The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Flexible Room-Temperature NH3 Sensor for Ultrasensitive, Selective, and Humidity-Independent Gas Detection
Abstract
Ammonia (NH 3 ) is an irritant gas with a unique pungent odor; sub-parts per million-level breath ammonia is a medical biomarker for kidney disorders and Helicobacter pylori bacteria-induced stomach infections. The humidity varies in both ambient environment and exhaled breath, and thus humidity dependence of gas-sensing characteristics is a great obstacle for real-time applications. Herein, flexible, humidity-independent, and room-temperature ammonia sensors are fabricated by the thermal evaporation of CuBr on a polyimide substrate and subsequent coating of a nanoscale moisture-blocking CeO 2 overlayer by electron-beam evaporation. CuBr sensors coated with a 100 nm-thick CeO 2 overlayer exhibits an ultrahigh response (resistance ratio) of 68 toward 5 ppm ammonia with excellent gas selectivity, rapid response, reversibility, and humidity-independent sensing characteristics at room temperature. In addition, the sensing performance remains stable after repetitive bending and long-term operation. Moreover, the sensors exhibit significant response to the simulated exhaled breath of patients with H. pylori infection; the simulated breath contains 50 ppb NH 3 . The sensors thus show promising potential in detecting sub-parts per million-level NH 3, regardless of humidity fluctuations, which can open up new applications in wearable devices for in situ medical diagnosis and indoor/outdoor environment monitoring.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the human health impact of airborne particulate matter
Kim, K.-H., Kabir, E., & Kabir, S. (2015) · Environment International · doi:10.1016/j.envint.2014.10.005 · Cited by 2,954
Ammonia sensors and their applications—a review
Timmer, B., Olthuis, W., & Berg, A. V. D. (2005) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2004.11.054 · Cited by 1,714
Fiber-Optic Chemical Sensors and Biosensors
Wolfbeis, O. S. (2006) · Analytical Chemistry · doi:10.1021/ac060490z · Cited by 1,627
Sensing Behavior of Atomically Thin-Layered MoS2 Transistors
Late, D. J., Huang, Y.-K., Liu, B., Acharya, J., Shirodkar, S. N., Luo, J., Yan, A., Charles, D., Waghmare, U. V., Dravid, V. P., et al. (2013) · ACS Nano · doi:10.1021/nn400026u · Cited by 1,374
Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors
McAlpine, M. C., Ahmad, H., Wang, D., & Heath, J. R. (2007) · Nature Materials · doi:10.1038/nmat1891 · Cited by 959
Human exhaled air analytics: biomarkers of diseases
Buszewski, B., Kęsy, M., Ligor, T., & Amann, A. (2007) · Biomedical Chromatography · doi:10.1002/bmc.835 · Cited by 792
Flexible Graphene-Based Wearable Gas and Chemical Sensors
Singh, E., Meyyappan, M., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07063 · Cited by 776
High‐Performance Sensors Based on Molybdenum Disulfide Thin Films
Lee, K., Gatensby, R., McEvoy, N., Hallam, T., & Duesberg, G. S. (2013) · Advanced Materials · doi:10.1002/adma.201303230 · Cited by 499
Photoresponsive and Gas Sensing Field-Effect Transistors based on Multilayer WS2 Nanoflakes
Huo, N., Yang, S., Wei, Z., Li, S.-S., Xia, J.-B., & Li, J. (2014) · Scientific Reports · doi:10.1038/srep05209 · Cited by 436
Kim, H.-R., Haensch, A., Kim, I., Bârsan, N., Weimar, U., & Lee, J. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101154 · Cited by 419
Self-citation
Cited by
Li, Z., Li, H., Wu, Z., Wang, M., Luo, J., Torun, H., Hu, P., Yang, C., Grundmann, M., Liu, X., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01365a · Cited by 760
Self-citationWang, D., Zhang, D., Yang, Y., Mi, Q., Zhang, J., & Yu, L. (2021) · ACS Nano · doi:10.1021/acsnano.0c09015 · Cited by 687
Paper-Based Sensors for Gas, Humidity, and Strain Detections: A Review
Tai, H., Duan, Z., Wang, Y., Wang, S., & Jiang, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06435 · Cited by 441
Recent advances in nanostructured heterogeneous catalysts for N-cycle electrocatalysis
Liang, J., Liu, Q., Alshehri, A. A., & Sun, X. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120010 · Cited by 415
Evolution of breath analysis based on humidity and gas sensors: Potential and challenges
Tai, H., Wang, S., Duan, Z., & Jiang, Y. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128104 · Cited by 412
MOF‐Based Chemiresistive Gas Sensors: Toward New Functionalities
Jo, Y., Jo, Y. K., Lee, J., Jang, H. W., Hwang, I., & Yoo, D. J. (2023) · Advanced Materials · doi:10.1002/adma.202206842 · Cited by 410
Self-citationZhang, D., Yang, Z., Li, P., Pang, M., & Xue, Q. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103974 · Cited by 405
Recent Progress on Flexible Room-Temperature Gas Sensors Based on Metal Oxide Semiconductor
Ou, L.-X., Liu, M.-Y., Zhu, L.-Y., Zhang, D. W., & Lu, H.-L. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00956-9 · Cited by 402
Reviews of wearable healthcare systems: Materials, devices and system integration
Lou, Z., Wang, L., Jiang, K., Wei, Z., & Shen, G. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2019.100523 · Cited by 385
Diversiform metal oxide-based hybrid nanostructures for gas sensing with versatile prospects
Zhang, D., Yang, Z., Yu, S., Mi, Q., & Pan, Q. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213272 · Cited by 347
MXene/SnO2 heterojunction based chemical gas sensors
He, T., Liu, W., Lv, T., Ma, M., Liu, Z., Vasiliev, A., & Li, X. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.129275 · Cited by 335
Li, W., Jin, X., Han, X., Li, Y., Wang, W., Lin, T., & Zhu, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c22938 · Cited by 291
Smart Gas Sensors: Recent Developments and Future Prospective
Zong, B., Wu, S., Yang, Y., Li, Q., Tao, T., & Mao, S. (2025) · Nano-Micro Letters · doi:10.1007/s40820-024-01543-w · Cited by 282
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
Stability of Metal Oxide Semiconductor Gas Sensors: A Review
Chai, H., Zheng, Z., Liu, K., Xu, J., Wu, K., Luo, Y., Liao, H., Debliquy, M., & Zhang, C. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3148264 · Cited by 277
Asri, M. I. A., Hasan, M. N., Fuaad, M. R. A., Yunos, Y. M., & Ali, M. S. M. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3091854 · Cited by 269
Breath VOC analysis and machine learning approaches for disease screening: a review
P, H., Rangarajan, M., & Pandya, H. J. (2023) · Journal of Breath Research · doi:10.1088/1752-7163/acb283 · Cited by 37
Metadata
- Authors
- Li, H.-Y., Lee, C.-S., Kim, D. H., & Lee, J.-H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-27
- Volume
- 10
- Issue
- 33
- Pages
- 27858-27867
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2883061794
- Cited by
- 310
- References
- 44
- FWCI
- 8.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.