Nanofiber Assembly by Rotary Jet-Spinning
Open accessAbstract
High-voltage electrical fields and low production rate limit electrospinning, the electrical charging of polymer liquids, as a means of nanofiber fabrication. Here, we show a facile method of fabrication of aligned three-dimensional nanofiber structures by utilizing high-speed, rotating polymer solution jets to extrude fibers. Termed rotary jet-spinning, fiber morphology, diameter, and web porosity can be controlled by varying nozzle geometry, rotation speed, and polymer solution properties. We demonstrate the utility of this technique for tissue engineering by building anisotropic arrays of biodegradable polymer fibers and seeding the constructs with neonatal rat ventricular cardiomyocytes. The myocytes used the aligned fibers to orient their contractile cytoskeleton and to self-organize into a beating, multicellular tissue that mimics the laminar, anisotropic architecture of the heart muscle. This technique may prove advantageous for building uniaxially aligned nanofiber structures for polymers which are not amenable to fabrication by electrospinning.
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Rotary jet spinning produces fibers by centrifugal force pushing polymer solutions through a small orifice, and subsequent jet elongation results in free-floating single-micrometer fibers.
“Rotary jet spinning produces fibers by centrifugal force, pushing polymer solutions through a small orifice in the spinneret. Subsequent jet elongation results in free-floating single-micrometer fibers (29).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [29]
The paper’s process description (section labeled Abstract; page unavailable) says centrifugal and hydrostatic pressure propel polymer solution through an orifice, and jet stretching reduces its diameter. It reports fiber diameters of 50–3500 nm, which include roughly one micrometer, but does not describe the resulting fibers as free-floating; it says they were collected on a surrounding collector or coverslips. (LLM, conf=0.86)
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Cites
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Younan Xia, A. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,541 · see citing works
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,100 · see citing works
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,260 · see citing works
Rayleigh, L. (1878) · Proceedings of the London Mathematical Society · doi:10.1112/plms/s1-10.1.4 · Cited by 3,083 · see citing works
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,299 · see citing works
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,259 · see citing works
Nonlinear dynamics and breakup of free-surface flows
Eggers, J. (1997) · Reviews of Modern Physics · doi:10.1103/revmodphys.69.865 · Cited by 1,821 · see citing works
Shenoy, S. L., Bates, W. D., Frisch, H. L., & Wnek, G. E. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.011 · Cited by 1,216 · see citing works
Spinning Continuous Fibers for Nanotechnology
Dzenis, Y. A. (2004) · Science · doi:10.1126/science.1099074 · Cited by 1,110 · see citing works
Muscular Thin Films for Building Actuators and Powering Devices
Feinberg, A. W., Feigel, A., Shevkoplyas, S. S., Sheehy, S., Whitesides, G. M., & Parker, K. K. (2007) · Science · doi:10.1126/science.1146885 · Cited by 765 · see citing works
Self-citationElectrospinning of Nanofibers from Polymer Solutions and Melts
Reneker, D. H., Yarin, A. L., Zussman, E., & Xu, H. (2007) · Advances in applied mechanics · doi:10.1016/s0065-2156(07)41002-x · Cited by 636 · see citing works
Boland, E. D., Wnek, G. E., SIMPSON, D. L., Pawlowski, K. J., & Bowlin, G. L. (2001) · Journal of Macromolecular Science Part A · doi:10.1081/ma-100108380 · Cited by 464 · see citing works
The centrifugal microfluidic Bio-Disk platform
Ducrée, J., Haeberle, S., Lutz, S., Pausch, S., von Stetten, F., & Zengerle, R. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/7/s07 · Cited by 406 · see citing works
Putting Electrospun Nanofibers to Work for Biomedical Research
