Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics
The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
Marine pollution stemming from plastic microbeads (MBs) in personal care products has been substantially increased because of their nonbiodegradability and high adsorption capacity against persistent organic pollutants (POPs) in seawater. Moreover, the manufacturing process of MBs has been based on wet processes, such as emulsification, microfluidics, and precipitation. Therefore, a green process for obtaining biodegradable MBs is urgently necessary. Aliphatic polyesters, such as poly(lactic acid) (PLA, radiation-degradable) and poly(ε-caprolactone) (PCL, radiation-cross-linkable), have biodegradability and melt processability. The eco-friendly melt electrospraying process is a simple and cost-effective method for the preparation of MBs without the need for organic reagents. In this study, the PLA and PCL MBs were obtained by adjusting the main processing parameters during the melt electrospraying process. The weight losses of PLA and PCL MBs in aqueous environments occurred faster than those of positive controls, and the thermal transition parameters were decreased with the hydrolytic degradation of MBs. In the POP adsorption test, the biodegradable MBs showed poor adsorption because of their low specific surface area. The results of the cleansing efficiency test indicated that biodegradable MBs have great potential as more sustainable cosmetics to replace nondegradable MBs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Approximately 90% of the model bioactive compounds were successfully released after 7 h, providing a steady and prolonged release.”
In the citing paper
“Release studies showed that the porous beads can be employed for the encapsulation and release of active compounds with different chemical structures.”
In the citing paper
“King et al. [64], working with the precursor of chitosan (i.e., chitin), prepared biodegradable, biocompatible, and porous µ Bs of low toxicity using the ionic liquid (IL) 1-ethyl-3methylimidazo-lium acetate ([C2mim][OAc]).”
Citations
Cites
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Jeong, C.-B., Won, E.-J., Kang, H.-M., Lee, M.-C., Hwang, D.-S., Hwang, U.-K., Zhou, B., Souissi, S., Lee, S.-J., & Lee, J.-S. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01441 · Cited by 1,233
Microplastic contamination of river beds significantly reduced by catchment-wide flooding
Hurley, R., Woodward, J., & Rothwell, J. J. (2018) · Nature Geoscience · doi:10.1038/s41561-018-0080-1 · Cited by 1,003
Characterisation, quantity and sorptive properties of microplastics extracted from cosmetics
Napper, I. E., Bakir, A., Rowland, S. J., & Thompson, R. C. (2015) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2015.07.029 · Cited by 980
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Chemical Pollutants Sorbed to Ingested Microbeads from Personal Care Products Accumulate in Fish
Wardrop, P., Shimeta, J., Nugegoda, D., Morrison, P. D., Miranda, A., Tang, M., & Clarke, B. O. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b06280 · Cited by 493
Ziajahromi, S., Kumar, A., Neale, P. A., & Leusch, F. D. L. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03574 · Cited by 456
Fate of So‐Called Biodegradable Polymers in Seawater and Freshwater
Bagheri, A. R., Laforsch, C., Greiner, A., & Agarwal, S. (2017) · Global Challenges · doi:10.1002/gch2.201700048 · Cited by 389
Lee, B. K., Yun, Y., & Park, K. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.020 · Cited by 340
Radiation Processing of Polymer Materials and its Industrial Applications
Makuuchi, K., & Cheng, S. (2012) · Wiley eBooks · doi:10.1002/9781118162798 · Cited by 302
Loo, J. S. C., Ooi, C. P., & Boey, F. Y. C. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.001 · Cited by 277
Wang, Q., Yu, D.-G., Zhang, L.-L., Liu, X.-K., Deng, Y.-C., & Zhao, M. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.075 · Cited by 172
