CoChat

Carbon Aerogels Loaded with Noble Metal Nanocrystal Electrocatalysts for Efficient Full Water Splitting

Wang, Wenhui, Pan, Zhenping, Zhang, Zhen, Zhu, Yihua, Shen, Jianhua · 2023 · ACS Applied Nano Materials

The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index; 4 of the 22 sources its claims cite were checked for support.

Abstract

It is always a challenge to improve the stability of the electrocatalyst and reduce noble metal loading in the process of hydrogen production from electrolytic water. Herein, we have designed a general carbon aerogel (CG) loaded with noble metal ultrafine nanocrystalline electrocatalysts for efficient full water splitting. The precursor polyethyleneimine/polydopamine co-modified cellulose nanocrystal (CNC)-loaded noble metal by the hydrothermal method and carbonized at high temperature to produce the CG-loaded noble metal ultrafine nanocatalysts (size < 2.5 nm). Through the control of components, different nanocatalysts (defined as CG-M-X, M as Pt and Ir and X as the quantity score) exhibit extraordinary electrocatalytic activity. To achieve a catalytic current of 10 mA cm –2 in 1 M KOH electrolyte, the overpotential required for hydrogen evolution was 23.6 mV for CG-Pt-1.19% and 242 mV for oxygen evolution in CG-Ir-1.62%. When assembled into the full water splitting system, CG-Pt-1.19%||CG-Ir-1.62% delivers a current density of 10 mA cm –2 at a low voltage of 1.43 V, which can steadily drive the complete decomposition of water at nearly 100% Faraday efficiency for up to 50 h without any significant performance degradation. Furthermore, the Pt 38 cluster model is constructed, the electrolytic water activity on the Pt 38 cluster is higher than the Pt(111) surface, and the N doping on CG regulates the local electric field of Pt 38 cluster, which is more conducive to the electrocatalytic hydrogen evolution reaction.

Overview

CoChat Summary

TL;DR

The authors prepare carbon aerogels (CG) from polyethyleneimine/polydopamine-modified cellulose nanocrystals loaded with ultrafine Pt and Ir nanocrystals (<2.5 nm) as HER and OER electrocatalysts, respectively, and combine them into a full water-splitting cell. The optimized pair CG-Pt-1.19%||CG-Ir-1.62% reaches 10 mA cm⁻² at 1.43 V and operates for up to 50 h at nearly 100% Faraday efficiency.

Key findings

  • In 1 M KOH, CG-Pt-1.19% requires an overpotential of 23.6 mV at 10 mA cm⁻² for HER (vs 31.2 mV for commercial Pt/C), with a Tafel slope of 30.85 mV dec⁻¹ and a Cdl of 62.4 mF cm⁻² (vs 14.2 mF cm⁻² for Pt/C); its TOF at 0.1 V is 7.492 s⁻¹, ~3× that of Pt/C (1.966 s⁻¹).
  • CG-Ir-1.62% requires 242 mV overpotential at 10 mA cm⁻² for OER (vs 278 mV for commercial IrO₂), with a Tafel slope of 44.3 mV dec⁻¹ (IrO₂: 33.5 mV dec⁻¹), Cdl of 92.11 mF cm⁻² (IrO₂: 23.87 mF cm⁻²), and TOF at 0.3 V of 3.64 s⁻¹, ~6× IrO₂ (0.59 s⁻¹).
  • The assembled CG-Pt-1.19%||CG-Ir-1.62% two-electrode cell delivers 10 mA cm⁻² at 1.43 V (abstract and conclusion; Section 3.3 states "only 1 V cell voltage," an internal inconsistency in the text), versus 1.57 V for Pt/C||IrO₂, and runs 50 h at 10 mA with no significant decay at ~100% Faraday efficiency.
  • DFT on a Pt₃₈ cluster model shows a lower water-dissociation barrier at the Pt₃₈ top site (0.439 eV) than the Pt(111) surface (0.770 eV) or Pt₃₈ side site (0.606 eV), and a smaller ΔG_H* for Pt₃₈ (−0.228 eV) and N-doped Pt₃₈–C (−0.215 eV) than Pt(111) (−0.410 eV).

Methods

  • Synthesis: CNCs modified with PEI and PDA (PEI-PDA/CNCs), metal precursors (chloroplatinic or chloroiridic acid at 10–100 μL of 1 M solution per 100 mL) loaded hydrothermally at 80 °C for 2 h, freeze-dried at −48 °C, then calcined at 450 °C for 2 h; samples labeled CG-M-X (M = Pt, Ir; X = loading score).
  • Characterization: XRD, TG, BET (193.08 m²/g for CG-Pt-1.19%), SEM/TEM/HRTEM with elemental mapping, XPS, and ICP-AES for metal loading; average Pt particle size ~2.16 nm.
  • Electrochemistry: three-electrode LSV at 2 mV s⁻¹ in N₂-saturated 1.0 M KOH, Tafel, EIS, CV-derived Cdl, TOF, 10,000-cycle CV and constant-current stability tests; full-cell two-electrode and membrane-electrode tests with gas collection for Faraday efficiency; DFT calculations on Pt₃₈, Pt₃₈–C, and Pt(111) models.

Limitations

  • The paper states no explicit limitations.
  • Evident from the text: the catalysts still rely on noble metals (Pt, Ir), so the cost/loading issue is mitigated rather than eliminated; the DFT analysis uses a simplified Pt₃₈ cluster and Pt(111) slab model rather than the real supported catalyst; the reported full-cell voltage is inconsistent between the abstract/conclusion (1.43 V) and Section 3.3 (1 V), and the membrane-electrode test is limited to 40 h at up to 50 mA cm⁻².

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsanm.3c01899

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

2 Valid · 1 Not valid · 8 Not checked · 53 Own results and interpretations

26 more claims

Create a free account to see all 64 claims and to verify the 2 references still open.

See all claims — free account
  • It may state two separate claims as one. 28
  • Probably not a substantial claim. 5
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Cited by

See all 14

Metadata

Authors
Wang, W., Pan, Z., Zhang, Z., Zhu, Y., & Shen, J.
Affiliations
  • East China University of Science and Technology (CN)
  • South China Normal University (CN)
Corresponding author
  • Zhang, Zhen
  • Shen, Jianhua
Venue
ACS Applied Nano Materials
Published
2023-06-21
Volume
6
Issue
13
Pages
12150-12158
ISSN
2574-0970 (ISSN-L)
OpenAlex
W4381743061
Cited by
14
References
53
Citations by year
2026: 5 · 2025: 6 · 2024: 2 · 2023: 1
FWCI
0.67
Type
journal article
Language
en
Open access
closed
Locations
ACS Applied Nano Materials (publishedVersion)
Funders
  • Fundamental Research Funds for the Central Universities (222201718002)
  • National Natural Science Foundation of China (21978087, 22178106, 22278136, U22B20143)
  • Science and Technology Commission of Shanghai Municipality (23ZR1416400, 22dz1205900)
  • Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutes of High Learning
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Keywords
carbon aerogels, noble metal nanocrystals, water splitting, hydrogen evolution reaction, oxygen evolution reaction, platinum, iridium, nitrogen doping, electrocatalyst stability, noble metal loading reduction, alkaline water electrolysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.