Carbon Aerogels Loaded with Noble Metal Nanocrystal Electrocatalysts for Efficient Full Water Splitting
The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index; 4 of the 22 sources its claims cite were checked for support.
Abstract
It is always a challenge to improve the stability of the electrocatalyst and reduce noble metal loading in the process of hydrogen production from electrolytic water. Herein, we have designed a general carbon aerogel (CG) loaded with noble metal ultrafine nanocrystalline electrocatalysts for efficient full water splitting. The precursor polyethyleneimine/polydopamine co-modified cellulose nanocrystal (CNC)-loaded noble metal by the hydrothermal method and carbonized at high temperature to produce the CG-loaded noble metal ultrafine nanocatalysts (size < 2.5 nm). Through the control of components, different nanocatalysts (defined as CG-M-X, M as Pt and Ir and X as the quantity score) exhibit extraordinary electrocatalytic activity. To achieve a catalytic current of 10 mA cm –2 in 1 M KOH electrolyte, the overpotential required for hydrogen evolution was 23.6 mV for CG-Pt-1.19% and 242 mV for oxygen evolution in CG-Ir-1.62%. When assembled into the full water splitting system, CG-Pt-1.19%||CG-Ir-1.62% delivers a current density of 10 mA cm –2 at a low voltage of 1.43 V, which can steadily drive the complete decomposition of water at nearly 100% Faraday efficiency for up to 50 h without any significant performance degradation. Furthermore, the Pt 38 cluster model is constructed, the electrolytic water activity on the Pt 38 cluster is higher than the Pt(111) surface, and the N doping on CG regulates the local electric field of Pt 38 cluster, which is more conducive to the electrocatalytic hydrogen evolution reaction.
Overview
CoChat Summary
TL;DR
The authors prepare carbon aerogels (CG) from polyethyleneimine/polydopamine-modified cellulose nanocrystals loaded with ultrafine Pt and Ir nanocrystals (<2.5 nm) as HER and OER electrocatalysts, respectively, and combine them into a full water-splitting cell. The optimized pair CG-Pt-1.19%||CG-Ir-1.62% reaches 10 mA cm⁻² at 1.43 V and operates for up to 50 h at nearly 100% Faraday efficiency.
Key findings
- In 1 M KOH, CG-Pt-1.19% requires an overpotential of 23.6 mV at 10 mA cm⁻² for HER (vs 31.2 mV for commercial Pt/C), with a Tafel slope of 30.85 mV dec⁻¹ and a Cdl of 62.4 mF cm⁻² (vs 14.2 mF cm⁻² for Pt/C); its TOF at 0.1 V is 7.492 s⁻¹, ~3× that of Pt/C (1.966 s⁻¹).
- CG-Ir-1.62% requires 242 mV overpotential at 10 mA cm⁻² for OER (vs 278 mV for commercial IrO₂), with a Tafel slope of 44.3 mV dec⁻¹ (IrO₂: 33.5 mV dec⁻¹), Cdl of 92.11 mF cm⁻² (IrO₂: 23.87 mF cm⁻²), and TOF at 0.3 V of 3.64 s⁻¹, ~6× IrO₂ (0.59 s⁻¹).
- The assembled CG-Pt-1.19%||CG-Ir-1.62% two-electrode cell delivers 10 mA cm⁻² at 1.43 V (abstract and conclusion; Section 3.3 states "only 1 V cell voltage," an internal inconsistency in the text), versus 1.57 V for Pt/C||IrO₂, and runs 50 h at 10 mA with no significant decay at ~100% Faraday efficiency.
- DFT on a Pt₃₈ cluster model shows a lower water-dissociation barrier at the Pt₃₈ top site (0.439 eV) than the Pt(111) surface (0.770 eV) or Pt₃₈ side site (0.606 eV), and a smaller ΔG_H* for Pt₃₈ (−0.228 eV) and N-doped Pt₃₈–C (−0.215 eV) than Pt(111) (−0.410 eV).
Methods
- Synthesis: CNCs modified with PEI and PDA (PEI-PDA/CNCs), metal precursors (chloroplatinic or chloroiridic acid at 10–100 μL of 1 M solution per 100 mL) loaded hydrothermally at 80 °C for 2 h, freeze-dried at −48 °C, then calcined at 450 °C for 2 h; samples labeled CG-M-X (M = Pt, Ir; X = loading score).
