Multifunctional Wearable Device Based on Flexible and Conductive Carbon Sponge/Polydimethylsiloxane Composite
The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
Wearable devices that can be used to monitor personal health, track human motions, and provide thermotherapy, etc., are highly desired in personalized healthcare. In this work, a multifunctional wearable "wrist band" which works as both heater for thermotherapy and sensor for personal health and motion monitoring is fabricated from a flexible and conductive carbon sponge/polydimethylsiloxane (CS/PDMS) composite. The key functional material of the wrist band, namely, the conductive CS, is synthesized from waste paper by a freeze-drying and high-temperature pyrolysis process. When the wrist band works as a heater under 15 V, a stable temperature difference of 20 °C is achieved between the wrist band and the ambient. When the wrist band serves as a wearable strain sensor, the wrist band exhibits fast and repeatable response and excellent durability within the strain range of 0-20% and the working frequency of 0.01-10 Hz. Finally, the typical applications of the multifunctional wearable wrist band, as a heater for thermotherapy and a sensor for blood pulse, breathe, and walk monitoring, are demonstrated. Due to its low cost, high flexibility, moderate conductivity, and excellent strain sensibility, the as-prepared wearable device based on the CS/PDMS composite is promising to be applied for the provision of personal healthcare.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“On the skin, respiratory waves and pulses can also contribute to slight stretches, which can be captured by sensitive strainers for health monitoring during rehabilitation.[94,202,203]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [203]
In the citing paper
“Despite these issues, prosthetic actuation has repeatedly been shown to enhance rehabilitation recovery through assisted motion actuation[458] and heat therapy[203] after paralysis, muscle injury, or loss of limb.[459]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [203]
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
A review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Monitoring of Vital Signs with Flexible and Wearable Medical Devices
Khan, Y., Ostfeld, A. E., Lochner, C. M., Pierre, A., & Arias, A. C. (2016) · Advanced Materials · doi:10.1002/adma.201504366 · Cited by 1,408
Advances of flexible pressure sensors toward artificial intelligence and health care applications
Zang, Y., Zhang, F., Di, C.-A., & Zhu, D. (2015) · Materials Horizons · doi:10.1039/c4mh00147h · Cited by 1,272
Yao, H., Ge, J., Wang, C., Wang, X., Hu, W., Zheng, Z., Ni, Y., & Yu, S. (2013) · Advanced Materials · doi:10.1002/adma.201303041 · Cited by 1,137
Wearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring
Wang, Y., Wang, L., Yang, T., Li, X., Zang, X., Zhu, M., Wang, K., Wu, D., & Zhu, H. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400379 · Cited by 1,085
Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires
Yao, S., & Zhu, Y. (2014) · Nanoscale · doi:10.1039/c3nr05496a · Cited by 1,028
Cited by
Items 101–200 of 207
Oh, J., Kim, D., Kim, H., Hur, O.-N., & Park, S. H. (2022) · Materials · doi:10.3390/ma15217637 · Cited by 33
“Flexible pressure sensors attract considerable research efforts because of their significant application potential in the fields of electronic skin [1–4], robotics [5–7], and wearables [8,9].”
