The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Abstract
The development of printable biomaterial inks is critical to the application of 3D printing in biomedicine. To print high-resolution structures with fidelity to a computer-aided design, materials used in 3D printing must be capable of being deposited on a surface and maintaining a printed structure. A dual-cross-linking hyaluronic acid system was studied here as a printable hydrogel ink, which encompassed both shear-thinning and self-healing behaviors via guest-host bonding, as well as covalent cross-linking for stabilization using photopolymerization. When either guest-host assembly or covalent cross-linking was used alone, long-term stable structures were not formed, because of network relaxation after printing or dispersion of the ink filaments prior to stabilization, respectively. The dual-cross-linking hydrogel filaments formed structures with greater than 16 layers that were stable over a month with no loss in mechanical properties and the printed filament size ranged from 100 to 500 μm, depending on printing parameters (needle size, speed, and extrusion flux). Printed structures were further functionalized (i.e., RGD peptide) to support cell adhesion. This work highlights the importance of ink formulation and cross-linking on the printing of stable hydrogel structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
Self-citationCurrent advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citationSchuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Controlled Degradation and Mechanical Behavior of Photopolymerized Hyaluronic Acid Networks
Burdick, J. A., Chung, C., Jia, X., Randolph, M. A., & Langer, R. (2005) · Biomacromolecules · doi:10.1021/bm049508a · Cited by 777
Self-citationYi, H., Wu, L.-Q., Bentley, W. E., Ghodssi, R., Rubloff, G. W., Culver, J. N., & Payne, G. F. (2005) · Biomacromolecules · doi:10.1021/bm050410l · Cited by 759
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Recent advances in hyaluronic acid hydrogels for biomedical applications
Highley, C. B., Prestwich, G. D., & Burdick, J. A. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.02.008 · Cited by 588
Self-citationThree-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Self-citationViability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Photocrosslinkable polysaccharides forin situ hydrogel formation
Smeds, K. A., & Grinstaff, M. W. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200101)54:1<115::aid-jbm14>3.0.co;2-q · Cited by 471
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Rodell, C. B., Kaminski, A. L., & Burdick, J. A. (2013) · Biomacromolecules · doi:10.1021/bm401280z · Cited by 425
Self-citationPhotocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Dynamically Crosslinked Gold Nanoparticle – Hyaluronan Hydrogels
Skardal, A., Zhang, J., McCoard, L., Oottamasathien, S., & Prestwich, G. D. (2010) · Advanced Materials · doi:10.1002/adma.201001436 · Cited by 248
Chung, C., Beecham, M., Mauck, R. L., & Burdick, J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.04.040 · Cited by 229
Self-citationDrop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Supramolecular Guest–Host Interactions for the Preparation of Biomedical Materials
Rodell, C. B., Mealy, J. E., & Burdick, J. A. (2015) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.5b00483 · Cited by 187
Self-citationThree-dimensional bioprinting of embryonic stem cells directs highly uniform embryoid body formation
Ouyang, L., Yao, R., Mao, S., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044101 · Cited by 161
Self-citationProtease-degradable electrospun fibrous hydrogels
Wade, R. J., Bassin, E. J., Rodell, C. B., & Burdick, J. A. (2015) · Nature Communications · doi:10.1038/ncomms7639 · Cited by 157
Self-citationTous, E., Ifkovits, J. L., Koomalsingh, K. J., Shuto, T., Soeda, T., Kondo, N., Gorman, J. H., Gorman, R. C., & Burdick, J. A. (2011) · Biomacromolecules · doi:10.1021/bm201198x · Cited by 149
Self-citationOuyang, L., Yao, R., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015010 · Cited by 120
Self-citationSelective Proteolytic Degradation of Guest–Host Assembled, Injectable Hyaluronic Acid Hydrogels
Rodell, C. B., Wade, R. J., Purcell, B. P., Dusaj, N. N., & Burdick, J. A. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/ab5001673 · Cited by 84
Self-citationChopra, A., Lin, V., McCollough, A., Atzet, S. K., Prestwich, G. D., Wechsler, A. S., Murray, M. E., Oake, S. A., Kresh, J. Y., & Janmey, P. A. (2011) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2011.11.023 · Cited by 83
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Self-citation3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Metadata
- Authors
- Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-09
- Volume
- 2
- Issue
- 10
- Pages
- 1743-1751
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2406723148
- Cited by
- 607
- References
- 33
- FWCI
- 26.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.