Xie, J., Li, X., & Younan Xia, A. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800381 · Cited by 384 · see citing works
Spraying asymmetry into functional membranes layer-by-layer
Krogman, K. C., Lowery, J. L., Zacharia, N. S., Rutledge, G. C., & Hammond, P. T. (2009) · Nature Materials · doi:10.1038/nmat2430 · Cited by 300 · see citing works
Polymer Nanofibers via Nozzle-Free Centrifugal Spinning
Weitz, R. T., Harnau, L., Rauschenbach, S., Burghard, M., & Kern, K. (2008) · Nano Letters · doi:10.1021/nl080124q · Cited by 231 · see citing works
Biohybrid thin films for measuring contractility in engineered cardiovascular muscle
Alford, P. W., Feinberg, A. W., Sheehy, S. P., & Parker, K. K. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.079 · Cited by 165 · see citing works
Self-citationOliveira, M. S. N., Yeh, R., & McKinley, G. H. (2006) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2006.01.014 · Cited by 163 · see citing works
Encyclopedia of Polymer Science and Technology
Martı́n, N. (2007) · Cited by 155 · see citing works
Wang, C., Chien, H., Yan, K.-W., Hung, C.-L., Hung, K.-L., Tsai, S., & Jhang, H.-J. (2009) · Polymer · doi:10.1016/j.polymer.2009.10.025 · Cited by 75 · see citing works
Multiple factor interactions in biomimetic mineralization of electrospun scaffolds
Madurantakam, P. A., Rodriguez, I. A., Cost, C. P., Viswanathan, R., Simpson, D. G., Beckman, M. J., Moon, P. C., & Bowlin, G. L. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.043 · Cited by 71 · see citing works
Living Scaffolds (Specialized and Unspecialized) for Regenerative and Therapeutic Medicine
Arumuganathar, S., & Jayasinghe, S. N. (2008) · Biomacromolecules · doi:10.1021/bm701322k · Cited by 36 · see citing works
Flagged first, then by citations
Research works printed but not linked: 4
- [8]Boland ED Wnek GE Simpson DG Pawlowski KJ Bowlin GL Journal of Macromolecular Science-Pure and Applied Chemistry 2001 38 12 1231 1243
- [14]Ducree J Haeberle S Lutz S Pausch S von Stetten F Zengerle R Journal of Micromechanics and Microengineering 2007 17 7 S103 S115
- [15]Oliveira MSN Yeh R McKinley GH Journal of Non-Newtonian Fluid Mechanics 2006 137 1–3 137 148
- [16]Lord R Proceedings of the London Mathematical Society 1878 s1–10 1 4 13
Cited by
Sorted by citations
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T. S., Dai, Y., & Younan Xia, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,074 · see citing works
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jeevanandam, J., Barhoum, A., Chan, Y. S., Dufresne, A., & Danquah, M. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.98 · Cited by 3,362 · see citing works
Industrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, Ç., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 973 · see citing works
Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825 · see citing works
Advances in three-dimensional nanofibrous macrostructures via electrospinning
Sun, B., Long, Y., Zhang, H., Li, M., Duvail, J., Jiang, X., & Yin, H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.002 · Cited by 790 · see citing works
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C., Stoyanov, S. D., Stride, E., Pelan, E. G., & Edirisinghe, M. J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 700 · see citing works
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 554 · see citing works
Sridhar, R., Lakshminarayanan, R., Madhaiyan, K., Barathi, V. A., Lim, K. H. C., & Ramakrishna, S. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00226a · Cited by 520 · see citing works
Poly(lactic acid) nanofibrous scaffolds for tissue engineering
Santoro, M., Shah, S. R., Walker, J. L., & Mikos, A. G. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.019 · Cited by 484 · see citing works
Barhoum, A., Pal, K., Rahier, H., Uludağ, H., Kim, I. S., & Bechelany, M. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.06.015 · Cited by 473 · see citing works
A Review of the Fundamental Principles and Applications of Solution Blow Spinning
Daristotle, J. L., Behrens, A. M., Sandler, A. D., & Kofinas, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12994 · Cited by 448 · see citing works
