CoChat

Preparation and Statistical Characterization of Tunable Porous Sponge Scaffolds using UV Cross-linking of Methacrylate-Modified Silk Fibroin

Open access
Bucciarelli, Alessio, Muthukumar, Thangavelu, Kim, Jin Su, Kim, Won Kyung, Quaranta, Alberto, Maniglio, Devid, Khang, Gilson, Motta, Antonella · 2019 · ACS Biomaterials Science & Engineering
Cited by 70

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Silk fibroin sponges have been widely studied and reported in literature for tissue engineering applications. Several fabrication methods have been proposed during the years to cover most of the demands in terms of properties, which should be adapted to the considered tissue. Most of these procedures are based on the secondary structure transition of the protein to the stable β crystalline form. This transition, known as physical cross-linking, makes the sponge resistant to dissolution in water, and, in general, increases the sponge stiffness. In our work, we propose an alternative method to ensure the stability of the sponge based on chemical cross-linking of a methacrylated version of silk fibroin (Sil-MA) obtained via chemical modification. The Sil-MA water solution with the addition of a photoinitiator (LAP) allows the opening, under UV radiation, of a double carbon–carbon bond and radical polymerization. The incorporation of air bubbles (that serves as a template for the pores) was accomplished by a mixer; then, the foam was stabilized under UV light and the excess water was removed by freeze-drying. Because of the cytotoxicity of the photoinitiator (found when used at a high concentration), an additional washing step in water has been introduced to eliminate the residues and improve the cells’ viability. Fourier transform infrared (FTIR) analysis confirmed the functionalization of the protein. To evaluate the effect of the composition on the sponge properties, a 2 3 full factorial design of the experiment has been adopted. FTIR analysis revealed that the sponge composition did not affect the protein’s secondary structure. The analysis of images obtained by SEM allowed some statistical measures of the porosity curves to be studied and modeled. The same modeling procedure was applied to the dissolution test in a simulated body fluid, to the water absorption, and to the cell viability (tested by the MTT and LDH assays). An empirical model for each property was built, showing how by changing the composition it is possible to tune the sponge properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsbiomaterials.9b00814

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 70

Metadata

Authors
Bucciarelli, A., Muthukumar, T., Kim, J. S., Kim, W. K., Quaranta, A., Maniglio, D., Khang, G., & Motta, A.
Venue
ACS Biomaterials Science & Engineering
Published
2019-11-12
Volume
5
Issue
12
Pages
6374-6388
ISSN
2373-9878 (ISSN-L)
OpenAlex
W2988199981
Cited by
70
References
3
FWCI
2.09
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.