Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 174

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Microwave-Initiated Facile Formation of Ni3Se4 Nanoassemblies for Enhanced and Stable Water Splitting in Neutral and Alkaline Media

Anantharaj, Sengeni, Kennedy, Jeevarathinam, Kundu, Subrata·2017·ACS Applied Materials & Interfaces

Abstract

Molecular hydrogen (H 2 ) generation through water splitting with minimum energy loss has become practically possible due to the recent evolution of high-performance electrocatalysts. In this study, we fabricated, evaluated, and presented such a high-performance catalyst which is the Ni 3 Se 4 nanoassemblies that can efficiently catalyze water splitting in neutral and alkaline media. A hierarchical nanoassembly of Ni 3 Se 4 was fabricated by functionalizing the surface-cleaned Ni foam using NaHSe solution as the Se source with the assistance of microwave irradiation (300 W) for 3 min followed by 5 h of aging at room temperature (RT). The fabricated Ni 3 Se 4 nanoassemblies were subjected to catalyze water electrolysis in neutral and alkaline media. For a defined current density of 50 mA cm –2, the Ni 3 Se 4 nanoassemblies required very low overpotentials for the oxygen evolution reaction (OER), viz., 232, 244, and 321 mV at pH 14.5, 14.0, and 13.0 respectively. The associated lower Tafel slope values (33, 30, and 40 mV dec –1 ) indicate the faster OER kinetics on Ni 3 Se 4 surfaces in alkaline media. Similarly, in the hydrogen evolution reaction (HER), for a defined current density of 50 mA cm –2, the Ni 3 Se 4 nanoassemblies required low overpotentials of 211, 206, and 220 mV at pH 14.5, 14.0, and 13.0 respectively. The Tafel slopes for HER at pH 14.5, 14.0, and 13.0 are 165, 156, and 128 mV dec –1, respectively. A comparative study on both OER and HER was carried out with the state-of-the-art RuO 2 and Pt under identical experimental conditions, the results of which revealed that our Ni 3 Se 4 is a far better high-performance catalyst for water splitting. Besides, the efficiency of Ni 3 Se 4 nanoassemblies in catalyzing water splitting in neutral solution was carried out, and the results are better than many previous reports. With these amazing advantages in fabrication method and in catalyzing water splitting at various pH, the Ni 3 Se 4 nanoassemblies can be an efficient, cheaper, nonprecious, and high-performance electrode for water electrolysis with low overpotentials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.6b15980

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 174

Metadata

Authors
Anantharaj, S., Kennedy, J., & Kundu, S.
Venue
ACS Applied Materials & Interfaces
Published
2017-02-28
Volume
9
Issue
10
Pages
8714-8728
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2591070449
Cited by
174
References
10
FWCI
5.41
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.