BackgroundMicro-/nano-structured flexible electronics for biomedical applications
Wang, Y., Guo, J., Xu, D., Gu, Z., & Zhao, Y. (2022) · Biomedical Technology · doi:10.1016/j.bmt.2022.11.013 · Cited by 35
Wang, Y., Wang, H., Wang, H., Zhang, M., Liang, X., Xia, K., & Zhang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04060 · Cited by 30
Chloride functionalized carbon nanotube sponge: High charge capacity and high magnetic saturation
Fajardo‐Díaz, J. L., Lopéz‐Urías, F., & Muñoz‐Sandoval, E. (2020) · Carbon · doi:10.1016/j.carbon.2020.04.016 · Cited by 30
High Voltage Microsupercapacitors Fabricated and Assembled by Laser Carving
Bai, S., Tang, Y. Z., Wu, Y., Liu, J., Liu, H., Yuan, W., Lu, L., Mai, W., Li, H., & Xie, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c11935 · Cited by 30
Gong, H., Cai, C., Gu, H., Jiang, Q., Zhang, D., & Cheng, Z. (2021) · RSC Advances · doi:10.1039/d0ra09070k · Cited by 31
Fiber-Based Thermoelectric Materials and Devices for Wearable Electronics
Zhang, P., Deng, B., Sun, W., Zheng, Z., & Liu, W. (2021) · Micromachines · doi:10.3390/mi12080869 · Cited by 31
A low-modulus, adhesive, and highly transparent hydrogel for multi-use flexible wearable sensors
Yu, D., Teng, Y., Zhou, N., Xu, Y., Wang, X., Lin, X., Wang, Q., & Xue, C. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130752 · Cited by 32
Kausar, A., Ahmad, I., Zhao, T., Aldaghri, O. A., Ibnaouf, K. H., & Eisa, M. H. (2023) · Crystals · doi:10.3390/cryst13071144 · Cited by 37
Xu, B., Ye, F., Chen, R., Luo, X., Xue, Z., Li, R., & Chang, G. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.09.351 · Cited by 33
Chen, L., Zhang, H., Mao, Z., Wang, B., Feng, X., & Sui, X. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119409 · Cited by 28
Chen, L., Hu, B., Gao, X. D., Chang, F., Yang, H., He, G., Cao, X., Zou, X., & Yin, X. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109790 · Cited by 29
Xu, X., Yuan, Y., Zhang, T., Li, K., Wang, S., Liang, C., & Zhu, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127664 · Cited by 27
Nakamaru, S., Nakayama, R., Niiyama, R., & Kakehi, Y. (2017) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/3126594.3126666 · Cited by 32
Fei, Y., Jiang, R., Fang, W., Liu, T., Saeb, M. R., Hejna, A., Ehsani, M., Barczewski, M., Sajadi, S. M., Chen, F., et al. (2022) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2022.105653 · Cited by 28
Xiang, H., Li, H., Chen, J., Sun, S., Li, Q., Yang, B., & Peng, X. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.051 · Cited by 27
Dielectric and Ultrasonic Properties of PDMS/TiO2 Nanocomposites
Vanskevičė, I., Kinka, M., Banys, J., Macutkevic, J., Schaefer, S., Selskis, A., Fierro, V., & Celzard, A. (2024) · Polymers · doi:10.3390/polym16050603 · Cited by 27
“PDMS composites were used in many other applications, including as a photocatalyst for water purification [30] and in various multifunctional wearable devices [31], strain-sensitive temperature sensors [32] and others.”
MethodWood, D. S., Jensen, K., Crane, A., Lee, H., Dennis, H. E., Gladwell, J., Shurtz, A. K., Fullwood, D. T., Seeley, M. K., Mitchell, U. H., et al. (2022) · Sensors · doi:10.3390/s22072499 · Cited by 24
Polyelectrolyte-based conductive hydrogels: from theory to applications
Fan, X., Chen, Z., Sun, H., Zeng, S., Liu, R., & Tian, Y. (2022) · Soft Science · doi:10.20517/ss.2022.09 · Cited by 27
Recent advances in MXene‐based flexible pressure sensors for medical monitoring
Zhang, X., Wang, B., Zhou, B., Lin, H., Liu, Y., Yang, F., Sun, S., Song, Q., & Wu, Q. Y. (2025) · Rare Metals · doi:10.1007/s12598-024-03157-y · Cited by 26
“In the field of personalized medicine, hyperthermia is widely recognized as a rapid, cost-effective method for pain relief [197, 198].”