Electrospray Encapsulation of Hydrophilic and Hydrophobic Drugs in Poly(L‐lactic acid) Nanoparticles
Valo, H., Peltonen, L., Vehviläinen, S., Karjalainen, M., Kostiainen, R., Laaksonen, T., & Hirvonen, J. (2009) · Small · doi:10.1002/smll.200801907 · Cited by 158
Sustainable and recyclable super engineering thermoplastic from biorenewable monomer
Park, S., Jeon, H., Kim, H., Shin, S., Choy, S., Hwang, D. S., Koo, J. M., Jegal, J., Hwang, S. Y., Park, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10582-6 · Cited by 151
Nath, S. D., Son, S., Sadiasa, A., Min, Y. K., & Lee, B. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.12.037 · Cited by 146
A study on the in vitro degradation of poly(lactic acid)
Migliaresi, C., Fambri, L., & Cohn, D. (1994) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856294x00220 · Cited by 140
Hierarchical Porous Chitosan Sponges as Robust and Recyclable Adsorbents for Anionic Dye Adsorption
Wang, M., Ma, Y., Sun, Y., Hong, S. Y., Lee, S. K., Yoon, B., Chen, L., Ci, L., Nam, J.-D., Chen, X., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-18302-0 · Cited by 140
Zhou, H., Shi, Z., Wan, X., Fang, H., Yu, D., Chen, X., & Liu, P. (2019) · Nanomaterials · doi:10.3390/nano9060843 · Cited by 129
A review of the biodegradability and utility of poly(caprolactone)
Goldberg, D. (1995) · Journal of Polymers and the Environment · doi:10.1007/bf02067481 · Cited by 126
Fate of Nanoplastics in Marine Larvae: A Case Study Using Barnacles, Amphibalanus amphitrite
Bhargava, S., Lee, S. S. C., Ying, L. S. M., Neo, M. L., Teo, S. L., & Valiyaveettil, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00766 · Cited by 122
Biodegradation of poly(ε-caprolactone) in natural water environments
Heimowska, A., Morawska, M., & Bocho–Janiszewska, A. (2017) · Green Sciences · doi:10.1515/pjct-2017-0017 · Cited by 118
Electrospraying of polymer solutions: Study of formulation and process parameters
Smeets, A., Clasen, C., & den Mooter, G. V. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.06.010 · Cited by 110
Structural changes of polylactic-acid (PLA) microspheres under hydrolytic degradation
Gonzalez, M. F., Ruseckaite, R. A., & Cuadrado, T. R. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990222)71:8<1223::aid-app2>3.0.co;2-i · Cited by 107
Oluniyi Solomon, O., & Palanisami, T. (2016) · Journal of Pollution Effects & Control · doi:10.4172/2375-4397.1000161 · Cited by 97
A platform for more sustainable chitin films from an ionic liquid process
King, C., Shamshina, J. L., Gurau, G., Berton, P., Khan, N. F. A. F., & Rogers, R. D. (2017) · Green Chemistry · doi:10.1039/c6gc02201d · Cited by 96
Macali, A., Semenov, A., Venuti, V., Crupi, V., D’Amico, F., Rossi, B., Corsi, I., & Bergami, E. (2018) · Scientific Reports · doi:10.1038/s41598-018-24427-7 · Cited by 92
Thermal, rheological and morphological properties of poly (lactic acid) (PLA) and talc composites
Silva, A. L. N., Cipriano, T. F., ASilva, N. H. M. D. F. T. D., Rocha, M. C. C. G., Sousa, A. F., & Silva, G. M. D. (2014) · Polímeros Ciência e Tecnologia · doi:10.4322/polimeros.2014.067 · Cited by 85
Continuous Production of Cellulose Microbeads via Membrane Emulsification
Coombs OBrien, J., Torrente-Murciano, L., Mattia, D., & Scott, J. L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00662 · Cited by 84
Microparticles based on natural and synthetic polymers for cosmetic applications
Kozlowska, J., Prus, W., & Stachowiak, N. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.02.091 · Cited by 82
Porous Chitin Microbeads for More Sustainable Cosmetics
King, C. A., Shamshina, J. L., Zavgorodnya, O., Cutfield, T., Block, L. E., & Rogers, R. D. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03053 · Cited by 78
Gui, Z., Lu, C., & Cheng, S. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.08.011 · Cited by 73