Nanotopography-guided tissue engineering and regenerative medicine
Kim, H. N., Jiao, A., Hwang, N. S.-Y., Kim, M. S., Kang, D. H., Kim, D., & Suh, K. Y. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.014 · Cited by 403 · see citing works
Centrifugal Spinning: An Alternative Approach to Fabricate Nanofibers at High Speed and Low Cost
Zhang, X., & Lu, Y. (2014) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2014.935858 · Cited by 393 · see citing works
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou‐Kandil, A. I. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 388 · see citing works
Recent advances in nanofibre fabrication techniques
Nayak, R., Padhye, R., Kyratzis, I. L., Truong, Y. B., & Arnold, L. (2011) · Textile Research Journal · doi:10.1177/0040517511424524 · Cited by 377 · see citing works
Green Electrospun Nanofibers and Their Application in Air Filtration
Lv, D., Zhu, M., Jiang, Z., Jiang, S., Zhang, Q., Xiong, R., & Huang, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800336 · Cited by 375 · see citing works
Ultragentle manipulation of delicate structures using a soft robotic gripper
Sinatra, N. R., Teeple, C. B., Vogt, D. M., Parker, K. K., Gruber, D. F., & Wood, R. J. (2019) · Science Robotics · doi:10.1126/scirobotics.aax5425 · Cited by 363 · see citing works
Self-citationCoaxial Electrospinning Formation of Complex Polymer Fibers and their Applications
Han, D., & Steckl, A. J. (2019) · ChemPlusChem · doi:10.1002/cplu.201900281 · Cited by 359 · see citing works
Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges
Bomkamp, C., Skaalure, S. C., Fernando, G. F., Arye, T. B., Swartz, E. W., & Specht, E. A. (2021) · Advanced Science · doi:10.1002/advs.202102908 · Cited by 357 · see citing works
Long, Y., Yu, M., Sun, B., Gu, C., & Fan, Z. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15335a · Cited by 317 · see citing works
Superabsorbent 3D Scaffold Based on Electrospun Nanofibers for Cartilage Tissue Engineering
Chen, W., Chen, S., Morsi, Y., El‐Hamshary, H., El-Newhy, M., Fan, C., & Mo, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06825 · Cited by 304 · see citing works
A materials-science perspective on tackling COVID-19
Tang, Z., Kong, N., Zhang, X., Liu, Y., Hu, P., Mou, S., Liljeström, P., Shi, J., Tan, W., Kim, J. S., et al. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00247-y · Cited by 302 · see citing works
Fibers for hearts: A critical review on electrospinning for cardiac tissue engineering
Κιτσαρά, Μ., Agbulut, O., Kontziampasis, D., Chen, Y., & Menasché, P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.014 · Cited by 284 · see citing works
High Strength and High Modulus Electrospun Nanofibers
Yao, J., Bastiaansen, C. W. M., & Peijs, T. (2014) · Fibers · doi:10.3390/fib2020158 · Cited by 271 · see citing works
Recent advancements in electrospinning design for tissue engineering applications: A review
Kishan, A. P., & Cosgriff‐Hernandez, E. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36124 · Cited by 259 · see citing works
Ou, R., Wei, J., Jiang, L., Simon, G. P., & Wang, H. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03418 · Cited by 254 · see citing works
Fabrication of scaffolds in tissue engineering: A review
Zhao, P., Gu, H., Mi, H., Rao, C., Fu, J., & Turng, L. (2017) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0496-8 · Cited by 247 · see citing works
Alignment of Cellulose Nanofibers: Harnessing Nanoscale Properties to Macroscale Benefits
Li, K., Clarkson, C. M., Wang, L., Liu, Y., Lamm, M. E., Pang, Z., Zhou, Y., Qian, J., Tajvidi, M., Gardner, D. J., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c07613 · Cited by 240 · see citing works
Saleem, H., Trabzon, L., Kılıç, A., & Zaidi, S. M. J. (2019) · Desalination · doi:10.1016/j.desal.2019.114178 · Cited by 237 · see citing works
Santos, D. M. D., Correa, D. S., Medeiros, E. S. D., de Oliveira, J. E., & Mattoso, L. H. C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c12410 · Cited by 237 · see citing works
