Multiblock Copolymers for Recycling Polyethylene–Poly(ethylene terephthalate) Mixed Waste
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Plastic pollution is one of the most pressing global environmental issues we face today, in part due to the continued rise in production and use of disposable plastic products. Polyolefins and polyesters are two of the most prevalent polymers in the world accounting for ∼80% of total nonfiber plastic production. Recycling, despite being intrinsically environmentally friendly and sometimes economically viable, remains at a surprisingly low level (<9% in the U.S.) with most plastic waste ending up in landfills. One reason for this low rate of recycling stems from the challenge of recycling mixed waste streams and multicomponent plastics. In mixed waste streams, physical presorting of components prior to recycling requires significant effort, which translates to added cost. For multicomponent plastics (e.g., multilayer films such as food wrappers), the individual plastic components cannot be efficiently physically separated, and they are immiscible with poor interfacial adhesion when melt reprocessed. Thus, direct recycling of mixed plastics by melt reprocessing results in products that lack desired end-use properties. In this study, we describe the synthesis of novel poly(ethylene terephthalate)-polyethylene multiblock copolymers (PET-PE MBCPs) and evaluate their utility as adhesive tie layers in multilayer films and compatibilizer additives for melt reprocessed blends. PET and PE are targeted because they are two of the most prevalent commercial polymers in the world and are high volume waste streams. The work described here demonstrates two key findings. First, the PET-PE MBCPs serve as effective adhesive tie layers between neat PET/PE films with adhesive strength comparable to that of commercially available adhesives. Second, PET/PE (80/20 wt %) blends containing ∼0.5 wt % PET-PE MBCP were melt mixed to mimic recycling mixed plastic waste, and they were found to exhibit mechanical properties better than neat PET. Overall, this study demonstrates that PET-PE MBCPs could significantly enhance the ability to recycle PET/PE mixed waste streams by serving the role as both an adhesive promoting layer and a compatibilizer additive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Multiblock Polymers: Panacea or Pandora’s Box?
Bates, F. S., Hillmyer, M. A., Lodge, T. P., Bates, C. M., Delaney, K. T., & Fredrickson, G. H. (2012) · Science · doi:10.1126/science.1215368 · Cited by 1,147
Combining polyethylene and polypropylene: Enhanced performance with PE/ i PP multiblock polymers
Eagan, J. M., Xu, J., Di Girolamo, R., Thurber, C. M., Macosko, C. W., LaPointe, A. M., Bates, F. S., & Coates, G. W. (2017) · Science · doi:10.1126/science.aah5744 · Cited by 654
Compatibilizers for melt blending: premade block copolymers
Macosko, C. W., Guégan, P., Khandpur, A. K., Nakayama, A., Marechal, P., & Inoue, T. (1996) · Macromolecules · doi:10.1021/ma9602482 · Cited by 458
Albertsson, A.-C., & Hakkarainen, M. (2017) · Science · doi:10.1126/science.aap8115 · Cited by 344
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Cited by
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Why is recycling of postconsumer plastics so challenging?
Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385
Upcycling and catalytic degradation of plastic wastes
Hou, Q., Zhen, M., Qian, H., Nie, Y., Bai, X., Xia, T., Laiq Ur Rehman, M., Li, Q., & Ju, M. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100514 · Cited by 335
Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research
Haque, F. M., Ishibashi, J. S. A., Lidston, C. A. L., Shao, H., Bates, F. S., Chang, A. B., Coates, G. W., Cramer, C. J., Dauenhauer, P. J., Dichtel, W. R., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00173 · Cited by 285
Self-citationDu, M., Zhang, Y., Kang, S., Guo, X., Ma, Y., Xing, M., Zhu, Y., Chai, Y., & Qiu, B. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c03605 · Cited by 271
Metadata
- Authors
- Nomura, K., Peng, X., Kim, H., Jin, K., Kim, H. J., Bratton, A. F., Bond, C. R., Broman, A. E., Miller, K. M., & Ellison, C. J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-04
- Volume
- 12
- Issue
- 8
- Pages
- 9726-9735
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3004975688
- Cited by
- 105
- References
- 6
- FWCI
- 4.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiblock Copolymers for Recycling Polyethylene–Poly(ethylene terephthalate) Mixed Waste. https://app.cochat.ai/papers/10.1021/acsami.9b20242
- The paper
- Nomura, K., Peng, X., Kim, H., Jin, K., Kim, H. J., Bratton, A. F., Bond, C. R., Broman, A. E., Miller, K. M., & Ellison, C. J. (2020). Multiblock Copolymers for Recycling Polyethylene–Poly(ethylene terephthalate) Mixed Waste. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b20242
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.