The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Lithium-Salt-Rich PEO/Li0.3La0.557TiO3 Interpenetrating Composite Electrolyte with Three-Dimensional Ceramic Nano-Backbone for All-Solid-State Lithium-Ion Batteries
Abstract
Solid electrolytes with high ionic conductivity and good mechanical properties are required for solid-state lithium-ion batteries. In this work, we synthesized composite polymer electrolytes (CPEs) with a three-dimensional (3D) Li 0.33 La 0.557 TiO 3 (LLTO) network as a nano-backbone in poly(ethylene oxide) matrix by hot-pressing and quenching. Self-standing 3D-CPE membranes were obtained with the support of the LLTO nano-backbone. These membranes had much better thermal stability and enhanced mechanical strength in comparison with solid polymer electrolytes. The influence of lithium (Li) salt concentration on the conductivity of 3D-CPEs was systematically studied, and an ionic conductivity as high as 1.8 × 10 –4 S·cm –1 was achieved at room temperature. The electrochemical window of the 3D-CPEs was 4.5 V vs Li/Li + . More importantly, the 3D-CPE membranes could suppress the growth of Li dendrite and reduce polarization; therefore, a symmetric Li|3D-CPE|Li cell with these membranes was cycled at a current density of 0.1 mA·cm –2 for over 800 h. All of the superior properties above made the 3D-CPEs with the LLTO nano-backbone a promising electrolyte candidate for flexible solid-state lithium-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Electrical conductivity in ionic complexes of poly(ethylene oxide)
Wright, P. V. (1975) · British Polymer Journal · doi:10.1002/pi.4980070505 · Cited by 1,288
Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires
Liu, W., Lee, S. W., Lin, D., Shi, F., Wang, S., Sendek, A. D., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.35 · Cited by 1,103
Zhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Self-citationLin, D., Liu, W., Liu, Y., Lee, H. R., Hsu, P.-C., Liu, K., & Cui, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04117 · Cited by 1,012
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Review on composite polymer electrolytes for lithium batteries
Manuel Stephan, A., & Nahm, K. S. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.069 · Cited by 971
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Fire-extinguishing organic electrolytes for safe batteries
Wang, J., Yamada, Y., Sodeyama, K., Watanabe, E., Takada, K., Tateyama, Y., & Yamada, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0033-8 · Cited by 907
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Self-citationZhang, J., Zhao, N., Zhang, M., Li, Y., Chu, P. K.-H., Guo, X., Di, Z., Wang, X., & Li, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.002 · Cited by 818
Self-citationBae, J., Li, Y., Zhang, J., Zhou, X., Zhao, F., Shi, Y., Goodenough, J. B., & Yu, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710841 · Cited by 656
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Self-citationZeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Liu, W., Lin, D., Sun, J., Zhou, G., & Cui, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b06797 · Cited by 443
Zhang, J., Zang, X., Wen, H., Dong, T., Chai, J., Li, Y., Chen, B., Zhao, J., Dong, S., Ma, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10066j · Cited by 430
Yang, T., Zheng, J., Cheng, Q., Hu, Y.-Y., & Chan, C. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03806 · Cited by 425
An overview of the research and development of solid polymer electrolyte batteries
Murata, K., Izuchi, S., & Yoshihisa, Y. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00365-5 · Cited by 411
Zhu, P., Yan, C., Dirican, M., Zhu, J., Zang, J., Selvan, R. K., Chung, C.-C., Jia, H., Li, Y., Kiyak, Y., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10517g · Cited by 356
Self-citationJacob, M. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00422-0 · Cited by 214
Cui, Y., Liang, X., Chai, J., Cui, Z., Wang, Q., He, W., Liu, X., Liu, Z., Cui, G., & Feng, J. (2017) · Advanced Science · doi:10.1002/advs.201700174 · Cited by 210
Liu, T., Ren, Y., Shen, Y., Zhao, S.-X., Lin, Y., & Nan, C.-W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.111 · Cited by 179
Self-citationChen, R.-J., Zhang, Y.-B., Liu, T., Xu, B.-Q., Lin, Y.-H., Nan, C.-W., & Shen, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16304 · Cited by 176
Self-citationStructure–Conductivity Relationship for Peptoid-Based PEO–Mimetic Polymer Electrolytes
Sun, J., Stone, G. M., Balsara, N. P., & Zuckermann, R. N. (2012) · Macromolecules · doi:10.1021/ma300775b · Cited by 160
Lithiation-Derived Repellent toward Lithium Anode Safeguard in Quasi-solid Batteries
Zeng, X., Yin, Y., Shi, Y., Zhang, X., Yao, H., Wen, R., Wu, X., & Guo, Y. (2018) · Chem · doi:10.1016/j.chempr.2017.12.003 · Cited by 75
Self-citationHe, D., Cho, S. Y., Kim, D. W., Lee, C., & Kang, Y. (2012) · Macromolecules · doi:10.1021/ma3016745 · Cited by 70
Cited by
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Self-citationZheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries
Zhou, Q., Ma, J., Dong, S., Li, X., & Cui, G. (2019) · Advanced Materials · doi:10.1002/adma.201902029 · Cited by 973
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Metadata
- Authors
- Wang, X., Zhang, Y., Zhang, X., Liu, T., Lin, Y.-H., Li, L., Shen, Y., & Nan, C.-W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-04
- Volume
- 10
- Issue
- 29
- Pages
- 24791-24798
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2810215915
- Cited by
- 255
- References
- 36
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.