Forming of Polymer Nanofibers by a Pressurised Gyration Process
Mahalingam, S., & Edirisinghe, M. J. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201300339 · Cited by 230 · see citing works
Scalable manufacturing and applications of nanofibers
Huang, Y., Song, J., Yang, C., Long, Y., & Wu, H. (2019) · Materials Today · doi:10.1016/j.mattod.2019.04.018 · Cited by 218 · see citing works
Muscle tissue engineering in fibrous gelatin: implications for meat analogs
MacQueen, L. A., Alver, C. G., Chantre, C. O., Ahn, S., Cera, L., Gonzalez, G. M., O’Connor, B. B., Drennan, D. J., Peters, M. M., Motta, S. E., et al. (2019) · npj Science of Food · doi:10.1038/s41538-019-0054-8 · Cited by 210 · see citing works
Self-citationAhn, S., Chantre, C. O., Gannon, A. R., Lind, J. U., Campbell, P. H., Grevesse, T., O’Connor, B. B., & Parker, K. K. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701175 · Cited by 209 · see citing works
Self-citationThe use of nanotechnology to increase quality and yield of fruit crops
Zahedi, S. M., Karimi, M., & da Silva, J. A. T. (2019) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.10004 · Cited by 206 · see citing works
Macrofibers with High Mechanical Performance Based on Aligned Bacterial Cellulose Nanofibers
Yao, J., Chen, S., Chen, Y., Wang, B., Pei, Q., & Wang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14650 · Cited by 205 · see citing works
Lu, Y., Li, Y., Zhang, S., Xu, G., Fu, K. K., Lee, H., & Zhang, X. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.09.017 · Cited by 196 · see citing works
Fibrous wound dressings encapsulating essential oils as natural antimicrobial agents
Liakos, I., Rizzello, L., Hajiali, H., Brunetti, V., Carzino, R., Pompa, P. P., Athanassiou, A., & Mele, E. (2015) · Journal of Materials Chemistry B · doi:10.1039/c4tb01974a · Cited by 189 · see citing works
Cellulose long fibers fabricated from cellulose nanofibers and its strong and tough characteristics
Kafy, A., Kim, H. C., Zhai, L., Kim, J. W., Hải, L. V., Kang, T. J., & Kim, J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17713-3 · Cited by 189 · see citing works
Haider, A., Haider, S., Kummara, M. R., Kamal, T., Alghyamah, A., Iftikhar, F. J., Bano, B., Khan, N., Afridi, M. A., Han, S. S., et al. (2020) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2020.01.002 · Cited by 189 · see citing works
Abdal‐hay, A., Sheikh, F. A., & Lim, J. K. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.09.017 · Cited by 186 · see citing works
Su, Z., Ding, J., & Wei, G. (2014) · RSC Advances · doi:10.1039/c4ra07848a · Cited by 178 · see citing works
ECM in Differentiation: A Review of Matrix Structure, Composition and Mechanical Properties
Padhi, A., & Nain, A. S. (2019) · Annals of Biomedical Engineering · doi:10.1007/s10439-019-02337-7 · Cited by 176 · see citing works
Engineering hybrid polymer-protein super-aligned nanofibers via rotary jet spinning
Badrossamay, M. R., Balachandran, K., Capulli, A. K., Golecki, H. M., Agarwal, A., Goss, J. A., Kim, H., Shin, K., & Parker, K. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.12.072 · Cited by 174 · see citing works
Self-citationRecent advances in core/shell bicomponent fibers and nanofibers: A review
Naeimirad, M., Zadhoush, A., Kotek, R., Neisiany, R. E., Khorasani, S. N., & Ramakrishna, S. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46265 · Cited by 172 · see citing works
A Review on the Electrospinning of Polymer Nanofibers and Its Biomedical Applications
Maran, B. A. V., Jeyachandran, S., & Kimura, M. (2024) · Journal of Composites Science · doi:10.3390/jcs8010032 · Cited by 162 · see citing works
Kim, J., Kim, D. H., Joo, S. H., Choi, B., Cha, A., Kim, K. M., Kwon, T., Kwak, S. K., Kang, S. J., & Jin, J. (2017) · ACS Nano · doi:10.1021/acsnano.7b02085 · Cited by 160 · see citing works
Deng, W., Sun, Y., Yao, X., Subramanian, K., Chen, L., Wang, H., Chopra, S. S., Xu, B. B., Wang, J., Chen, J., et al. (2021) · Advanced Science · doi:10.1002/advs.202102189 · Cited by 159 · see citing works
Incorporating small molecules or biologics into nanofibers for optimized drug release: A review
