The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Dual Conductive Network Hydrogel for a Highly Conductive, Self-Healing, Anti-Freezing, and Non-Drying Strain Sensor
Abstract
Self-healing hydrogel plays an important role in flexible sensors. However, the development of high-performance hydrogel-based strain sensors with both high sensitivity and large sensing range remains a key challenge. Herein, we prepare a dual conductive network (DCN) hydrogel based on carbon nanotube (CNT) film and conductive hydrogel that exhibits high-conductivity, self-healing, anti-freezing, and non-drying features. The tolerance of this hydrogel to extreme temperatures is improved via a simple solvent replacement, enabling the DCN hydrogel to maintain high flexibility and stretchability under arduous conditions such as temperatures ranging from −85 to 50 °C. Additionally, owing to the dual conductive percolation network structure, the strain sensor based on DCN hydrogel exhibits a gauge factor as high as 343 at a strain of 110%, indicating high sensitivity. The mechanical and electrical performances of the hydrogel would be efficiently self-repaired after a simple heating–cooling treatment. The self-healing sensor can be mounted on the human body to detect biosignals in real time. Our work shows a method of fabricating high-performance self-healing hydrogel for future flexible electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cai, G., Wang, J., Qian, K., Chen, J., Li, S., & Lee, P. S. (2017) · Advanced Science · doi:10.1002/advs.201600190 · Cited by 921
Wu, J., Wu, Z., Xu, H., Wu, Q., Liu, C., Yang, B.-R., Gui, X., Xie, X., Tao, K., Shen, Y., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01160e · Cited by 391
Self-citationPan, X., Wang, Q., Ning, D., Dai, L., Liu, K., Ni, Y., Chen, L., & Huang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00657 · Cited by 228
Wu, J., Wu, Z., Han, S., Yang, B.-R., Gui, X., Tao, K., Liu, C., Miao, J., & Norford, L. K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17437 · Cited by 225
Self-citation
Cited by
Development of Conductive Hydrogels for Fabricating Flexible Strain Sensors
Li, G., Li, C., Li, G., Yu, D., Song, Z., Wang, H., Liu, X., Liu, H., & Liu, W. (2022) · Small · doi:10.1002/smll.202101518 · Cited by 509
Conductive Hydrogel- and Organohydrogel-Based Stretchable Sensors
Wu, Z., Yang, X., & Wu, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c21841 · Cited by 393
Self-citationGe, W., Cao, S., Yang, Y., Rojas, O. J., & Wang, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127306 · Cited by 386
Functional Conductive Hydrogels for Bioelectronics
Fu, F., Wang, J., Zeng, H., & Yu, J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00309 · Cited by 364
Li, S.-N., Yu, Z.-R., Guo, B.-F., Guo, K.-Y., Li, Y., Gong, L.-X., Zhao, L., Bae, J., & Tang, L.-C. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106502 · Cited by 341
Metadata
- Authors
- Han, S., Liu, C., Lin, X., Zheng, J., Wu, J., & Liu, C.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-10
- Volume
- 2
- Issue
- 2
- Pages
- 996-1005
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W2999505300
- Cited by
- 224
- References
- 4
- FWCI
- 11.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.