The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape
Abstract
Two-dimensional lattice structures with specific geometric features have been reported to have a negative Poisson's ratio, termed as auxetic metamaterials, that is, stretching-induced expansion in the transversal direction. In this paper, we designed a novel auxetic metamaterial; by utilizing the shape memory effect of the constituent materials, the in-plane moduli and Poisson's ratios can be continuously tailored. During deformation, the curved meshes ensure the rotation of the mesh joints to achieve auxetics. The rotations of these mesh joints are governed by the mesh curvature, which continuously changes during deformation. Because of the shape memory effect, the mesh curvature after printing can be programmed, which can be used to tune the rotation of the mesh joints and the mechanical properties of auxetic metamaterial structures, including Poisson's ratios, moduli, and fracture strains. Using the finite element method, the deformation of these auxetic meshes was analyzed. Finally, we designed and fabricated gradient/digital patterns and cylindrical shells and used the auxetics and shape memory effects to reshape the printed structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism
Huang, W. M., Yang, B., An, L., Li, C., & Chan, Y. S. (2005) · Applied Physics Letters · doi:10.1063/1.1880448 · Cited by 616
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Self-citationPattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Cited by
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004226 · Cited by 319
Metadata
- Authors
- Lei, M., Hong, W., Zhao, Z., Hamel, C., Chen, M., Lu, H., & Qi, H. J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-29
- Volume
- 11
- Issue
- 25
- Pages
- 22768-22776
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2947195308
- Cited by
- 245
- References
- 5
- FWCI
- 16.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape. https://app.cochat.ai/papers/10.1021/acsami.9b06081
- The paper
- Lei, M., Hong, W., Zhao, Z., Hamel, C., Chen, M., Lu, H., & Qi, H. J. (2019). 3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b06081
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.