Sebe, I., Szabó, P., Kállai-Szabó, B., & Zelkó, R. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.08.054 · Cited by 147 · see citing works
Micropatterning Alginate Substrates for In Vitro Cardiovascular Muscle on a Chip
Agarwal, A., Farouz, Y., Nesmith, A. P., Deravi, L. F., McCain, M. L., & Parker, K. K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203319 · Cited by 146 · see citing works
Self-citationRecent advances in electrospun metal-oxide nanofiber based interfaces for electrochemical biosensing
Mondal, K., & Sharma, A. (2016) · RSC Advances · doi:10.1039/c6ra21477k · Cited by 145 · see citing works
Next generation of heart regenerative therapies: progress and promise of cardiac tissue engineering
Tenreiro, M. F., Louro, A. F., Alves, P. M., & Serra, M. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00140-4 · Cited by 145 · see citing works
A review on non-electro nanofibre spinning techniques
Stojanovska, E., Gokce, E. C., Pampal, E. S., Çalişir, M. D., Ağma, O., Polat, Y., Şimşek, R., Gundogdu, N. A. S., Akgül, Y., & Kılıç, A. (2016) · RSC Advances · doi:10.1039/c6ra16986d · Cited by 142 · see citing works
Cardiac tissue engineering: state-of-the-art methods and outlook
Nguyen, A. H., Marsh, P., Schmiess-Heine, L., Burke, P. J., Lee, A. P., Lee, J., & Cao, H. (2019) · Journal of Biological Engineering · doi:10.1186/s13036-019-0185-0 · Cited by 142 · see citing works
Advances in nanofibrous scaffolds for biomedical applications: From electrospinning to self-assembly
Wade, R. J., & Burdick, J. A. (2014) · Nano Today · doi:10.1016/j.nantod.2014.10.002 · Cited by 137 · see citing works
Three-dimensional printed electrospun fiber-based scaffold for cartilage regeneration
Chen, W., Xu, Y., Liu, Y., Wang, Z., Li, Y., Jiang, G., Mo, X., & Zhou, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107886 · Cited by 136 · see citing works
Fundamentals of electrospinning and processing technologies
Angammana, C. J., & Jayaram, S. H. (2015) · Particulate Science And Technology · doi:10.1080/02726351.2015.1043678 · Cited by 136 · see citing works
Rotary jet spinning review – a potential high yield future for polymer nanofibers
Rogalski, J. J., Bastiaansen, C. W. M., & Peijs, T. (2017) · Nanocomposites · doi:10.1080/20550324.2017.1393919 · Cited by 132 · see citing works
Recreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131 · see citing works
Self-citationBio-functional electrospun nanomaterials: From topology design to biological applications
Han, J., Xiong, L., Jiang, X., Yuan, X., Zhao, Y. S., & Yang, D. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.02.006 · Cited by 131 · see citing works
Fibrous scaffolds for building hearts and heart parts
Capulli, A. K., MacQueen, L. A., Sheehy, S. P., & Parker, K. K. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.11.020 · Cited by 130 · see citing works
Self-citationRen, L., Pandit, V., Elkin, J., Denman, T., Cooper, J. A., & Kotha, S. P. (2013) · Nanoscale · doi:10.1039/c3nr33423f · Cited by 125 · see citing works
A simple model for nanofiber formation by rotary jet-spinning
Mellado, P., McIlwee, H. A., Badrossamay, M. R., Goss, J. A., Mahadevan, L., & Parker, K. K. (2011) · Applied Physics Letters · doi:10.1063/1.3662015 · Cited by 123 · see citing works
Self-citationMedical applications and prospects of polylactic acid materials
Yang, Z., Yin, G., Sun, S., & Xu, P. (2024) · iScience · doi:10.1016/j.isci.2024.111512 · Cited by 123 · see citing works
de Farias, B. S., Cadaval, T. R. S., & Pinto, L. A. D. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.042 · Cited by 122 · see citing works
Electrospun fibrous sponge via short fiber for mimicking 3D ECM
Li, Y., Wang, J., Qian, D., Chen, L., Mo, X., Wang, L., Wang, Y., & Cui, W. (2021) · Journal of Nanobiotechnology · doi:10.1186/s12951-021-00878-5 · Cited by 122 · see citing works
Composite Nanofibers as Advanced Materials for Li-ion, Li-O2 and Li-S Batteries
Agubra, V., Zúñiga, L., Flores, D., Villarreal, J., & Alcoutlabi, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.012 · Cited by 119 · see citing works
