The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
A Review of the Fundamental Principles and Applications of Solution Blow Spinning
Open accessAbstract
Solution blow spinning (SBS) is a technique that can be used to deposit fibers in situ at low cost for a variety of applications, which include biomedical materials and flexible electronics. This review is intended to provide an overview of the basic principles and applications of SBS. We first describe a method for creating a spinnable polymer solution and stable polymer solution jet by manipulating parameters such as polymer concentration and gas pressure. This method is based on fundamental insights, theoretical models, and empirical studies. We then discuss the unique bundled morphology and mechanical properties of fiber mats produced by SBS, and how they compare with electrospun fiber mats. Applications of SBS in biomedical engineering are highlighted, showing enhanced cell infiltration and proliferation versus electrospun fiber scaffolds and in situ deposition of biodegradable polymers. We also discuss the impact of SBS in applications involving textiles and electronics, including ceramic fibers and conductive composite materials. Strategies for future research are presented that take advantage of direct and rapid polymer deposition via cost-effective methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Polymer Chemistry.
Huggins, M. L. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a090 · Cited by 16,550
Statistical mechanics of chain molecules
Flory, P. J., & Volkenstein, M. (1969) · Biopolymers · doi:10.1002/bip.1969.360080514 · Cited by 6,427
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Designing Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Zeng, W., Shu, L., Li, Q., Chen, S., Wang, F., & Tao, X. (2014) · Advanced Materials · doi:10.1002/adma.201400633 · Cited by 2,019
Electrospinning of Polymeric and Ceramic Nanofibers as Uniaxially Aligned Arrays
Li, D., Wang, Y., & Xia, Y. (2003) · Nano Letters · doi:10.1021/nl0344256 · Cited by 1,525
The entanglement concept in polymer rheology
Graessley, W. W. (2006) · Advances in Polymer Science · doi:10.1007/bfb0031037 · Cited by 1,340
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Shenoy, S. L., Bates, W. D., Frisch, H. L., & Wnek, G. E. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.011 · Cited by 1,209
Electrospun chitosan-based nanofibers and their cellular compatibility
Bhattarai, N., Edmondson, D., Veiseh, O., Matsen, F. A., & Zhang, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.027 · Cited by 898
Transport properties of porous membranes based on electrospun nanofibers
Gibson, P., Schreuder-Gibson, H., & Rivin, D. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00616-1 · Cited by 877
Baji, A., Mai, Y.-W., Wong, S.-C., Abtahi, M., & Chen, P. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.010 · Cited by 877
Solution blow spinning: A new method to produce micro‐ and nanofibers from polymer solutions
Medeiros, E. S., Glenn, G. M., Klamczynski, A. P., Orts, W. J., & Mattoso, L. H. C. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30275 · Cited by 780
Yetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752
Mechanical properties and Young's modulus of human skin in vivo
Agache, P. G., Monneur, C., Leveque, J. L., & De Rigal, J. (1980) · Archives of Dermatological Research · doi:10.1007/bf00406415 · Cited by 741
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Son, W. K., Youk, J. H., Lee, T. S., & Park, W. H. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.006 · Cited by 616
Nanofiber Assembly by Rotary Jet-Spinning
Badrossamay, M. R., McIlwee, H. A., Goss, J. A., & Parker, K. K. (2010) · Nano Letters · doi:10.1021/nl101355x · Cited by 518
Additive fabrication technologies applied to medicine and health care: a review
Giannatsis, J., & Dedoussis, V. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1308-1 · Cited by 389