Madera-Santana, T. J., Meléndrez, R., González‐García, G., Quintana, P., & Pillai, S. D. (2016) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2016.02.001 · Cited by 69
Boucher, C., Morin, M., & Bendell, L. I. (2015) · Regional Studies in Marine Science · doi:10.1016/j.rsma.2015.11.009 · Cited by 65
Electrospraying of environmentally sustainable alginate microbeads for cosmetic additives
Bae, S. B., Nam, H. C., & Park, W. H. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.04.058 · Cited by 57
Self-citation“Practical” Electrospinning of Biopolymers in Ionic Liquids
Shamshina, J. L., Zavgorodnya, O., Bonner, J. R., Gurău, G., Nardo, T. D., & Rogers, R. D. (2016) · ChemSusChem · doi:10.1002/cssc.201601372 · Cited by 56
The Biodegradation of Biodegradable Polymeric Biomaterials
Lin, C., & Anseth, K. S. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087780-8.00061-9 · Cited by 49
Huang, W., Hou, Y., Lu, X., Gong, Z., Yang, Y., Lu, X., Lu, X., & Lu, X. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11050226 · Cited by 36
Xiao, X., Tian, F., Yan, Y., Wu, Z., Wu, Z., & Cravotto, G. (2015) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0317-7 · Cited by 34
Development of polylactide microspheres for protein encapsulation and delivery
Chandy, T., Das, G. S., Wilson, R. F., & Rao, G. H. R. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11139 · Cited by 34
Studies on the sorption behaviors of phenanthrene on marine sediments
Yang, G., & Zheng, X. (2009) · Environmental Toxicology and Chemistry · doi:10.1002/etc.270 · Cited by 21
Cheon, J. Y., & Park, W. H. (2017) · Polymer · doi:10.1016/j.polymer.2017.08.005 · Cited by 14
Self-citationKitsongsermthon, J., Duangweang, K., Kreepoke, J., & Tansirikongkol, A. (2017) · Skin Research and Technology · doi:10.1111/srt.12365 · Cited by 10
Research works printed but not linked: 2
- Leslie H. A., 2014, Review of Microplastics in Cosmetics
- Ritter, L.; Solomon, K.; Forget, J. R.; Stemeroff, M.; O’leary, C. A review of selected persistent organic pollutants. International Programme on Chemical Safety (IPCS), 1995.
Cited by
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Roadmap to Biodegradable Plastics—Current State and Research Needs
Ghosh, K., & Jones, B. H. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00801 · Cited by 260
Applications of Natural, Semi-Synthetic, and Synthetic Polymers in Cosmetic Formulations
Alves, T. F. R., Morsink, M., Batain, F., Chaud, M. V., Almeida, T., Fernandes, D. A., da Silva, C. F., Souto, E. B., & Severino, P. (2020) · Cosmetics · doi:10.3390/cosmetics7040075 · Cited by 196
Kukkola, A., Chetwynd, A. J., Krause, S., & Lynch, I. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.135053 · Cited by 85
Biodegradable chito-beads replacing non-biodegradable microplastics for cosmetics
Ju, S., Shin, G., Lee, M., Koo, J. M., Jeon, H., Ok, Y. S., Hwang, D. S., Hwang, S. Y., Oh, D. X., & Park, J. (2021) · Green Chemistry · doi:10.1039/d1gc01588e · Cited by 82
Metadata
- Authors
- Nam, H. C., & Park, W. H.
- Affiliations
- Chungnam National University (KR)
- Corresponding author
- Park, Won Ho
- ORCID
- Park, Won Ho
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-03-09
- Volume
- 6
- Issue
- 4
- Pages
- 2440-2449
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W3012314086
- Cited by
- 29
- References
- 43
- Citations by year
- 2026: 5 · 2025: 2 · 2024: 9 · 2023: 3 · 2022: 4 · 2021: 3 · 2020: 3
- FWCI
- 0.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Research Foundation of Korea (2018R1A2A2A05021100)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- aliphatic polyesters, polylactic acid, polycaprolactone, marine plastic pollution, personal care products, persistent organic pollutants, adsorption, hydrolytic degradation, sustainable cosmetics
- MeSH terms
- Biocompatible Materials, Capsules, Cosmetics, Microspheres, Polyesters
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.