Huang, X., Zhao, W. J., Zhu, C., Chen, X., Han, X., Xing, J., Bao, L., Meng, L., Shi, N. N., Gao, P., et al. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c04799 · Cited by 22
Turco, A., Monteduro, A. G., Montagna, F., Primiceri, E., Frigione, M., & Maruccio, G. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.09.065 · Cited by 22
Li, R., Gou, X., Lee, C. H., Ruan, H., Wang, X., Zhou, Z., Huang, X. H., Liu, Z., & Yang, P. (2023) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114211 · Cited by 26
Wang, Z., Chen, X., Zhang, J., Lin, Y., Li, K., Zeng, J. J., Wu, P., He, Y., Li, Y., & Wang, H. (2018) · AIP Advances · doi:10.1063/1.5032082 · Cited by 25
Self-citationKwon, G., Kim, S.-H., Kim, D., Lee, K., Jeon, Y., Park, C., & You, J. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117658 · Cited by 22
Stretchable multifunctional wearable system for real-time and on-demand thermotherapy of arthritis
Liu, Z., Wang, X., He, Y., Hong, W., Sun, P., Liu, W., Ye, D., Yang, Z., Wang, X., Wu, M., et al. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-00912-8 · Cited by 23
Duan, S., Wang, J., Lin, Y. Q., Hong, J., Lin, Y., Xia, Y., Li, Y., Zhu, D., Lei, W., Su, W., et al. (2022) · Nano Research · doi:10.1007/s12274-022-5077-9 · Cited by 21
Self-citationZhu, W., Wang, Y.-Y., Fan, T., Zhu, Y., Tang, Z., Huang, P., Li, Y., & Fu, S. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c00231 · Cited by 21
Self-citationZhang, N., Huang, C., Wan, S., Kang, L., Hu, M., Zhang, Y.-H., Wu, X. Y., & Zhang, J. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00109 · Cited by 20
Wang, Z., Tian, M., Yu, J., Jiao, J., Yang, C., Lü, P., Yan, C., & Fang, C. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106269 · Cited by 19
Highpoints of carbon nanotube nanocomposite sensors—A review
Kausar, A., & Ahmad, I. (2024) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2024.100419 · Cited by 19
Piezoresistive strain sensors based on psyllium-carbon nanostructure skeletons
Gong, X., Sang, Z., Guo, H., Ke, K., Manas‐Zloczower, I., & Feke, D. L. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108610 · Cited by 19
Pocketable and Smart Electrohydrodynamic Pump for Clothes
Kuwajima, Y., Yamaguchi, Y., Yamada, Y., Morita, T., Wiranata, A., Minaminosono, A., Hosoya, N., Kakehi, Y., & Maeda, S. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15274 · Cited by 22
Chai, Z., Sun, Y., He, Y., Su, Y., Liu, K., Jiang, L., & Heng, L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.161886 · Cited by 19
Babu, V. J., Anusha, M., Sireesha, M., Sundarrajan, S., Rashid, S. S. A. A. H., Kumar, A., & Ramakrishna, S. (2022) · Polymers · doi:10.3390/polym14112219 · Cited by 19
“capacitive [15,41–45], thermoelectric [46,47], piezoelectric (PE) [48–52], triboelectric [53–57], field-effect [32,58,59], and optical [60,61].”
BackgroundRamie Fabric Treated with Carboxymethylcellulose and Laser Engraved for Strain and Humidity Sensing
Shi, S., Jiao, L., Qu, C., Chen, S., & Sheng, B. (2022) · Micromachines · doi:10.3390/mi13081309 · Cited by 18
“Pyrolysis is a simple and effective method to carbonize the fabric in an oven and prepare highly flexible strain sensors [31,32].”
MethodGold@mesoporous polydopamine nanoparticles modified self-healing hydrogel for sport-injuring therapy
Zhou, Y., Xu, B., Zhou, P., Chen, X., Jiao, G., & Li, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127441 · Cited by 18
Wang, L., Xiang, D., Harkin‐Jones, E., Zhang, X., Li, Y., Zheng, Y., Zhao, C., & Wang, P. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900492 · Cited by 19
Self-citationHigh-performance epidermal strain sensor based on macro-defect graphene foams
Xu, M., Li, X., Jin, C., He, Z., & Zhang, Q. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.111721 · Cited by 18
Yang, L., Li, C., Pu, T., Ruan, Y., & Guo, T. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102375 · Cited by 17
Li, Y., Zhang, K., Nie, M., & Wang, Q. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b04783 · Cited by 17
Self-citationXiao, Z., Guo, R., He, X., Gan, Y., Zhang, J., Huang, H., Zhang, W., Wang, B., Han, Y., & Xia, Y. (2022) · Journal of Electronic Materials · doi:10.1007/s11664-022-09525-7 · Cited by 17
Nacre Mimetic with Embedded Silver Nanowire for Resistive Heating
Das, P., Yeo, C. K., Ma, J., Phan, K. D., Chen, P., Chan‐Park, M. B. E., & Duan, H. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.7b00348 · Cited by 17
Zheng, S., Du, R., Wang, N., Cao, M., Zhang, Y., Jiang, Y., Liu, Z., Yang, W. M., Yang, M., & Xia, X. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106649 · Cited by 17
Turco, A., Monteduro, A. G., Montagna, F., Primiceri, E., Frigione, M., & Maruccio, G. (2022) · Polymer · doi:10.1016/j.polymer.2022.125534 · Cited by 16
Development of a Wireless Robotic Arm Control System Using Piezoelectric Sensors and Neural Networks
Rodriguez-Labra, J. I., Narakathu, B. B., & Atashbar, M. Z. (2019) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors43011.2019.8956669 · Cited by 16
“Wearable devices are becoming center of attention due to wide range of applications for human activity evaluation and personal health monitoring [1-9].”