The effect of nanofiber alignment on the maturation of engineered meniscus constructs
Baker, B. M., & Mauck, R. L. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.004 · Cited by 379
The elasticity of an individual fibrin fiber in a clot
Collet, J., Shuman, H., Ledger, R. E., Lee, S., & Weisel, J. W. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0504120102 · Cited by 294
(1997) · Springer eBooks · doi:10.1007/978-94-011-5854-1 · Cited by 280
Oliveira, J. E., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/409572 · Cited by 242
Fraley, S. I., Wu, P.-H., He, L., Feng, Y., Krisnamurthy, R., Longmore, G. D., & Wirtz, D. (2015) · Scientific Reports · doi:10.1038/srep14580 · Cited by 234
Direct in Vitro Electrospinning with Polymer Melts
Dalton, P. D., Klinkhammer, K., Salber, J., Klee, D., & Möller, M. (2006) · Biomacromolecules · doi:10.1021/bm050777q · Cited by 232
Polymer Nanofibers via Nozzle-Free Centrifugal Spinning
Weitz, R. T., Harnau, L., Rauschenbach, S., Burghard, M., & Kern, K. (2008) · Nano Letters · doi:10.1021/nl080124q · Cited by 231
Forming of Polymer Nanofibers by a Pressurised Gyration Process
Mahalingam, S., & Edirisinghe, M. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201300339 · Cited by 226
Srinivasan, S., Chhatre, S. S., Mabry, J. M., Cohen, R. E., & McKinley, G. H. (2011) · Polymer · doi:10.1016/j.polymer.2011.05.008 · Cited by 207
In Situ Deposition of PLGA Nanofibers via Solution Blow Spinning
Behrens, A. M., Casey, B. J., Sikorski, M. J., Wu, K. L., Tutak, W., Sandler, A. D., & Kofinas, P. (2014) · ACS Macro Letters · doi:10.1021/mz500049x · Cited by 205
Self-citationSolution blowing of chitosan/PVA hydrogel nanofiber mats
Liu, R., Xu, X., Zhuang, X., & Cheng, B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.056 · Cited by 185
The support of bone marrow stromal cell differentiation by airbrushed nanofiber scaffolds
Tutak, W., Sarkar, S., Lin-Gibson, S., Farooque, T. M., Jyotsnendu, G., Wang, D., Kohn, J., Bolikal, D., & Simon, C. G. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.12.020 · Cited by 169
Oliveira, J. E., Moraes, E. A., Costa, R. G. F., Afonso, A. S., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34410 · Cited by 162
A review on non-electro nanofibre spinning techniques
Stojanovska, E., Gokce, E. C., Pampal, E. S., Çalişir, M. D., Ağma, O., Polat, Y., Şimşek, R., Gundogdu, N. A. S., Akgül, Y., & Kılıç, A. (2016) · RSC Advances · doi:10.1039/c6ra16986d · Cited by 145
Bonan, R. F., Bonan, P. R. F., Batista, A. U. D., Sampaio, F. C., Albuquerque, A. D. J. D. R., Blassioli‐Moraes, M. C., Mattoso, L. H. C., Glenn, G. M., Medeiros, E. S. D., & de Oliveira, J. E. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.12.021 · Cited by 111
Solution Blowing of Soy Protein Fibers
Sinha‐Ray, S., Zhang, Y., Yarin, A. L., Davis, S. C., & Pourdeyhimi, B. (2011) · Biomacromolecules · doi:10.1021/bm200438v · Cited by 101
Sprayable Elastic Conductors Based on Block Copolymer Silver Nanoparticle Composites
Vural, M., Behrens, A. M., Ayyub, O. B., Ayoub, J. J., & Kofinas, P. (2014) · ACS Nano · doi:10.1021/nn505306h · Cited by 94
Self-citationSinha‐Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2010) · Carbon · doi:10.1016/j.carbon.2010.05.056 · Cited by 93
Nanofibers from Scalable Gas Jet Process
Benavides, R. E., Jana, S. C., & Reneker, D. H. (2012) · ACS Macro Letters · doi:10.1021/mz300297g · Cited by 86
Yuan, S., Li, Z., Song, L., Shi, H., Luan, S., & Yin, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06407 · Cited by 75
de Oliveira, J. E., de Moraes, E. A. B., Marconcini, J. M., Mattoso, L. H. C., Glenn, G. M., & Medeiros, E. S. D. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39061 · Cited by 73
Oliveira, J. E., Medeiros, E. S., Cardozo, L., Voll, F., Madureira, E. H., Mattoso, L. H. C., & Assis, O. B. G. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.10.032 · Cited by 70
Biodegradable‐Polymer‐Blend‐Based Surgical Sealant with Body‐Temperature‐Mediated Adhesion