Effect of Solvent Evaporation on Fiber Morphology in Rotary Jet Spinning
Golecki, H. M., Yuan, H., Glavin, C. E. Y., Potter, B., Badrossamay, M. R., Goss, J. A., Phillips, M. D., & Parker, K. K. (2014) · Langmuir · doi:10.1021/la5023104 · Cited by 114 · see citing works
Self-citationJetValve: Rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement
Capulli, A. K., Emmert, M. Y., Pasqualini, F. S., Kehl, D., Caliskan, E., Lind, J. U., Sheehy, S. P., Park, S. J., Ahn, S., Weber, B., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.04.033 · Cited by 112 · see citing works
Self-citationApproaching the in vitro clinical trial: engineering organs on chips
Capulli, A. K., Tian, K., Mehandru, N., Bukhta, A., Choudhury, S. F., Suchyta, M., & Parker, K. K. (2014) · Lab on a Chip · doi:10.1039/c4lc00276h · Cited by 111 · see citing works
Self-citationOverview of Nano-Fiber Mats Fabrication via Electrospinning and Morphology Analysis
Ahmadian, A., Shafiee, A., Aliahmad, N., & Agarwal, M. (2021) · Textiles · doi:10.3390/textiles1020010 · Cited by 111 · see citing works
Nanofibers from Melt Blown Fiber-in-Fiber Polymer Blends
Zuo, F., Tan, D. H., Wang, Z., Jeung, S., Macosko, C. W., & Bates, F. S. (2013) · ACS Macro Letters · doi:10.1021/mz400053n · Cited by 111 · see citing works
Alenezi, H., Çam, M. E., & Edirisinghe, M. J. (2019) · Applied Physics Reviews · doi:10.1063/1.5110965 · Cited by 110 · see citing works
Polymeric Nanofibers for Drug Delivery Applications: A Recent Review
Duan, X., Chen, H., & Guo, C. (2022) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-022-06700-4 · Cited by 110 · see citing works
Fiber Based Approaches as Medicine Delivery Systems
Sharifi, F. J., Sooriyarachchi, A., Altural, H., Montazami, R., Rylander, M. N., & Hashemi, N. N. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00281 · Cited by 107 · see citing works
Biomaterializing the promise of cardiac tissue engineering
Pomeroy, J. E., Helfer, A., & Bursac, N. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.02.009 · Cited by 107 · see citing works
Wang, Z., Nelson, J. K., Hillborg, H., Zhao, S., & Schadler, L. S. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.12.014 · Cited by 106 · see citing works
A review on electrospun bio-based polymers for water treatment
Mokhena, T. C., Jacobs, V., & Luyt, A. S. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.79 · Cited by 106 · see citing works
Graphene‐Based Nanocomposites as Antibacterial, Antiviral and Antifungal Agents
Er, S. G., Edirisinghe, M. J., & Tabish, T. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201523 · Cited by 104 · see citing works
Chantre, C. O., Campbell, P. H., Golecki, H. M., Tepole, A. B., Capulli, A. K., Deravi, L. F., Dauth, S., Sheehy, S. P., Paten, J. A., Gledhill, K., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.006 · Cited by 103 · see citing works
Self-citationSun, L., Gao, W., Fu, X., Shi, M., Xie, W., Zhang, W., Zhao, F., & Chen, X. (2017) · Biomaterials Science · doi:10.1039/c7bm00545h · Cited by 100 · see citing works
Electrospun anisotropic architectures and porous structures for tissue engineering
Sun, B., Jiang, X., Zhang, S., Zhang, J., Li, Y., You, Q.-Z., & Long, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00472a · Cited by 99 · see citing works
Highly porous fibers prepared by centrifugal spinning
Hou, T., Li, X., Lu, Y., & Yang, B. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.11.019 · Cited by 97 · see citing works
Thermoplastic-Toughened High-Temperature Cyanate Esters and Their Application in Advanced Composites
Inamdar, A., Gopinathapanicker, J. C., Anoop Anand, K., & Kandasubramanian, B. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b05202 · Cited by 96 · see citing works
Marano, S., Barker, S. A., Raimi‐Abraham, B. T., Missaghi, S., Rajabi‐Siahboomi, A. R., & Craig, D. Q. M. (2016) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2016.03.021 · Cited by 95 · see citing works
Mussel-inspired 3D fiber scaffolds for heart-on-a-chip toxicity studies of engineered nanomaterials