- Characterization: XRD, TG, BET (193.08 m²/g for CG-Pt-1.19%), SEM/TEM/HRTEM with elemental mapping, XPS, and ICP-AES for metal loading; average Pt particle size ~2.16 nm.
- Electrochemistry: three-electrode LSV at 2 mV s⁻¹ in N₂-saturated 1.0 M KOH, Tafel, EIS, CV-derived Cdl, TOF, 10,000-cycle CV and constant-current stability tests; full-cell two-electrode and membrane-electrode tests with gas collection for Faraday efficiency; DFT calculations on Pt₃₈, Pt₃₈–C, and Pt(111) models.
Limitations
- The paper states no explicit limitations.
- Evident from the text: the catalysts still rely on noble metals (Pt, Ir), so the cost/loading issue is mitigated rather than eliminated; the DFT analysis uses a simplified Pt₃₈ cluster and Pt(111) slab model rather than the real supported catalyst; the reported full-cell voltage is inconsistent between the abstract/conclusion (1.43 V) and Section 3.3 (1 V), and the membrane-electrode test is limited to 40 h at up to 50 mA cm⁻².
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 1 Not valid · 8 Not checked · 53 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“found to be in perfect match with the (111) crystal plane of Pt”
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the average particle size of the Pt clusters is approximately 2.16 nm”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the Ir 4f spectrum has two pairs of deconvolution peaks (61.84, 64.79, and 62.36, 65.37 eV), associated with the 0 and +4 states, respectively”
plainstates an associationSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“a significantly smaller hydrogen binding energy GH* at the Pt38 site (−0.228 eV)”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the catalyst that was calcined at 450 °C had the lowest overpotential (ca. 23.6 mV)”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
26 more claims
Create a free account to see all 64 claims and to verify the 2 references still open.
- It may state two separate claims as one. 28
- Probably not a substantial claim. 5
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ 3. RESULTS AND DISCUSSION
“the CG-Pt-1.19%||CG-Ir-1.62%-based electrolyte requires only 1 V cell voltage to provide 10 mA cm−2 total hydrolysis current density”
§ 4. CONCLUSIONS
“CG- Pt-1.19%||CG-Ir-1.62% can achieve 10 mA cm−2 current density at a relatively small voltage of 1.43 V”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“the TOF (Figure 4e) value of CG-Pt-1.19% at 0.1 V is 7.492 s−1, which is approximately 3 times greater than that of Pt/C (1.966 s−1).”
Reported 3 · recomputed 3.810783
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3. RESULTS AND DISCUSSION
“The stability of CG-Ir-1.62% was further evaluated by timing current measurements (Figure 6f).”
§ 3. RESULTS AND DISCUSSION
“the morphological structure of CG-Pt-1.19% and the content of Pt do not change much after stability testing”
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Chen, Y., Ji, S., Wang, Y., Dong, J., Chen, W., Li, Z., Shen, R., Zheng, L., Zhuang, Z., Wang, D., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702473 · Cited by 1,988
Atomic cobalt on nitrogen-doped graphene for hydrogen generation
Fei, H., Dong, J., Arellano-Jiménez, M. J., Ye, G., Dong Kim, N., Samuel, E. L. G., Peng, Z., Zhu, Z., Qin, F., Bao, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms9668 · Cited by 1,621
Li, P., Jiang, Y., Hu, Y., Men, Y., Liu, Y., Cai, W., & Chen, S. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00846-8 · Cited by 852
Iridium Single Atoms Coupling with Oxygen Vacancies Boosts Oxygen Evolution Reaction in Acid Media
Yin, J., Jin, J., Lu, M., Huang, B., Zhang, H., Peng, Y., Xi, P., & Yan, C.-H. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c05050 · Cited by 545
Chen, W., Pei, J., He, C., Wan, J., Ren, H., Zhu, Y., Wang, Y., Dong, J., Tian, S., Cheong, W., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201710599 · Cited by 519