Behrens, A. M., Lee, N. G., Casey, B. J., Srinivasan, P., Sikorski, M. J., Daristotle, J. L., Sandler, A. D., & Kofinas, P. (2015) · Advanced Materials · doi:10.1002/adma.201503691 · Cited by 66
Self-citationHsiao, H., Huang, C.-M., Hsu, M.-Y., & Chen, H. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.08.006 · Cited by 65
Bilbao-Sáinz, C., Chiou, B., Valenzuela‐Medina, D., Du, W., Gregorski, K. S., Williams, T., Wood, D. F., Glenn, G. M., & Orts, W. J. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.02.004 · Cited by 65
Khansari, S., Duzyer, S., Sinha‐Ray, S., Hockenberger, A., Yarin, A. L., & Pourdeyhimi, B. (2013) · Molecular Pharmaceutics · doi:10.1021/mp4003442 · Cited by 65
Sinha‐Ray, S., Sinha‐Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.02.026 · Cited by 60
Parize, D. D. D. S., de Oliveira, J. E., Mitsuyuki, M. C., Marconcini, J. M., & Mattoso, L. H. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43379 · Cited by 55
Больбасов, Е. Н., Stankevich, K. S., Sudarev, E. A., Bouznik, V. M., Kudryavtseva, V., Antonova, L. V., Матвеева, В. Г., Anissimov, Y. G., & Tverdokhlebov, S. I. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.07.041 · Cited by 54
Recent Advances in Nanoscale Bioinspired Materials
Demirel, M. C., Çetinkaya, M., Pena‐Francesch, A., & Jung, H. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201400324 · Cited by 53
Poly(lactic acid)/Carbon Nanotube Fibers as Novel Platforms for Glucose Biosensors
de Oliveira, J. E., Mattoso, L. H. C., Medeiros, E. S. D., & Zucolotto, V. (2012) · Biosensors · doi:10.3390/bios2010070 · Cited by 40
Solution-blown nanofiber mats from fish sarcoplasmic protein
Sett, S., Stephansen, K., & Yarin, A. L. (2016) · Polymer · doi:10.1016/j.polymer.2016.04.019 · Cited by 34
Hoffman, K. M., Škrtić, D., Sun, J., & Tutak, W. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0236 · Cited by 30
Nanofiber scaffolds influence organelle structure and function in bone marrow stromal cells
Tutak, W., Jyotsnendu, G., Bajcsy, P., & Simon, C. G. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33624 · Cited by 29
Behrens, A. M., Kim, J. J., Hotaling, N. A., Seppala, J. E., Kofinas, P., & Tutak, W. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/3/035001 · Cited by 29
Self-citationSolution blowing of activated carbon nanofibers for phenol adsorption
Tao, X., Zhou, G., Zhuang, X., Cheng, B., Li, X., & Li, H. (2014) · RSC Advances · doi:10.1039/c4ra10897c · Cited by 27
de Oliveira, J. E., Grassi, V., Scagion, V. P., Mattoso, L. H. C., Glenn, G. M., & Medeiros, E. S. D. (2012) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2226715 · Cited by 25
Kara, M. O. P., & Ekenseair, A. K. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35774 · Cited by 23
Kim, S. Y., Purnama, P., & Kim, S. H. (2010) · Macromolecular Research · doi:10.1007/s13233-010-1210-9 · Cited by 8
Cited by
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair
Tandon, B., Blaker, J. J., & Cartmell, S. H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.026 · Cited by 420
Jia, C., Li, L., Liu, Y., Fang, B., Ding, H., Song, J., Liu, Y., Xiang, K., Lin, S., Li, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17533-6 · Cited by 412
A review on electrospun polymeric nanofibers: Production parameters and potential applications
Ibrahim, H. M., & Klingner, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106647 · Cited by 402
Fibre-based composites from the integration of metal–organic frameworks and polymers
Peterson, G. W., Lee, D. T., Barton, H. F., Epps, T. H., & Parsons, G. N. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00291-2 · Cited by 301
Metadata
- Authors
- Daristotle, J. L., Behrens, A. M., Sandler, A. D., & Kofinas, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-14
- Volume
- 8
- Issue
- 51
- Pages
- 34951-34963
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2557305825
- Cited by
- 443
- References
- 60
- FWCI
- 8.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.