BackgroundVo, T. S., Nguyen, T. S., Lee, S.-H., & Kim, K. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.06.010 · Cited by 15
From wearables to implantables—clinical drive and technical challenges
Kassanos, P., Rosa, B. M. G., Keshavarz, M., & Yang, G. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819246-7.00002-4 · Cited by 21
Polymer-based wearable nano-composite sensors: a review
Tuli, A., & Singh, A. P. (2023) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2022.2161737 · Cited by 17
Injection Molding of Liquid Metal by Harnessing Nonstick Molds
Ma, J., Vaghani, D. P., Im, S., Kong, M., Shamsi, M., Wei, S., Vong, M. H., & Dickey, M. D. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c16692 · Cited by 15
Electrically-driven textiles using hierarchical aramid fiber
Li, Z., Islam, A., Khuje, S., & Ren, S. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108888 · Cited by 13
Topological design of strain sensing nanocomposites
Wang, L., Chiang, W., & Loh, K. J. (2022) · Scientific Reports · doi:10.1038/s41598-022-13393-w · Cited by 14
Song, K., Wang, X., Zhang, B., Li, J., Liu, P., Yang, R., & Wang, J. (2019) · ChemistrySelect · doi:10.1002/slct.201901546 · Cited by 13
Li, Y., Chen, Y., Yang, Y., Gu, J.-D., Ke, K., Yin, B., & Yang, M. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01441b · Cited by 12
Self-citationChen, F., Liu, X., Liu, H., Li, S., Li, S., Sun, T., Zhao, Y. M., & Wang, K. (2021) · High Performance Polymers · doi:10.1177/09540083211053742 · Cited by 12
Huang, P., Xiaoguang, Y., Li, Y., Fu, Y., Gan, D., Taha, T., Fu, Y., Hu, N., & Fu, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107631 · Cited by 12
Self-citationZhang, G., Chen, Y., Zhou, W., Chen, C., & Liu, Y. (2023) · Small Science · doi:10.1002/smsc.202300043 · Cited by 17
Chen, W., Hu, C., Zhang, N., Huang, T. K., & Zeng, Y. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.102584 · Cited by 12
Lee, S., Kang, K., Choi, H., Yoon, J., Kim, Y., An, S., Jung, H., Seong, D., Park, K., Baac, H., et al. (2021) · Applied Sciences · doi:10.3390/app11146562 · Cited by 11
Wei, W., Wu, M., & Chen, Y. (2023) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202200823 · Cited by 11
Shao, Z., Liu, Y., Cai, P., Wang, Q., Xiao, Z., Zhang, L., Tong, B., Wang, B., Zhao, Y. N., Zhang, W., et al. (2024) · Journal of Electronic Materials · doi:10.1007/s11664-024-11147-0 · Cited by 10
“26,27 Recently, scholars have proposed a variety of strategies that have improved the upper limit of the heating temperature of electrothermal composites.”
Zhang, H., Chen, Z., Wu, B., Ji, X., Tang, S., & Zhu, W. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.106020 · Cited by 11
Self-citationRobust Macroscopic 3D Sponges of Manganese Oxide Molecular Sieves
Liu, Z., Wu, D., Guo, X., Fang, S., Wang, L., Xing, Y., & Suib, S. L. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201702787 · Cited by 10
Toto, E., Laurenzi, S., & Santonicola, M. G. (2020) · Polymers · doi:10.3390/polym12102301 · Cited by 10
Shin, W. H., Kim, S., & Kim, S. Y. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104931 · Cited by 9
Turco, A., Monteduro, A. G., Montagna, F., Primiceri, E., Frigione, M., & Maruccio, G. (2022) · Nanomaterials · doi:10.3390/nano12213741 · Cited by 10
Towards a Flexible Wrist-Worn Thermotherapy and Thermoregulation Device
Kassanos, P., Florent Seichepine, A., Keshavarz, M., & Yang, G. (2019) · IEEE International Conference on Bioinformatics and Bioengineering (BIBE) · doi:10.1109/bibe.2019.00121 · Cited by 9
“The simplest approach is to use metal filaments similarly to RTDs, but nanomaterial composites, elastomers and other materials have also been proposed [4], [7], [8], [26].”
