The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Ultrasensitive Cracking-Assisted Strain Sensors Based on Silver Nanowires/Graphene Hybrid Particles
Abstract
Strain sensors with ultrahigh sensitivity under microstrain have numerous potential applications in heartbeat monitoring, pulsebeat detection, sound signal acquisition, and recognition. In this work, a two-part strain sensor (i.e., polyurethane part and brittle conductive hybrid particles layer on top) based on silver nanowires/graphene hybrid particles is developed via a simple coprecipitation, reduction, vacuum filtration, and casting process. Because of the nonuniform interface, weak interfacial bonding, and the hybrid particles' point-to-point conductive networks, the crack and overlap morphologies are successfully formed on the strain sensor after a prestretching; the crack-based stain sensor exhibits gauge factors as high as 20 (Δε < 0.3%), 1000 (0.3% < Δε < 0.5%), and 4000 (0.8% < Δε < 1%). In addition, we demonstrate the sensing mechanism under strain results in the high gauge factor of the strain sensor. Combined with its good response to bending, high strain resolution, and high working stability, the developed strain sensor is promising in the applications of electronic skins, motion sensors, and health monitoring sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system
Kang, D., Pikhitsa, P. V., Choi, Y. W., Lee, C., Shin, S. S., Piao, L., Park, B., Suh, K.-Y., Kim, T.-I., & Choi, M. (2014) · Nature · doi:10.1038/nature14002 · Cited by 1,626
Flexible organic transistors and circuits with extreme bending stability
Sekitani, T., Zschieschang, U., Klauk, H., & Someya, T. (2010) · Nature Materials · doi:10.1038/nmat2896 · Cited by 1,253
Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain Sensors
Yan, C., Wang, J., Kang, W., Cui, M., Wang, X., Foo, C. Y., Chee, K. J., & Lee, P. S. (2014) · Advanced Materials · doi:10.1002/adma.201304742 · Cited by 1,179
Sensitive, High-Strain, High-Rate Bodily Motion Sensors Based on Graphene–Rubber Composites
Boland, C. S., Khan, U., Backes, C., O’Neill, A., McCauley, J., Duane, S., Shanker, R., Liu, Y., Jurewicz, I., Dalton, A. B., et al. (2014) · ACS Nano · doi:10.1021/nn503454h · Cited by 793
Kim, K. K., Hong, S., Cho, H. M., Lee, J., Suh, Y. D., Ham, J., & Ko, S. H. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01505 · Cited by 626
Mogul‐Patterned Elastomeric Substrate for Stretchable Electronics
Lee, H., Bae, C., Duy, L. T., Sohn, I., Kim, D., Song, Y., Kim, Y., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201505218 · Cited by 130
Cited by
Graphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
Yin, R., Yang, S., Li, Q., Zhang, S., Liu, H., Han, J., Liu, C., & Shen, C. (2020) · Science Bulletin · doi:10.1016/j.scib.2020.02.020 · Cited by 322
Highly Stretchable Core–Sheath Fibers via Wet-Spinning for Wearable Strain Sensors
Tang, Z., Jia, S., Wang, F., Bian, C., Chen, Y., Wang, Y., & Li, B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18677 · Cited by 312
Chen, J., Zhang, J., Luo, Z., Zhang, J., Li, L., Su, Y., Gao, X., Li, Y., Tang, W., Cao, C., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04709 · Cited by 282
Xiang, D., Zhang, X., Li, Y., Harkin-Jones, E., Zheng, Y., Wang, L., Zhao, C., & Wang, P. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107250 · Cited by 268
Metadata
- Authors
- Chen, S., Wei, Y., Wei, S., Lin, Y., & Liu, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-13
- Volume
- 8
- Issue
- 38
- Pages
- 25563-25570
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2507969181
- Cited by
- 272
- References
- 7
- FWCI
- 12.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
