CoChat

Controlling Ionomer Film Morphology through Altering Pt Catalyst Surface Properties for Polymer Electrolyte Membrane Fuel Cells

Lee, Ji Hye, Doo, Gisu, Kwon, Sung Hyun, Kang, Haisu, Choi, Sungyu, Yim, Sung-Dae, Kim, Hee-Tak, Lee, Seung Geol · 2020 · ACS Applied Polymer Materials

The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.

Abstract

In this study, molecular dynamics simulations were used to understand the effects of the surface properties of the catalyst on ionomer film morphology by switching the nature of the catalyst surface from hydrophilic to hydrophobic. Equilibrium structures and radial distribution functions reveal that the surface properties affect the ionomer film morphology and the dispersion solvent on the catalyst surface. For a Pt surface, water molecules and the sulfonate groups of the ionomer are mainly situated in close proximity to the Pt surface, which is due to the hydrophilicity of water and the sulfonate groups that interact strongly with the hydrophilic Pt surface. In the case of the alkylthiol-modified Pt surface, dipropylene–glycol molecules and the backbones of the Nafion ionomers are distributed in the immediate proximity of the alkylthiol-modified Pt surface owing to favorable hydrophobic–hydrophobic interactions. In addition, the accompanying transport properties of water molecules also depend on the nature of the catalyst surface. The calculated diffusion coefficients show that water molecules diffuse faster on the alkylthiol-modified Pt surface than on the pure Pt surface and that the diffusion coefficient gradually decreases as the amount of the dipropylene–glycol/water solvent used to disperse the Nafion solution is reduced.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsapm.0c00042

Cites

50 of 50 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. 2018, Materials Studio

Cited by

See all 27

Metadata

Authors
Lee, J. H., Doo, G., Kwon, S. H., Kang, H., Choi, S., Yim, S.-D., Kim, H.-T., & Lee, S. G.
Affiliations
  • Pusan National University (KR)
  • Korea Advanced Institute of Science and Technology (KR)
  • Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
  • Korea Institute of Energy Research (KR)
Corresponding author
  • Kim, Hee-Tak
  • Lee, Seung Geol
Venue
ACS Applied Polymer Materials
Published
2020-04-10
Volume
2
Issue
5
Pages
1807-1818
ISSN
2637-6105 (ISSN-L)
OpenAlex
W3016169185
Cited by
27
References
50
Citations by year
2026: 2 · 2025: 1 · 2024: 2 · 2023: 4 · 2022: 9 · 2021: 6 · 2020: 3
FWCI
1.89
Type
journal article
Language
en
Open access
closed
Locations
ACS Applied Polymer Materials (publishedVersion)
Funders
National Research Foundation of Korea (2015M1A2A2057127, 2015M1A2A2057129, 2016M1A2A2937151)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
proton exchange membrane fuel cells, hydrophobicity, hydrophilicity, Nafion ionomer, water diffusion, water transport, sulfonate groups

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.