30
- Volume
- 8
- Issue
- 40
- Pages
- 27207-27217
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2523379390
- Cited by
- 130
- References
- 58
- Citations by year
- 2026: 6 · 2025: 7 · 2024: 14 · 2023: 14 · 2022: 13 · 2021: 18 · 2020: 19 · 2019: 17 · 2018: 12 · 2017: 10
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Wenzhou Municipal Science and Technology Bureau (2013S0458)
- National Natural Science Foundation of China (31570959, 51403158, 81271703)
- Natural Science Foundation of Zhejiang Province (LQ14C100002, LY12H12005)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- copolymer brushes, RAFT polymerization, N-isopropylacrylamide, quaternary ammonium compounds, PDMAEMA, thermoresponsive polymers, antifouling surfaces, bactericidal coatings, biofilm inhibition, bacterial adhesion, implant surface, hydrophilic-hydrophobic switching, bovine serum albumin adsorption, lens epithelial cells, biocompatibility
- MeSH terms
- Anti-Bacterial Agents, Biocompatible Materials, Humans, Polymers, Staphylococcus aureus, Surface Properties, Temperature
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.