BackgroundMXene/air-laid paper composite sensors for both tensile and torsional deformations detection
Lin, C., Luo, S., Meng, F., Xu, B., Long, T., Zhao, Y., Hu, H., Zheng, L., Liao, K., & Liu, J. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100768 · Cited by 10
Self-citationTu, D., Xu, J., Yang, W., Shi, L., Chen, X., Li, Y., Yang, Y., & Gao, C. (2022) · Surfaces and Interfaces · doi:10.1016/j.surfin.2022.101873 · Cited by 9
Self-citationLee, S., Ung, S. C., & Kim, C.-L. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad3a43 · Cited by 8
Bioinspired, anti-fogging and de-icing transparent surfaces with flexible property
Liang, J., Yang, Q., Zhang, C., Tian, M., Meng, Y., Kai, L., Hu, T., Chen, S., & Chen, F. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102325 · Cited by 8
Selective Electronic NO2 Sensors Using a Polydimethylsiloxane Filter on WSe2 Devices
Zhang, S. N., Brothers, M. C., Sim, J. K., Ngo, Y. H., & Kim, S. S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00969 · Cited by 8
Li, Y., Zhang, K., Zhang, L., Nie, M., & Wang, Q. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108900 · Cited by 8
Self-citationA breathable, designable and flexible leather–heater used in wearable thermotherapy
Zhu, J., Liu, Y., Xie, R., Zhao, Y., Wang, F., Liu, Y. W. Q., Zha, B., Wu, J., & Huo, F. (2024) · Science China Technological Sciences · doi:10.1007/s11431-023-2623-1 · Cited by 8
Visualising the knowledge structure and evolution of wearable device research
Wang, C., & Qi, H. (2021) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2021.1891314 · Cited by 9
“The devices are often the wristbands [20], smartwatches [21], arm bands [22], shoes [23,24] and so on.”
BackgroundAppiagyei, A. B., & Han, J. I. (2021) · Sensors · doi:10.3390/s21072559 · Cited by 8
“Sensor devices represent one of the most influential parts of wearable device technology which has progressively gained attention from both academic and industrial applications [4,5].”
Zhou, J., Wenfei, W. A. N. G., Xie, J., Ding, S., Chen, Y., Xi, J., Guo, Y., & Chen, Y. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.122833 · Cited by 6
Zhou, X. H., Song, R., Wang, D. Y., Fang, C., Wang, Q., & Deng, J. (2021) · Polymer · doi:10.1016/j.polymer.2021.123873 · Cited by 6
Sensing Materials: Nanocomposites
Kausar, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822548-6.00048-0 · Cited by 7
All-optical in vivo photoacoustic tomography by adaptive multilayer acoustic backpropagation
Yoon, T., Ko, H., Im, J., Chung, E., Choi, W., & Lee, B. H. (2025) · Photoacoustics · doi:10.1016/j.pacs.2025.100753 · Cited by 5
“Among various materials considered — such as acrylic, glass, and quartz — we selected a PDMS plate for the cover layer due to its biocompatibility, mechanical flexibility [24,25], and proper acoustic impedance matching.”
Fan, J., Song, Y., Zhou, S., Li, H., Zuo, W., Fei, X., & Zhu, M. (2024) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2024.11.049 · Cited by 5
Huang, R., Yao, D., Sun, K., Liu, Q., Xu, Z., Lv, R., Ma, T., & Chen, J. (2024) · Journal of Luminescence · doi:10.1016/j.jlumin.2024.120902 · Cited by 4
Data management and visualization of wearable medical devices assisted by artificial intelligence
Zhao, M., Wang, D., & Li, J. (2021) · Network Modeling Analysis in Health Informatics and Bioinformatics · doi:10.1007/s13721-021-00328-0 · Cited by 4
“Wearable medical devices make the monitoring of patients' physical condition not limited to hospitals and other specific medical places, but give the flexibility of real-time monitoring to patients (Li 2016; Moulaei et al. 2021).”
BackgroundFlexible and Multifunctional Composites with Highly Strain Sensing and Impact Resistance Properties
Wang, S., Pu, J., Xu, S., Tian, Y., Shu, Q., Zou, R., & Zhang, T. (2024) · Polymers · doi:10.3390/polym16111544 · Cited by 4
“This may due to internal stress relaxation, ∆ R/R did not return to zero after each cycle in the piezoresistive sensor using PDMS as the elastomer [32,33].”