Self-citationRong, C., Shen, X., Wang, Y., Thomsen, L., Zhao, T., Li, Y., Lu, X., Amal, R., & Zhao, C. (2022) · Advanced Materials · doi:10.1002/adma.202110103 · Cited by 503
He, T., Chen, S., Ni, B., Gong, Y., Wu, Z., Song, L., Gu, L., Hu, W., & Wang, X. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800817 · Cited by 464
Single Carbon Vacancy Traps Atomic Platinum for Hydrogen Evolution Catalysis
Yang, Q., Liu, H., Yuan, P., Jia, Y., Zhuang, L., Zhang, H., Yan, X., Liu, G., Zhao, Y., Liu, J., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10814 · Cited by 351
Recent advances in the precise control of isolated single-site catalysts by chemical methods
Li, Z., Wang, D., Wu, Y., & Li, Y. (2018) · National Science Review · doi:10.1093/nsr/nwy056 · Cited by 325
Cited by
Zheng, N., Yang, B., Xie, J., Hu, J., Lu, Z., & Cao, Y. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173158 · Cited by 28
Beere, H. K., Shantharaja, Yatish, K. V., Aravind, K., Ghosh, D., Balakrishna, R. G., & Pramoda, K. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.12.122 · Cited by 22
Emerging Supported Metal Atomic Clusters for Electrocatalytic Renewable Conversions
Xu, H., Zhao, W., Li, D., Ding, S., Xiao, C., & Zeng, L. (2025) · ACS Catalysis · doi:10.1021/acscatal.4c07421 · Cited by 18
Yu, X., Zhang, J., Jia, Y., Yao, H., Su, B., & Guo, X. (2024) · Inorganic Chemistry Frontiers · doi:10.1039/d4qi01385a · Cited by 14
Wagh, L., Singh, D., Kumar, V., Upadhyay, S. N., Pakhira, S., & Das, A. K. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c18637 · Cited by 11
Alsuhile, A., Pein, P. S., Barım, Ş. B., Bozbağ, S. E., Smirnova, I., Erkey, C., & Schroeter, B. (2025) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202400433 · Cited by 8
Aerogels as next-generation electrocatalysts for water electrolysis and beyond
Muthukutty, B., Ponnaiah, S. K., Im, J., Periakaruppan, P., Lee, D., & Kim, Y. (2025) · Nano Today · doi:10.1016/j.nantod.2025.102901 · Cited by 8
Bawazeer, S. (2025) · Catalysts · doi:10.3390/catal15070642 · Cited by 3
Dual-Confinement Strategy Enables Highly Efficient Oxygen Reduction with Fe–N 5 Electrocatalysts
Li, S., Liu, J., Liu, Z., Yang, C., Li, J., Lin, Z., & Gao, L. (2026) · Research · doi:10.34133/research.1333 · Cited by 2
“O···Fe 3 + bonds under acidic conditions [ 15 , 16 ].”
Nitrogen-doped carbon-supported CoRu nanoalloys for enhanced pH-universal hydrogen evolution
Min, X., Xiao, R., Zhang, B., Shi, B., Gao, J., Sun, X., Wu, Z., Li, A., Wang, Y., & Deng, Y. (2025) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2025.125800 · Cited by 1
Metadata
- Authors
- Wang, W., Pan, Z., Zhang, Z., Zhu, Y., & Shen, J.
- Affiliations
- East China University of Science and Technology (CN)
- South China Normal University (CN)
- Corresponding author
- Zhang, Zhen
- Shen, Jianhua
- Venue
- ACS Applied Nano Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-06-21
- Volume
- 6
- Issue
- 13
- Pages
- 12150-12158
- ISSN
- 2574-0970 (ISSN-L)
- OpenAlex
- W4381743061
- Semantic Scholar
- 846223feda81093397fe8f1ebd29645e7b18e70f
- Cited by
- 14
- References
- 53
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 2 · 2023: 1
- FWCI
- 0.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Nano Materials (publishedVersion)
- Funders
- Fundamental Research Funds for the Central Universities (222201718002)
- National Natural Science Foundation of China (21978087, 22178106, 22278136, U22B20143)
- Science and Technology Commission of Shanghai Municipality (23ZR1416400, 22dz1205900)
- Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutes of High Learning
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- carbon aerogels, noble metal nanocrystals, water splitting, hydrogen evolution reaction, oxygen evolution reaction, platinum, iridium, nitrogen doping, electrocatalyst stability, noble metal loading reduction, alkaline water electrolysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.