Ahn, S., Ardoña, H. A. M., Lind, J. U., Eweje, F., Kim, S. L., Gonzalez, G. M., Liu, Q., Zimmerman, J. F., Pyrgiotakis, G., Zhang, Z., et al. (2018) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-018-1106-7 · Cited by 95 · see citing works
Self-citationRecent Advances on Classification, Properties, Synthesis, and Characterization of Nanomaterials
Singh, V., Yadav, P., & Mishra, V. (2020) · Wiley eBooks · doi:10.1002/9781119576785.ch3 · Cited by 94 · see citing works
Ren, L., Ozisik, R., Kotha, S. P., & Underhill, P. T. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00292 · Cited by 93 · see citing works
Loordhuswamy, A. M., Krishnaswamy, V. R., Korrapati, P. S., Thinakaran, S., & Rengaswami, G. D. V. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.06.011 · Cited by 92 · see citing works
Huang, Z., Wang, D., Sønderskov, S. M., Xia, D., Wu, X., Liang, C., & Dong, M. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-01922-2 · Cited by 91 · see citing works
Recently developed electrospinning methods: a review
Ravandi, S. A. H., Sadrjahani, M., Valipouri, A., Dabirian, F., & Ko, F. (2022) · Textile Research Journal · doi:10.1177/00405175211069880 · Cited by 87 · see citing works
Nanofibers from Scalable Gas Jet Process
Benavides, R. E., Jana, S. C., & Reneker, D. H. (2012) · ACS Macro Letters · doi:10.1021/mz300297g · Cited by 86 · see citing works
Recent progress in electrospun nanofibers: Reinforcement effect and mechanical performance
Mohammadzadehmoghadam, S., Dong, Y., & Davies, I. J. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23762 · Cited by 86 · see citing works
Zhao, G., Zhang, X., Li, B., Huang, G., Xu, F., & Zhang, X. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01682 · Cited by 86 · see citing works
Recent Advances in Centrifugal Spinning and Their Applications in Tissue Engineering
Marjuban, S. M. H., Rahman, M., Duza, S. S., Ahmed, M. B., Patel, D. K., Rahman, M. S., & Lozano, K. (2023) · Polymers · doi:10.3390/polym15051253 · Cited by 86 · see citing works
Kandasubramanian, B., & Kodam, K. M. (2014) · RSC Advances · doi:10.1039/c4ra09425e · Cited by 86 · see citing works
Lu, Y., Fu, K. K., Zhang, S., Li, Y., Chen, C., Zhu, J., Yanılmaz, M., Dirican, M., & Zhang, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.130 · Cited by 84 · see citing works
Multifunctional electrospun nanofibrous membrane: An effective method for water purification
Cao, W., Zhang, M., Ma, W., & Huang, C. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124952 · Cited by 84 · see citing works
Nanofibrous scaffolds for biomedical applications
Stocco, T. D., Bassous, N. J., Zhao, S., Granato, A. E. C., Webster, T. J., & Lobo, A. O. (2018) · Nanoscale · doi:10.1039/c8nr02002g · Cited by 84 · see citing works
Improving fiber alignment during electrospinning
Yuan, H., Zhou, Q., & Zhang, Y. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100907-9.00006-4 · Cited by 83 · see citing works
- Authors
- Badrossamay, M. R., McIlwee, H. A., Goss, J. A., & Parker, K. K.
- Affiliations
- Harvard University (US)
- Corresponding author
- Parker, Kevin Kit
- ORCID
- Parker, Kevin Kit
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-05-21
- Volume
- 10
- Issue
- 6
- Pages
- 2257-2261
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- PMC
- PMC3704151
- OpenAlex
- W2140461693
- Cited by
- 518
- References
- 22
- Citations by year
- 2026: 14 · 2025: 22 · 2024: 26 · 2023: 22 · 2022: 41 · 2021: 48 · 2020: 47 · 2019: 51 · 2018: 36 · 2017: 35 · 2016: 44 · 2015: 29 · 2014: 42 · 2013: 26 · 2012: 16
- FWCI
- 8.06
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Licence
- Locations
- Nano Letters (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Heart, Lung, and Blood Institute (U01HL100408, R01HL079126)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Materials Science › Biomaterials › Supramolecular Self-Assembly in Materials
- Keywords
- rotary jet spinning, nanofiber fabrication, fiber diameter control, nozzle geometry, tissue engineering, cardiomyocytes, cardiac tissue engineering
- MeSH terms
- Animals, Animals, Newborn, Biocompatible Materials, Heart Ventricles, Rats, Nanofibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