MethodHetero phase nanocomposite based posture sensor with stretchable connector-sensor interface
Zhang, A., Maly, J., & Ameri, S. K. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115811 · Cited by 5
Li, D., Zhou, J. W., Li, Y., Xue, W., Zhu, Z., & Wen, Y. (2022) · Carbon · doi:10.1016/j.carbon.2022.12.024 · Cited by 5
Self-citationLee, G.-S., Lee, G.-Y., & Lee, G.-Y. (2023) · Fibers and Polymers · doi:10.1007/s12221-023-00095-x · Cited by 4
Noh, J.-Y., & Kim, J. (2022) · Journal of the Korean Physical Society · doi:10.1007/s40042-022-00431-z · Cited by 4
Progress in electrical property measurements of micro-nano materials for smart wearable sensors
Cao, N., Liu, Y., Shen, F., Wu, C., & Zhang, D. (2025) · Measurement · doi:10.1016/j.measurement.2025.117863 · Cited by 3
Li, Y., Zhao, Y., Hu, D., & Li, Q. (2026) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5c07626 · Cited by 3
Self-citationMoradifard, A. H., Joshaghani, A. H., Mazaheri, H., Salimi, M., & Faghihi, K. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04878-3 · Cited by 3
“Also, this polymer will give unique properties to the final product due to its high flexibility, if placed in the adhesive chain structure [23].”
Shome, A., Rather, A. M., Borbora, A., Srikrishnarka, P., Baidya, A., Pradeep, T., & Manna, U. (2021) · Chemistry - An Asian Journal · doi:10.1002/asia.202100475 · Cited by 3
Zhu, W., Xue, S.-S., Zhang, H., Wang, Y.-Y., Huang, P., Tang, Z., Li, Y., & Fu, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4022067 · Cited by 3
Self-citationWu, J., Li, C., Wan, S., Shang, W., Tang, X., Ruan, Y., & Guo, T. (2026) · Applied Surface Science · doi:10.1016/j.apsusc.2026.166245 · Cited by 2
Liu, J., Ke, Z., Wang, Z., Zhou, Y., Yeoh, G. H., Carraro, C., Liao, G., Maboudian, R., Shi, T., & Long, H. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108566 · Cited by 2
Hou, W., & Zuckermann, G. (2020) · International Conference on Smart Electronics and Communication (ICOSEC) · doi:10.1109/icosec49089.2020.9215265 · Cited by 3
“The introduction of clus ter technology in process of migrat ion can effect ively reduce or even eliminate the downtime in the process of business system migrat ion, and realize the end-user's perception less migration [5-9].”
BackgroundWaterborne Polyurethanes Additive Technologies
Jain, P., & Raghav, S. (2021) · Advances in Science, Technology & Innovation/Advances in science, technology & innovation · doi:10.1007/978-3-030-72869-4_4 · Cited by 3
Tuli, A., Singh, A. P., & Kumar, A. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57175 · Cited by 1
Durability of medical composite systems
Shen, W., & Qhobosheane, R. G. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818260-4.00010-7 · Cited by 1
Nagamine, K., Sekine, T., & Tokito, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822548-6.00077-7
Metadata
- Authors
- Li, Y.-Q., Zhu, W.-B., Yu, X.-G., Huang, P., Fu, S.-Y., Hu, N., & Liao, K.
- Affiliations
- Chongqing University (CN)
- Khalifa University of Science and Technology (AE)
- Corresponding author
- Fu, Shao-Yun
- Liao, Kin
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-29
- Volume
- 8
- Issue
- 48
- Pages
- 33189-33196
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2551486358
- Semantic Scholar
- 5f8deb33b7b73b9c6cbe5faa355471927b1fd897
- Cited by
- 207
- References
- 35
- Citations by year
- 2026: 7 · 2025: 10 · 2024: 17 · 2023: 16 · 2022: 34 · 2021: 40 · 2020: 17 · 2019: 25 · 2018: 29 · 2017: 12
- FWCI
- 10.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Khalifa University of Science, Technology and Research (210038)
- National Natural Science Foundation of China (11372104, 11572321, 51373187, 51573200)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Non-Invasive Vital Sign Monitoring
- Keywords
- wearable devices, carbon sponge, polydimethylsiloxane composites, conductive materials, freeze-drying, wearable heaters, heat therapy, wearable strain sensors, respiratory monitoring, gait monitoring, health monitoring, flexible electronics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.